KaydedilenlerDerginizi ekleyin

Dergiler / Niğde Ömer Halisdemir Üniversitesi Mühendislik Bilimleri Dergisi / 2018 / Cilt: 7 - Sayı: 1

NUMERICAL FIRST MODE FREQUENCY ANALYSIS OF AXIALLY LAYERED FUNCTIONALLY GRADED TAPERED BEAMS

EKSENEL TABAKALI FONKSİYONEL DERECELENDİRİLMİŞ KONİK KİRİŞLERİN SAYISAL İLK MOD FREKANS ANALİZİ

SAVAŞ EVRAN
Sayfa
399–406
DOI
—
🏛️Bu makalenin bibliyografik verileri ve tam metin bağlantısı DergiPark üzerinden sağlanmıştır.
DergiPark Kaydı ↗
✨

Yapay Zeka Hızlı Bakış & Çıkarımlar

AI Insight
⚡ TL;DR(1 Cümlede Hızlı Çıkarım)

In addition, the most effective layers are Layer 1 with 82.17%, Layer 2 with 16.36% and Layer 3 with 1.45% respectively.

📌 3 Maddede Bu Makale

🎯
Amaç & Hipotez:The purpose of this numerical work is to evaluate the first mode frequency analysis of the tapered beams with three layers, modelled using functionally graded materials (FGM) in the axially direction, under clamped-clamped (C-C) boundary condition based on finite element software named ANSYS V13.
📊
Temel Bulgular & Veri:Analyses were conducted using L16 Taguchi orthogonal array design consisting of three control factors and four levels.
💡
Sonuç & Katkı:In addition, the most effective layers are Layer 1 with 82.17%, Layer 2 with 16.36% and Layer 3 with 1.45% respectively.
🔬Tür:Modelleme & Sayısal Simülasyon
📍Kapsam:Genişletilmiş Akademik Örneklem
⚙️Değişkenler:Functionally graded materials · tapered layered beam · finite element method

Özet

The purpose of this numerical work is to evaluate the first mode frequency analysis of the tapered beams with three layers, modelled using functionally graded materials (FGM) in the axially direction, under clamped-clamped (C-C) boundary condition based on finite element software named ANSYS V13. Analyses were conducted using L16 Taguchi orthogonal array design consisting of three control factors and four levels. The layers were determined as the control factors and were considered to be made from aluminum (Al)/monotungsten carbide (WC) systems. The optimum layer combination was carried out according to the analysis of signal-to-noise (S/N) ratio. The importance levels and contribution ratios of the layers on the first mode frequency of the axially layered FG tapered beams were observed by using analysis of variance (ANOVA). Layer 1 and Layer 3 have positive effects on the first mode frequency values. However, Layer 2 has negative influence. In addition, the most effective layers are Layer 1 with 82.17%, Layer 2 with 16.36% and Layer 3 with 1.45% respectively.

Abstract

Bu numerik çalışmanın amacı, ANSYS V13 sonlu elemanlar programı kullanarak ankastre-ankastre (C-C) sınır şartı altında eksenel yönde fonksiyonel derecelendirilmiş malzemeden (FDM) modellenmiş üç tabakalı konik kirişlerin birinci mod frekans analizini değerlendirmektir. Analizler üç seviye ve üç kontrol faktöründen oluşan L16 Taguchi ortogonal dizi tasarımı kullanılarak yürütülmüştür. Tabakalar kontrol faktörleri olarak karar verilmiştir ve alüminyum (Al) / monotungsten karbür (WC) sistemlerinden oluştuğu düşünülmektedir. Optimum tabaka kombinasyonu sinyal gürültü oran analizine göre gerçekleştirildi. Eksenel tabakalı FD konik kirişlerin birinci mod frekansı üzerinde tabakaların önem seviyeleri ve katkı oranları varyans analizi (ANOVA) kullanılarak incelenmiştir. Birinci mod frekans değerleri üzerinde Tabaka 1 ve Tabaka 3 pozitif etkilere sahiptir. Ancak Tabaka 2 negatif etkiye sahiptir. Ayrıca en etkili tabakalar sırasıyla %82,17 ile Tabaka 1, %16,36 ile Tabaka 2 ve %1,45 ile Tabaka 3’tür.

