This technique permit to observe highlighting the imperfections in the crystal pattern.
📌 3 Maddede Bu Makale
🎯
Amaç & Hipotez:Melt -spinning and melt extraction methods of rapid solidification have been applied on Al-Ni alloys in the lower and higher composition.
📊
Temel Bulgular & Veri:The cooling speed calculated on the basis of the thermic transfer coefficient in accordance with the thickness of the fibers has lead to values of the cooling speed of the one million C/sec for fibres of 100 micrometers.Alloys with 1,86 % Ni content in pouring status and ultra-rapid solidificated have been analysed from the point of crystalline structure.
💡
Sonuç & Katkı:This technique permit to observe highlighting the imperfections in the crystal pattern.
🔬Tür:Araştırma Makalesi
📍Kapsam:Genişletilmiş Akademik Örneklem
⚙️Değişkenler:Alan Parametreleri
Abstract
Melt -spinning and melt extraction methods of rapid solidification have been applied on Al-Ni alloys in the lower and higher composition. For orientate appreciations of the peripheric speed of the cooling disk it is used the dependence between the thickness of the solidified fibers and the peripheric speed of the extraction disk. The cooling speed calculated on the basis of the thermic transfer coefficient in accordance with the thickness of the fibers has lead to values of the cooling speed of the one million C/sec for fibres of 100 micrometers.Alloys with 1,86 % Ni content in pouring status and ultra-rapid solidificated have been analysed from the point of crystalline structure. The paper it's a short analysis of the use of the X-ray diffraction techniques for observing the effects of ultra-rapid solidification in Al-Ni alloys. This technique permit to observe highlighting the imperfections in the crystal pattern.
🔖
Bu Makaleye Atıf Yap
CRISTEA, L., OTLACAN, E., CRISTEA, E. (2007). The study of the crystalline structure of the phases in the Al-Ni alloys ultrarapid solidification by the method of x ray diffraction. Selçuk Üniversitesi Mühendislik-Mimarlık Fakültesi Dergisi, Cilt: 22 - Sayı: 1, 45–48. https://ajindex.com/articles/318027
Kaynakça (4)
M. Hansen, K. Anderko, "Constitution of Binary Alloys", Mc Graw-Hill Book Comp., New York, 1958
H. L. Luo, C. C. Chao, P. Duwez, Trans. Met. Soc. AIME, 230 (1964), p. 1488 N. Petrescu s.a., Materials Science Forum, Zurich, vol. 225-227,1996, p. 317 Lidia Cristea, N. Petrescu, Enona Cristea, Experimental researches on the extension of Ni solubility in Al by melt quenching, EUROMAT 2001,
Rimini, Italy, 2001, p.307 Lidia Cristea, Enona Cristea, Thre ultrarapid solidification applied to the system Al-Ni, EUROMAT 2003,