Dergiler / Mathematical and Computational Applications / 2007 / Cilt: 12 - Sayı: 1

The evaluation of thermal stresses in thermoplastic laminated composites with different square holes

Sayfa
59–68
DOI
—
🏛️Bu makalenin bibliyografik verileri ve tam metin bağlantısı DergiPark üzerinden sağlanmıştır.
DergiPark Kaydı ↗
✨

Yapay Zeka Hızlı Bakış & Çıkarımlar

AI Insight
⚡ TL;DR(1 Cümlede Hızlı Çıkarım)

The results were showed in figures depending on applied temperatures, orientations and dimensions of square hole.

📌 3 Maddede Bu Makale

🎯
Amaç & Hipotez:In this study, a thermal stress analysis was evaluated on symmetric angle-ply laminated thermoplastic composite plates that were having different square hole dimensions.
📊
Temel Bulgular & Veri:Besides, it was applied with various values that were chosen as 50, 60, 70, 80, 90, 100 °C, because of the fact that the effect of increasing uniform temperature on thermal stresses was examined.
💡
Sonuç & Katkı:The results were showed in figures depending on applied temperatures, orientations and dimensions of square hole.
🔬Tür:Araştırma Makalesi
📍Kapsam:Genişletilmiş Akademik Örneklem
⚙️Değişkenler:Alan Parametreleri

Abstract

In this study, a thermal stress analysis was evaluated on symmetric angle-ply laminated thermoplastic composite plates that were having different square hole dimensions. The temperature loading was selected uniformly. Besides, it was applied with various values that were chosen as 50, 60, 70, 80, 90, 100 °C, because of the fact that the effect of increasing uniform temperature on thermal stresses was examined. The width plate-to-the width square hole, a/b, ratios were changed as 2, and 4. Thermoplastic laminated composite plates were assumed to be simple supported. Laminated plates were composed of four orthotropic layers oriented with angle-ply in symmetric manner. The solution was carried out by using ANSYS finite element program. The results were showed in figures depending on applied temperatures, orientations and dimensions of square hole.

🔖

Bu Makaleye Atıf Yap

ŞEN, F., TOPARLI, M., KÖKSAL, N. S. (2007). The evaluation of thermal stresses in thermoplastic laminated composites with different square holes. Mathematical and Computational Applications, Cilt: 12 - Sayı: 1, 59–68. https://ajindex.com/articles/279990

📄 Tam Metin PDF Okuyucu

📄

PDF görüntüleyici hazırlanıyor...

Kaynakça (11)

  1. Y. M. Haddad, Advanced multilayered and fibre-reinforced composites, Kluwer Academic Publishers, Netherlands, 1998
  2. C. H. Wang,, L. R. F.Rose, R. Callinan, A.A. Baker, Thermal stresses in a plate with acircular reinforcement, Int. Journal of Solids and Structures, 37: 4577–4599, 2000
  3. M. Gigliotti, F. Jacquemin, and A. Vautrin, On the maximum curvatures of 0/90 plates under thermal stres, Composite Structures, 68, 177–184, 2005
  4. O. Sayman and M. Kayrici, An elastic-plastic stress analysis in a thermoplastic composite cantilever beam, Composite Science and Technology, 60, 623–632, 1999
  5. M. Şenel, H. Akbulut and M. Toparlı, Residual stress analysis in symmetric thermoplastic laminated plates under thermal loads analytic solution, Journal of Thermoplastic Composite Materials, 17, 481–507, 2004
  6. Y. M. Shabana, and N. Noda, Thermo-elasto-plastic stresses in functionally graded materials subjected to thermal loading taking residual stresses of the fabrication process into consideration. Composites Part B: Engineering, 32: 111–121, 2001
  7. O. Sayman, R. Karakuzu, B. Daghan, and S. Kocak, Elastic-plastic stress analysis of thermoplastic composite beams under temperature distributed linearly, Journal of Thermoplastic Composite Materials, 15, 193–208, 2002
  8. A. Ondurucu, and M. Topcu, Thermal residual stresses in simply supported thermoplastic laminated plates under a parabolic temperature distribution, Journal of Thermoplastic Composite Materials, 19, 155-171, 2006
  9. F. Şen, An investigation of thermal elasto-plastic stress analysis of laminated thermoplastic composites with a circular hole under uniform temperature loading, Science and Engineering of Composite Materials, 13, 213-225, 2006
  10. ANSYS 8.0, The general-purpose finite element software, Documentation
  11. R.M. Jones, Mechanics of composite materials, Taylor & Francis Inc., USA, 1999.