Dergiler / Uludağ Üniversitesi Mühendislik Fakültesi Dergisi / 2018 / Cilt: 23 - Sayı: 1

AKIŞ KAYNAKLI TİTREŞİMDE İKİ ARDIŞIK SİLİNDİRDEN ELDE EDİLEN GÜCÜN PARAMETRİK OLARAK İNCELENMESİ

Parametric Investigation of Harnessed Power of Two Tandem Cylinders in Flow Induced Vibration

Sayfa
329–344
DOI
—
🏛️Bu makalenin bibliyografik verileri ve tam metin bağlantısı DergiPark üzerinden sağlanmıştır.
DergiPark Kaydı ↗
✨

Yapay Zeka Hızlı Bakış & Çıkarımlar

AI Insight
⚡ TL;DR(1 Cümlede Hızlı Çıkarım)

Türbülanslı serbest su yüzeyli kanalda yapılan deneylerde arkalı önlü bulunan ardışık silindirlerin hareketi 30,000<Re <120,000 aralığında farklı parametreler için incelenmiş ve özellikle hızlı artış bölgesindeki 0.9<U<1.3 m/s akış hızı aralığında elde edilen güçte lokal artış ve düşüşler tespit edilmiştir.

📌 3 Maddede Bu Makale

🎯
Amaç & Hipotez:Enine akışlarda silindirler özellikle çevri kaynaklı titreşim ve hızlı artış (galloping) adı verilen bölgeden oluşan akış kaynaklı titreşim sergilerler.
📊
Temel Bulgular & Veri:Hızlı artış bölgesinde, osilatörlerde mekanik enerjiye çevrilen hidrokinetik enerji akışın hızı ve Re sayısıyla artar.
💡
Sonuç & Katkı:Türbülanslı serbest su yüzeyli kanalda yapılan deneylerde arkalı önlü bulunan ardışık silindirlerin hareketi 30,000<Re <120,000 aralığında farklı parametreler için incelenmiş ve özellikle hızlı artış bölgesindeki 0.9<U<1.3 m/s akış hızı aralığında elde edilen güçte lokal artış ve düşüşler tespit edilmiştir.
🔬Tür:Araştırma Makalesi
📍Kapsam:Genişletilmiş Akademik Örneklem
⚙️Değişkenler:Çevri kaynaklı titreşim · hızlı artış dengesizliği · güç

Özet

Enine akışlarda silindirler özellikle çevri kaynaklı titreşim ve hızlı artış (galloping) adı verilen bölgeden oluşan akış kaynaklı titreşim sergilerler. Hızlı artış bölgesinde, osilatörlerde mekanik enerjiye çevrilen hidrokinetik enerji akışın hızı ve Re sayısıyla artar. Türbülanslı serbest su yüzeyli kanalda yapılan deneylerde arkalı önlü bulunan ardışık silindirlerin hareketi 30,000<Re <120,000 aralığında farklı parametreler için incelenmiş ve özellikle hızlı artış bölgesindeki 0.9<U<1.3 m/s akış hızı aralığında elde edilen güçte lokal artış ve düşüşler tespit edilmiştir. Bu çalışmanın amacı bu artış/azalışların sebeplerini açıklamaktır. Bunun için tüm deneyler incelenerek bu ani değişim olan parametreler (Kütle oranı, yay sabiti, hız oranı vb. gibi) belirlenerek bir matris oluşturulmuştur. Hem öndeki silindir hem de arkasındaki silindir için elde edilen güç, genlik oranı, frekans oranları ve zamana bağlı hareket grafikleri oluşturulmuştur. Yüksek çözünürlüklü kamera ile görüntüleme tekniği kullanılmış ve elde edilen sonuçlar tartışılmıştır. Bu değişimlerin ana sebebinin iki silindir arasındaki etkileşim olduğu tespit edilmiştir. Bu değişimlerde hızlı artış dengesizliği kaybolmakta ve elde edilen güçte ve genlikte ani düşüşler oluşmaktadır.