🔖

Bu Makaleye Atıf Yap

EVRAN, S. (2018). NUMERICAL FIRST MODE FREQUENCY ANALYSIS OF AXIALLY LAYERED FUNCTIONALLY GRADED TAPERED BEAMS. Niğde Ömer Halisdemir Üniversitesi Mühendislik Bilimleri Dergisi, Cilt: 7 - Sayı: 1, 399–406. https://ajindex.com/articles/290367

📄 Tam Metin PDF Okuyucu

📄

PDF görüntüleyici hazırlanıyor...

Kaynakça (14)

  1. KOIZUMI, M., "FGM Activities in Japan". Composites Part B: Engineering, 28(1), 1-4, 1997
  2. SHEN, H.S., Functionally Graded Materials: Nonlinear Analysis of Plates and Shells, CRC Press, Boca Raton, London, New York, 2009
  3. ŞIMŞEK, M., "Fundamental Frequency Analysis of Functionally Graded Beams by using Different Higher-Order Beam Theories". Nuclear Engineering and Design, 240(4), 697-705, 2010
  4. WATARI, F., YOKOYAMA, A., SASO, F., UO, M., KAWASAKI, T., "Fabrication and Properties of Functionally Graded Dental Implant". Composites Part B: Engineering, 28(1), 5-11, 1997
  5. MÜLLER, E., DRAŠAR, Č., SCHILZ, J., KAYSSER, W.A., "Functionally Graded Materials for Sensor and Energy Applications". Materials Science and Engineering: A, 362(1), 17-39, 2003
  6. SCHULZ, U., PETERS, M., BACH, F.W., TEGEDER, G., "Graded Coatings for Thermal, Wear and Corrosion Barriers". Materials Science and Engineering: A, 362(1), 61-80, 2003
  7. AYDOGDU, M., TASKIN, V., "Free Vibration Analysis of Functionally Graded Beams with Simply Supported Edges". Materials & Design, 28(5), 1651-1656, 2007
  8. KAPURIA, S., BHATTACHARYYA, M., KUMAR, A.N., "Bending and Free Vibration Response of Layered Functionally Graded Beams: A theoretical model and its experimental validation". Composite Structures, 82(3), 390-402, 2008
  9. RAJASEKARAN, S., "Free Vibration of Centrifugally Stiffened Axially Functionally Graded Tapered Timoshenko Beams using Differential Transformation and Quadrature Methods". Applied Mathematical Modelling, 37(6), 4440-4463, 2013
  10. SHAHBA, A., RAJASEKARAN, S., "Free Vibration and Stability of Tapered Euler–Bernoulli Beams Made of Axially Functionally Graded Materials". Applied Mathematical Modelling, 36(7), 3094-3111, 2012
  11. SHAHBA, A., ATTARNEJAD, R., MARVI, M.T., HAJILAR, S., "Free Vibration and Stability Analysis of Axially Functionally Graded Tapered Timoshenko Beams with Classical and Non-Classical Boundary Conditions". Composites Part B-Engineering, 42(4), 801-808, 2011
  12. FANG, J.S., ZHOU, D., "Free Vibration Analysis of Rotating Axially Functionally Graded Tapered Timoshenko Beams". International Journal of Structural Stability and Dynamics, 16(5), 1-19, 2016
  13. AKGÖZ, B., CIVALEK, Ö., "Free Vibration Analysis of Axially Functionally Graded Tapered Bernoulli–Euler Microbeams based on The Modified Couple Stress Theory". Composite Structures, 98, 314-322, 2013
  14. HUANG, Y., LI, X.F., "A New Approach for Free Vibration of Axially Functi