Dergiler / Turkish Journal of Physics / 2002 / Cilt: 26 - Sayı: 6

Microstructure and Critical Current of Hot-Pressed YBCO Ceramics

Sayfa
435–439
DOI
—
🏛️Bu makalenin bibliyografik verileri ve tam metin bağlantısı DergiPark üzerinden sağlanmıştır.
DergiPark Kaydı ↗
✨

Yapay Zeka Hızlı Bakış & Çıkarımlar

AI Insight
⚡ TL;DR(1 Cümlede Hızlı Çıkarım)

These results and AC susceptibility measurements reveal that the weak links or pinning forces were improved by increasing HPing pressure.

📌 3 Maddede Bu Makale

🎯
Amaç & Hipotez:The effect of hot-pressing (HPing) on the densification and the superconducting properties of YBCO were investigated.
📊
Temel Bulgular & Veri:Relative density up to 93% and critical current density of 509 A/cm2 at 77 K were achieved through uniaxial HPing at 800°C under 325 kg/cm2 pressure for 4 hours.
💡
Sonuç & Katkı:These results and AC susceptibility measurements reveal that the weak links or pinning forces were improved by increasing HPing pressure.
🔬Tür:Araştırma Makalesi
📍Kapsam:Genişletilmiş Akademik Örneklem
⚙️Değişkenler:A. High temperature superconductors · B. Hot pressing · C. YBCO

Özet

The effect of hot-pressing (HPing) on the densification and the superconducting properties of YBCO were investigated. The phases and microstructure were analysed by XRD and SEM and transport properties were studied by I-V and AC susceptibility measurements. Relative density up to 93% and critical current density of 509 A/cm2 at 77 K were achieved through uniaxial HPing at 800°C under 325 kg/cm2 pressure for 4 hours. HPing raised the Jc from 80 A/cm2 to 509 A/cm2. These results and AC susceptibility measurements reveal that the weak links or pinning forces were improved by increasing HPing pressure.

Abstract

The effect of hot-pressing (HPing) on the densification and the superconducting properties of YBCO were investigated. The phases and microstructure were analysed by XRD and SEM and transport properties were studied by I-V and AC susceptibility measurements. Relative density up to 93% and critical current density of 509 A/cm2 at 77 K were achieved through uniaxial HPing at 800°C under 325 kg/cm2 pressure for 4 hours. HPing raised the Jc from 80 A/cm2 to 509 A/cm2. These results and AC susceptibility measurements reveal that the weak links or pinning forces were improved by increasing HPing pressure.

🔖

Bu Makaleye Atıf Yap

ÖZCAN, Ş., FIRAT, T., ÖZDAŞ, E. (2002). Microstructure and Critical Current of Hot-Pressed YBCO Ceramics. Turkish Journal of Physics, Cilt: 26 - Sayı: 6, 435–439. https://ajindex.com/articles/378467

📄 Tam Metin PDF Okuyucu

📄

PDF görüntüleyici hazırlanıyor...