KaydedilenlerDerginizi ekleyin

Dergiler / Süleyman Demirel Üniversitesi Fen Bilimleri Enstitüsü Dergisi / 2017 / Cilt: 21 - Sayı: 1

Manufacturing and Characterization of Roof Tiles a Mixture of Tile Waste and Coal Fly Ash

AYSEL KANTÜRK FİGEN
Ünal ÖZÇAY
Sabriye PİŞKİN
Sayfa
224–229
DOI
—
🏛️Bu makalenin bibliyografik verileri ve tam metin bağlantısı DergiPark üzerinden sağlanmıştır.
DergiPark Kaydı ↗
✨

Yapay Zeka Hızlı Bakış & Çıkarımlar

AI Insight
⚡ TL;DR(1 Cümlede Hızlı Çıkarım)

In addition to this, maximum 5 % Tunçbilek fly ash samples in the composition of roof tiles provided favorable physical and mechanical characteristics of the commercial product.

📌 3 Maddede Bu Makale

🎯
Amaç & Hipotez:The study presented in this manuscript focuses on the manufacturing of roof tiles bearing a mixture of tile waste and coal fly ash.
📊
Temel Bulgular & Veri:Seyitömer fly ash was not suitable for use as secondary raw material due to the presence of tile waste with higher SO3 and CaO contents and lower MgO content.
💡
Sonuç & Katkı:In addition to this, maximum 5 % Tunçbilek fly ash samples in the composition of roof tiles provided favorable physical and mechanical characteristics of the commercial product.
🔬Tür:Araştırma Makalesi
📍Kapsam:Genişletilmiş Akademik Örneklem
⚙️Değişkenler:Roof tiles · Waste · Coal

Özet

The study presented in this manuscript focuses on the manufacturing of roof tiles bearing a mixture of tile waste and coal fly ash. A roof tile sample at a different composition was prepared to attain consistence in quality. The conversion factors were described to be able to convert the laboratory results for firing strength and water absorption into the industrial operating conditions. It was determined that the replacement mixture of the tile waste as well as the Tunçbilek fly ash together with the Muttalip clay as the raw material allowed the manufacturing of good quality roof tiles. Seyitömer fly ash was not suitable for use as secondary raw material due to the presence of tile waste with higher SO3 and CaO contents and lower MgO content. In addition to this, maximum 5 % Tunçbilek fly ash samples in the composition of roof tiles provided favorable physical and mechanical characteristics of the commercial product.

🔖

Bu Makaleye Atıf Yap

FİGEN, A. K., ÖZÇAY, Ü., PİŞKİN, S. (2017). Manufacturing and Characterization of Roof Tiles a Mixture of Tile Waste and Coal Fly Ash. Süleyman Demirel Üniversitesi Fen Bilimleri Enstitüsü Dergisi, Cilt: 21 - Sayı: 1, 224–229. https://ajindex.com/articles/310525

📄 Tam Metin PDF Okuyucu

📄

PDF görüntüleyici hazırlanıyor...

Kaynakça (15)

  1. DPT, 2000. Sekizinci Beş Yılık Kalkınma Planı, Taş ve Toprağa Dayalı Ürünler Sanayi Özel İhtisas Komisyonu Raporu, Ankara. Türkiye
  2. Özcay,U., 2010. Recyling of Tile Waste from Tile Sectors, Master Thesis, Yıldız Technical University, Department of Chemical Engineering, İstanbul, Turkey
  3. Cheng T.W., Chen Y.S., 2004. Characterisation of Glass Ceramics Made From Incinerator Fly Ash. Ceramic International, 30: 343–349
  4. Derun E.M., Tugrul N., Lkhagva T., Piskin S., 2010. Pelletisation of Fly Ashes as a Lightweight Aggregate. Advances in Cement Research, 22. (2): 99-105
  5. Erol M., Küçükbayrak S., Ersoy-Meriçboyu A., 2008. Comparison of the Properties of Glass, Glass–Ceramic and Ceramic Materials Produced From Coal Fly Ash. Journal of Hazardous Materials, 153: 418–425
  6. Fernández-Pereira C., Casa J.A., Gómez-Barea A., Arroyo F., Leiva C., Luna Y., 2011. Application of Biomass Gasification Fly Ash for Brick Manufacturing. Fuel, 90: 220–232
  7. Ghoraba H. Y., Anterb A., Miniawyc El H., 2007. Building with Local Materials: Stabilized Soil and Industrial Wastes. Materials and Manufacturing Processes, 22: 157–162
  8. Haiying Z., Youcai Z., Jingyu Q., 2011. Utilization of Municipal Solid Waste Incineration (MSWI) Fly Ash In Ceramic Brick: Product Characterization And Environmental Toxicity. Waste Management, 31: 331–341
  9. Joseph G., Ramamurthy, K., 2009. Influence Of Fly Ash on Strength and Sorption Characteristics of Cold-Bonded Fly Ash Aggregate Concrete. Construction and Building Materials, 23: 1862–1870
  10. Nochaiya, T., Wongkeo, W. Chaipanich, A., 2010. Utilization of fly ash with silica fume and properties of Portland cement–fly ash–silica fume concrete. Fuel, 89: 768–774
  11. Peng F., Liang K., Hu A., 2005. Nano-Crystal Glass–Ceramics Obtained From High Alumina Coal Fly Ash. Fuel. 84:341–346
  12. Saia N. V., Komaraiahb M., Sita Rama Rajuc A. V., 2008. Preparation and Properties of Sintered Copper-Tin Composites Containing Copper Coated or Uncoated Fly Ash. Materials and Manufacturing Processes, 23: 651–657
  13. Demir I., Orhan M., 2003. Reuse of Waste Bricks in the Production Line. Building and Environment, 38: 1451 – 1455
  14. Romualdo R. Menezes, Heber S. Ferreira, Gelmires A. Neves, Helio de L. Lira, Heber C. Ferreira., 2005. Use of Granite Sawing Wastes in the Production of Ceramic Bricks and Tiles. Journal of the European Ceramic Society, 25: 1149–1158
  15. Olgun A., Erdogan, Y., Ayhan, Y., Zeybek B., 2005. Development o