Abstract

In transverse flow, cylinders respond in FIV (Flow Induced Vibrations); particularly VIV (Vortex Induced Vibrations) and galloping. Typically, in the galloping region, the hydrokinetic power converted to mechanical in the oscillators increases with increasing flow velocity and Reynolds number. Flow Induced Vibrations (FIVs) of two tandem, rigid and circular cylinder with end-springs are studied for 30,000<Re <120,000 with different damping, mass ratio and stiffness as parameters in the Low Turbulence Free Surface Water (LTFSW) Channel of the Marine Renewable Energy Laboratory (MRELab). Typical local drops and jumps in harnessed power were observed in the velocity range of 0.9<U<1.3 m/s within the galloping region. The main objective of this paper is to explain the reason for the presence of these drops and jumps. To achieve this objective, the points of changing in harnessed power in an extensive set of data with spacing, damping, stiffness, and flow velocity as parameters are identified. For both up and downstream cylinders, the harnessed power, amplitude-ratio, frequency-ratio and time history graphs are obtained to define the reason of these drop/jumps. Visualization with high-resolution camera has been used and the assumption which may affect the phenomena were studied and presented. As a conclusion, there is a big interaction between cylinders. Galloping instability disappears at this drops and harnessed power decreases sharply and amplitude as well.

🔖

Bu Makaleye Atıf Yap

DOBRUCALI, E. (2018). AKIŞ KAYNAKLI TİTREŞİMDE İKİ ARDIŞIK SİLİNDİRDEN ELDE EDİLEN GÜCÜN PARAMETRİK OLARAK İNCELENMESİ. Uludağ Üniversitesi Mühendislik Fakültesi Dergisi, Cilt: 23 - Sayı: 1, 329–344. https://ajindex.com/articles/329894

📄 Tam Metin PDF Okuyucu

📄

PDF görüntüleyici hazırlanıyor...

Kaynakça (3)

  1. Bernitsas, M. M., and Raghavan, K., (2007), “Reduction/Suppression of Vortex Induced Forces and Motion through Surface Roughness Control,” U.S. Provisional Patent Application No. S2009/0114002 A1 (UofM#3757). Bernitsas, M. M., Raghavan K., Ben-Simon Y., Garcia E.M.H., (2008), “VIVACE (Vortex Induced Vibration Aquatic Clen Energy): A New Concept in Generation of Clean and Renewable Energy from Fluid Flow” ASME Paper No. OMAE2008-041101-1. DOI: 10.1115/1.2957913 Bernitsas, M. M., and Raghavan, K., (2009), “Fluid Motion Energy Converter,” United States Patent and Trademark Office, Patent No. 7,493,759 B2. Bernitsas, M. M., and Raghavan, K., (2011), “Enhancement of Vortex Induced Forces and Motion Through Surface Roughness Control,” U.S. Patent Trademark Office, Patent No. 8,042,232 B2. Bernitsas, M. M., and Raghavan, K., (2014), “Reduction of Vortex Induced Forces & Motion Through Surface Roughness Control,” U.S. Patent and Trademark Office, Patent No. 8,684,040 B2. Bernitsas, M. M., (2016a), Harvesting Energy by Flow Included Motions (Chapter 47), Handbook Ocean Engineering, Springer. Bernitsas, M. M., (2016b), Synergistic Flow-Induced Motion of Two Cylinders Harvesting Marine Hydrokinetic Energy, METS 2016. Blevins R.D.: Flow-Induced Vibration (Krieger, Florida 1990).
  2. Bokaian, A., and Geoola, F., (1984), Wake-Induced Galloping of Two Interfering Circular Cylinders, Journal of Fluid Mechanics, Vol.146, p.383–415. DOI:10.1017/S0022112084001920 Bokaian A., (1989), Galloping of a circular cylinder in the wake of another, J. Sound Vib. 128, 71–85. DOI:10.1016/0022-460X(89)90681-0
  3. Chang C.C. (2010), Passive turbulence control for VIV enhancement for hydrokinetic energy harnessing using vortex Induced vibrations, Ph.D. thesis. Ann Arbor, MI: The University of Michigan. Chang, C. C., and Bernitsas, M. M., (2011), “Hydrokinetic Energy Harnessing Using the VIVACE Converter With Passive Turbulence Control,” ASME Paper No. OMAE2011-50290. DOI:10.1115/OMAE2011-50290 Ding L, Bernitsas M.M., Kim E.S., (2013), 2-D URANS vs. experiments of flow induced motions of two circular cylinders in tandem with passive turbulence control for 30,000 Ding L, Zhang L, Kim E.S, Bernitsas M.M., (2015), URANS vs. experiments of flow induced motions of multiple circular cylinders with passive turbulence control. J Fluid Struct;54:612–628. DOI:10.1016/j.jfluidstructs.2015.01.003 Ishigai S., Nishikawa E., Nishimura E. and Cho K., (1972), Experimental study of structure of gas flow in tube bank