Dergiler / Teknik Dergi / 2022 / Cilt: 33 - Sayı: 1

Lightweight Cement-Based Composites Incorporating Hollow Glass Microspheres: Fresh and Hardened State Properties

Sayfa
11543–11567
Yayın Tarihi
2022-01-01
DOI
—
🏛️Bu makalenin bibliyografik verileri ve tam metin bağlantısı DergiPark üzerinden sağlanmıştır.
DergiPark Kaydı ↗
✨

Yapay Zeka Hızlı Bakış & Çıkarımlar

AI Insight
⚡ TL;DR(1 Cümlede Hızlı Çıkarım)

It was concluded that HGMs can be used in the lightweight cementitious mortar production which have great potential in building applications to reduce the heating energy consumption.

📌 3 Maddede Bu Makale

🎯
Amaç & Hipotez:This research aims to develop a lightweight cementitious composite with satisfied mechanical and good thermal insulating properties.
📊
Temel Bulgular & Veri:Two different types of hollow glass microspheres were used as lightweight aggregates and were substituted with fine aggregate by 10, 20 and 40% by volume.
💡
Sonuç & Katkı:It was concluded that HGMs can be used in the lightweight cementitious mortar production which have great potential in building applications to reduce the heating energy consumption.
🔬Tür:Araştırma Makalesi
📍Kapsam:Genişletilmiş Akademik Örneklem
⚙️Değişkenler:Hollow glass microspheres · rheology · mechanical properties

Özet

This research aims to develop a lightweight cementitious composite with satisfied mechanical and good thermal insulating properties. Two different types of hollow glass microspheres were used as lightweight aggregates and were substituted with fine aggregate by 10, 20 and 40% by volume. The rheological, physical, mechanical and microstructural properties of the resulting HGM-incorporated composites are investigated. The results showed that physical and mechanical properties of individual HGM particles plays a dominant role on the properties of lightweight cement mortars. HGM addition provided reductions up to 20% in the density and 45% in the thermal conductivity values of mortars compared to the reference. The optimum HGM ratio is suggested as 20%, which provides benefits such as reduced density and improved thermal insulation capability without causing significant reduction in compressive strength. It was concluded that HGMs can be used in the lightweight cementitious mortar production which have great potential in building applications to reduce the heating energy consumption.

Abstract

This research aims to develop a lightweight cementitious composite with satisfied mechanical and good thermal insulating properties. Two different types of hollow glass microspheres were used as lightweight aggregates and were substituted with fine aggregate by 10, 20 and 40% by volume. The rheological, physical, mechanical and microstructural properties of the resulting HGM-incorporated composites are investigated. The results showed that physical and mechanical properties of individual HGM particles plays a dominant role on the properties of lightweight cement mortars. HGM addition provided reductions up to 20% in the density and 45% in the thermal conductivity values of mortars compared to the reference. The optimum HGM ratio is suggested as 20%, which provides benefits such as reduced density and improved thermal insulation capability without causing significant reduction in compressive strength. It was concluded that HGMs can be used in the lightweight cementitious mortar production which have great potential in building applications to reduce the heating energy consumption.

🔖

Bu Makaleye Atıf Yap

KABAY, N., KIZILKANAT, A. B., AKTURK, B., KAHRAMAN, Y. (2022). Lightweight Cement-Based Composites Incorporating Hollow Glass Microspheres: Fresh and Hardened State Properties. Teknik Dergi, Cilt: 33 - Sayı: 1, 11543–11567. https://ajindex.com/articles/386396

📄 Tam Metin PDF Okuyucu

📄

PDF görüntüleyici hazırlanıyor...

Kaynakça (9)

  1. Yasar, E., Atis, C.D., Kilic, A., Gulsen, H. Strength properties of lightweight concrete made with basaltic pumice and fly ash. Mater. Lett. 57, 2267–2270, 2003. https://doi.org/10.1016/S0167-577X(03)00146-0
  2. Brooks, A.L., Zhou, H., Hanna, D., Comparative study of the mechanical and thermal properties of lightweight cementitious composites. Constr. Build. Mater., 159, 316–328, 2018 https://doi.org/10.1016/j.conbuildmat.2017.10.102
  3. Kabay, N., Aköz, F., Effect of prewetting methods on some fresh and hardened properties of concrete with pumice aggregate. Cem. Concr. Compos., 34, 503–507, 2012. https://doi.org/10.1016/j.cemconcomp.2011.11.022
  4. Kramar, D., Bindiganavile, V., Mechanical properties and size effects in lightweight mortars containing expanded perlite aggregate. Mater. Struct. Constr., 44, 735–748, 2011. https://doi.org/10.1617/s11527-010-9662-0 Lanzón, M., García-Ruiz, P.A., Lightweight cement mortars: Advantages and inconveniences of expanded perlite and its influence on fresh and hardened state and durability. Constr. Build. Mater., 22, 1798–1806, 2008. https://doi.org/10.1016/j.conbuildmat.2007.05.006
  5. Lu, Z., Xu, B., Zhang, J., Zhu, Y., Sun, G., Li, Z., Preparation and characterization of expanded perlite/paraffin composite as form-stable phase change material. Sol. Energy., 108, 460–466, 2014. https://doi.org/10.1016/j.solener.2014.08.008 de Gennaro, R., Langella, A., D’Amore, M., Dondi, M., Colella, A., Cappelletti, P., de’ Gennaro, M., Use of zeolite-rich rocks and waste materials for the production of structural lightweight concretes. Appl Clay. Sci. 41, 61–72, 2008. https://doi.org/10.1016/j.clay.2007.09.008
  6. Ke, Y., Beaucour, A.L., Ortola, S., Dumontet, H., Cabrillac, R., Influence of volume fraction and characteristics of lightweight aggregates on the mechanical properties of concrete. Constr. Build. Mater., 23, 2821-2828, 2009. https://doi.org/10.1016/j.conbuildmat.2009.02.038
  7. Lotfy, A., Hossain, K.M.A., Lachemi, M., Lightweight self-consolidating concrete with expanded shale aggregates: modelling and optimization. Int. J. Concr. Struct. Mater., 9, 185–206, 2015. https://doi.org/10.1007/s40069-015-0096-5
  8. Chandra, S., Berntsson, L., Lightweight aggregate concrete: science, technology, and applications, Elsevier, New York, USA, 2002.
  9. Aglan, H., Shebl, S., Morsy, M., Calhoun, M., Harding, H., Ahmad, M., Strength and toughness improvement of cement binders using expandable thermoplastic microspheres. Constr. Build. Mater., 23, 2856–2861, 2009.