Proposed technique has been demonstrated with an example.
📌 3 Maddede Bu Makale
🎯
Amaç & Hipotez:In current source inverter (CSI) fed induction motors (IM) operated under constant current, the input voltage changes within large limits as the load torque changes.
📊
Temel Bulgular & Veri:In such an operation the motor mostly operates on the saturated portion of its magnetizing characteristic, and non-linear relation exists between the input voltage and the load torque.
💡
Sonuç & Katkı:Proposed technique has been demonstrated with an example.
🔬Tür:Araştırma Makalesi
📍Kapsam:Genişletilmiş Akademik Örneklem
⚙️Değişkenler:Alan Parametreleri
Abstract
In current source inverter (CSI) fed induction motors (IM) operated under constant current, the input voltage changes within large limits as the load torque changes. In such an operation the motor mostly operates on the saturated portion of its magnetizing characteristic, and non-linear relation exists between the input voltage and the load torque. Therefore in this paper a numerical technique is presented for obtaining required input voltage corresponding to a given load torque, which can be used for estimating the firing angle of the input rectifier, which in turn can be used for predicting firing angle in terms of load torque. Proposed technique has been demonstrated with an example.
🔖
Bu Makaleye Atıf Yap
AKBABA, M. (2009). Motor input voltage and rectifier firing angle variation with load torque in constant current operated induction motors. Mathematical and Computational Applications, Cilt: 14 - Sayı: 1, 73–84. https://ajindex.com/articles/280077
P. Vas, Electric Machines and Drives, A space vector approach, Clerendon Press, Oxford, 1996
E.P. Cornel, and T.A. Lipo, Modeling and design of controlled current induction motor drive system, IEEE Trans. on Ind. Appl. IA-13, 321-331, 1977 3. G.K. Creighton, Current source inverter fed induction motor pulsations, Proc. IEE, Pt. B, 127, 231-239, 1986
S. Juvarayan, R. Belamkonda and V. Subrahmanyan, Analysis of a current controlled inverter-fed induction motor drive using digital simulation, IEEE Trans. on Industrial Electronics and Control Instrumentation, ECI, 27(2), 67-76, 1986. 5.H.G. Kim, S.K. Sul and M.H. Park, Optimal efficiency drive of a current source inverter fed induction motor by flux control, IEEE Trans. on Ind. Appl., IA-20, 1453-1459, 1984
H. Kim and M.T. Jahns, Current control for ac motor drives using a single DC link current sensor and measurement voltage vectors, IEEE Trans. on Ind. Appl., 42,1539-1547, 2006
S.C. Chapra and R.P. Canale, Numerical Methods for Engineers, fifth edition, McGraw Hill, NY, 2006
M. Akbaba, Lecture Notes on Electric Drives, University of Bahrain, 2002.