KaydedilenlerDerginizi ekleyin

Dergiler / Celal Bayar Üniversitesi Fen Bilimleri Dergisi / 2021 / Cilt: 17 - Sayı: 3

Design and Manufacturing of The Prototype System for Recycling Waste Generated in 3 Dimensional Production to Filaments by Fused Deposition Modeling Method

İlker ERTUNA
Uğur Can TOPÇU
Çağrı YALÇINKAYA
Defne AÇIKGÖZ
Ezgi CIRIK
Ceren GÖDE
Sayfa
261–266
Yayın Tarihi
2021-09-27
DOI
—
🏛️Bu makalenin bibliyografik verileri ve tam metin bağlantısı DergiPark üzerinden sağlanmıştır.
DergiPark Kaydı ↗
✨

Yapay Zeka Hızlı Bakış & Çıkarımlar

AI Insight
⚡ TL;DR(1 Cümlede Hızlı Çıkarım)

With a structure consisting of crushers, extrusion, water and air cooling units, pulling, rotary, wrapper and automatic control units, a system including mechanical, electronic and software processes was designed, and filaments of desired dimensions were obtained within the scope of the study.

📌 3 Maddede Bu Makale

🎯
Amaç & Hipotez:Nowadays, three-dimensional printers have come to an important place in many sectors with the development of technology.
📊
Temel Bulgular & Veri:Printers that provide layered manufacturing have different raw materials requirements to be able to work the substance called filament is one of the raw materials of three-dimensional printers.
💡
Sonuç & Katkı:With a structure consisting of crushers, extrusion, water and air cooling units, pulling, rotary, wrapper and automatic control units, a system including mechanical, electronic and software processes was designed, and filaments of desired dimensions were obtained within the scope of the study.
🔬Tür:Araştırma Makalesi
📍Kapsam:Genişletilmiş Akademik Örneklem
⚙️Değişkenler:Filament · waste recycling · layered manufacturing

Abstract

Nowadays, three-dimensional printers have come to an important place in many sectors with the development of technology. Printers that provide layered manufacturing have different raw materials requirements to be able to work the substance called filament is one of the raw materials of three-dimensional printers. The most preferred raw material for a three-dimensional printer is filament compared to other raw materials. The layered manufacturing device may take wrong printing or undesired printing for any reason. It is important to be able to recycle the product resulting from these printings. The aim of this work is to make the filament re-usable for layered manufacturing. With a structure consisting of crushers, extrusion, water and air cooling units, pulling, rotary, wrapper and automatic control units, a system including mechanical, electronic and software processes was designed, and filaments of desired dimensions were obtained within the scope of the study.

🔖

Bu Makaleye Atıf Yap

ERTUNA, İ., TOPÇU, U. C., YALÇINKAYA, Ç., AÇIKGÖZ, D., CIRIK, E., GÖDE, C. (2021). Design and Manufacturing of The Prototype System for Recycling Waste Generated in 3 Dimensional Production to Filaments by Fused Deposition Modeling Method. Celal Bayar Üniversitesi Fen Bilimleri Dergisi, Cilt: 17 - Sayı: 3, 261–266. https://ajindex.com/articles/384009

📄 Tam Metin PDF Okuyucu

📄

PDF görüntüleyici hazırlanıyor...

Kaynakça (13)

  1. Çelik, İ., Karakoç, F., Çakır, M. C., Duysak, A. 2013. Hızlı Prototipleme Teknolojileri ve Uygulama Alanları. Dumlupınar Üniversitesi Fen Bilimleri Enstitüsü Dergisi, 31, 53-69
  2. Mirón, V., Ferrándiz, S., Juárez, D., and Mengual, A. 2017. Manufacturing and characterization of 3D printer filament using tailoring materials. Procedia Manufacturing, 13, 888-894
  3. Sa’ude, N., Kamarudin, K., Ibrahim, M., Ibrahim, M.H.I., 2015. Melt flow index of recycle ABS for fused deposition modeling (FDM) filament. Appl. Mech. Mater. 773-774, 3-7
  4. Oussai, A., Barftai, Z., Katai, L., and Szalkai, I., 2019. Development of a Small Scale Plastic Recycling Technology and a Special Filament Product for 3D Printing. International Journal of Engineering and Management Science, 4.1: 365-371
  5. Dudek, P., 2013. FDM 3D printing technology in manufacturing composite elements, Arch. Metall. Mater. 58 (4), 1415-1418
  6. Angatkina, K. 2018. Recycling of HDPE from MSW waste to 3D printing filaments. Degree Thesis Materials Processing Technology
  7. Romero-Alva V, Alvarado-Diaz W, Roman-Gonzalez A 2018. Design of a 3D printer and integrated supply system. IEEE XXV International conference on electronics, electrical enginlerine and computing
  8. Mohammed, M.I.; Das, A.; Gomez-Kervin, E.; Wilson, D.; Gibson, I. 2017. EcoPrinting: Investigating the use of 100% recycled Acrylonitrile Butadiene Styrene (ABS) for Additive Manufacturing. Solid Freeform Fabrication. In Proceedings of the 28th Annual International Solid Freeform Fabrication Symposium
  9. Öz, Ö, Aydın, M, Kara, A, Sancak, M. 2018. Üç Boyutlu Yazıcılarda Kullanılan Doluluk Oranının Hasar Yüküne Olan Etkisinin Belirlenmesi. International Journal of 3D Printing Technologies and Digital Industry, 2 (1), 32-39
  10. Yeşil, Ö., Mazanoğlu, K. 2018. Effects Of Filling Ratio, Orientation And Print Temperature On Bending Properties Of 3d Printed Pla Beams. Usak University Journal of Engineering Sciences. 1(2): 66-75
  11. Corcione CE, Palumbo E, Masciullo A, Montagna F, Torricelli MC. 2018. Fused Deposition Modeling (FDM): an innovative technique aimed at reusing Lecce stone waste for industrial design and building applications. Constr Build Mater 158:276–284
  12. Mohammed MI, Wilson D, Gomez-Kervin E, Rosson L, Long J. 2019. EcoPrinting: Investigation of Solar Powered Plastic Recycling and Additive Manufacturing for Enhanced Waste Management and Sustainable Manufacturing. IEEE Conf. Technol. Sustain. SusTech
  13. Mohammed, M. I.; Mo