Dergiler / Teknik Dergi / 2021 / Cilt: 32 - Sayı: 6

Buckling Analysis of Symmetrically Laminated Rectangular Thin Plates under Biaxial Compression

Sayfa
11287–11314
Yayın Tarihi
2021-11-01
DOI
—
🏛️Bu makalenin bibliyografik verileri ve tam metin bağlantısı DergiPark üzerinden sağlanmıştır.
DergiPark Kaydı ↗
✨

Yapay Zeka Hızlı Bakış & Çıkarımlar

AI Insight
⚡ TL;DR(1 Cümlede Hızlı Çıkarım)

Non-dimensional results were tabulated and presented for practical use for designers.

📌 3 Maddede Bu Makale

🎯
Amaç & Hipotez:In this parametric study, the buckling analysis of symmetrically laminated rectangular thin plates subjected to biaxial compression is presented.
📊
Temel Bulgular & Veri:The simply supported boundary condition is considered at the edges of the symmetrically laminated quasi-isotropic, cross-ply and angle-ply plates.
💡
Sonuç & Katkı:Non-dimensional results were tabulated and presented for practical use for designers.
🔬Tür:Araştırma Makalesi
📍Kapsam:Genişletilmiş Akademik Örneklem
⚙️Değişkenler:Bi-axial buckling · laminated thin plate · Rayleigh-Ritz Method

Özet

In this parametric study, the buckling analysis of symmetrically laminated rectangular thin plates subjected to biaxial compression is presented. The simply supported boundary condition is considered at the edges of the symmetrically laminated quasi-isotropic, cross-ply and angle-ply plates. The Rayleigh-Ritz Method is used to specify the critical buckling load of the plates based on the Classical Laminated Plate Theory (CLPT). A convergence study is achieved by increasing the number of parameters of assumed shape function. Validation of isotropic case is verified. The effects of the lamination types, plate aspect ratios (a/b, b/a) and thickness on the critical buckling load of the laminated plates under bi-axial compression were then investigated. The results were compared with Finite Element Method (FEM) solutions performed by ANSYS software package and fairly good agreement is obtained. Non-dimensional results were tabulated and presented for practical use for designers.

Abstract

In this parametric study, the buckling analysis of symmetrically laminated rectangular thin plates assumed to be subjected to biaxial compression was presented. The simply supported boundary condition was considered at the edges of the symmetrically laminated quasi-isotropic, cross-ply and angle-ply plates. The Rayleigh-Ritz Method was used to specify the critical buckling load of the plates based on the Classical Laminated Plate Theory (CLPT). A convergence study was achieved by increasing the number of parameters of assumed shape function. Validation of isotropic case was verified. The effects of the lamination types, plate aspect ratios (a/b, b/a) and thickness on the critical buckling load of the laminated plates under bi-axial compression were then investigated. The results were compared with Finite Element Method (FEM) solutions performed by ANSYS software package and fairly good agreement was obtained. Non-dimensional results were tabulated and presented for practical use for designers.

🔖

Bu Makaleye Atıf Yap

ALTUNSARAY, E., BAYER, İ. (2021). Buckling Analysis of Symmetrically Laminated Rectangular Thin Plates under Biaxial Compression. Teknik Dergi, Cilt: 32 - Sayı: 6, 11287–11314. https://ajindex.com/articles/386402

📄 Tam Metin PDF Okuyucu

📄

PDF görüntüleyici hazırlanıyor...

Kaynakça (15)

  1. Lekhnitskii, S. G., Anisotropic plates, second ed, translated from the Russian by S. W. Tsai and T. Cheron, Gordon and Breach, New York.,1968.
  2. Ambartsumyan, S. A.,Theory of anisotropic plates, Technomic Publishing, Stamford CT., 1970.
  3. Ashton, J. E. and Whitney, J. M., Theory of laminated plates, Technomic [43 Publishing, Stamford CT. 1970.
  4. Szilard R., Theory and analysis of plates: classical and numerical methods. Englewood Cliffs, New Jersey: Prentice-Hall, 1974.
  5. Jones, R. M., Mechanics of composite materials, Scripta, Washington DC, 1975.
  6. Chia, C.Y, Nonlinear analysis of plates, McGraw-Hill, New York, 1980.
  7. Leissa, A. W., A review of laminated composite plate buckling, Appl Mech Rev vol 40, no 5, May, 575-591, 1987.
  8. Tung, T. K. and Surdenas, J., Buckling of Rectangular Orthotropic Plates Under Biaxial Loading, Journal of Composite Materials, Vol. 21-February, 124-128, 1987.
  9. Nagendra, S., Haftka, R.T. and Gurdal, Z., Stacking sequence optimization of simply supported laminates with stability and strain constraints, AIAA-92-2310-CP-2526-2535, 1992.
  10. Zhang, J.W., Buckling and Postbuckling of Unsymmetrically Laminated Angle-ply Plates in Uniaxial and Biaxial Compression, Thin- Walled Structures 15, 271-290, 1993.
  11. Kim Y.S. and Hoa S.V., Bi-axial buckling behavior of composite rectangular plates, Composite Structures 31, 247-252, 1995.
  12. Nair, S., Singh, G.L. and G. Rao, V., Stability of Laminated Composite Plates Subjected To Various Types of In-Plane Loadings, Int. J. Mech. Sci., Vol. 38. No. 2, pp. 191-202, 1996. Sundaresan,P., Singh, G. and Rao,G.V., Buckling and post-buckling analysis of moderately thick laminated rectangular plates, Computers & Structures Vol. 61, No. I, pp.79-86, 1996. Walker,M., Adali, S. and Verijenko,V., Optimization of symmetric laminates for maximum buckling load including the effects of bending-twisting coupling, Computers&Structures, Vol.58, No.2, pp.313-319, 1996a.
  13. Walker, M., Adali, S. and Verijenko, V. E., Optimal design of symmetric angle-ply laminates subject to nonuniform buckling loads and in-plane restraints, Thin-Walled Structures Vol.26, No. I, pp. 45 60, 1996b. Adali,S., Richter,A. and Verijenko, K.E., Optimization of shear-deformable laminated plates under buckling and strength criteria, Composite Structures Vol. 39, No.3-4, pp. 167-178, 1997.
  14. Durban, D. and Zuckerman, Z., Elastoplastic buckling of rectangular plates in biaxial compression/tension, International Journal of Mechanical Sciences 41, 751—765, 1999.
  15. Sarma, M.