Dergiler / Mathematical and Computational Applications / 2010 / Cilt: 15 - Sayı: 2

Modelling the stability of asphalt concrete with fuzzy logic and statistical methods for various freezing and thawing cycles

Sayfa
176–186
DOI
—
🏛️Bu makalenin bibliyografik verileri ve tam metin bağlantısı DergiPark üzerinden sağlanmıştır.
DergiPark Kaydı ↗
✨

Yapay Zeka Hızlı Bakış & Çıkarımlar

AI Insight
⚡ TL;DR(1 Cümlede Hızlı Çıkarım)

Based on the results of this study, it is clear that both the fuzzy logic and statistical methods can be used to model the stability of asphalt concrete under various freezing and thawing conditions.

📌 3 Maddede Bu Makale

🎯
Amaç & Hipotez:The stability of asphalt concrete under the effects of freezing and thawing was studied experimentally, and the experimental test results were modelled using fuzzy logic and statistical methods.
📊
Temel Bulgular & Veri:Asphalt core samples 10 cm in diameter were alternately frozen (–20°C for 16 hr) and thawed (16°C for 8 hr) for 5, 10, 15, 20, 25, and 30 cycles to simulate daily winter conditions.
💡
Sonuç & Katkı:Based on the results of this study, it is clear that both the fuzzy logic and statistical methods can be used to model the stability of asphalt concrete under various freezing and thawing conditions.
🔬Tür:Modelleme & Sayısal Simülasyon
📍Kapsam:Genişletilmiş Akademik Örneklem
⚙️Değişkenler:Alan Parametreleri

Abstract

The stability of asphalt concrete under the effects of freezing and thawing was studied experimentally, and the experimental test results were modelled using fuzzy logic and statistical methods. The stability was investigated experimentally using the Marshall and ultrasound methods. Asphalt core samples 10 cm in diameter were alternately frozen (–20°C for 16 hr) and thawed (16°C for 8 hr) for 5, 10, 15, 20, 25, and 30 cycles to simulate daily winter conditions. The stability of asphalt concrete at the laboratory environment temperature of 17°C was used as a reference. The results showed that the stability of asphalt core samples exposed to freezing and thawing increased, and this increase varied between 22.7% and 19.2% for 5- and 30-day cycles, respectively. By using Fuzzy Logic and statistical methods, prediction models were constituted based on freezing-thawing cycle, bitumen ratio, saturated unit volume weight, volume of voids, air dry unit volume weight to predict the Stability of asphalt concrete which could not be determined with experimental. The experimental results, the fuzzy logic model, and the statistical results showed good correlations. For the stability of asphalt core samples, the correlation coefficient was $R^2$ = 0.88 for the fuzzy logic model and $R^2$ = 1.0 for the statistical method. Based on the results of this study, it is clear that both the fuzzy logic and statistical methods can be used to model the stability of asphalt concrete under various freezing and thawing conditions.

🔖

Bu Makaleye Atıf Yap

ÖZGAN, E. (2010). Modelling the stability of asphalt concrete with fuzzy logic and statistical methods for various freezing and thawing cycles. Mathematical and Computational Applications, Cilt: 15 - Sayı: 2, 176–186. https://ajindex.com/articles/279934

📄 Tam Metin PDF Okuyucu

📄

PDF görüntüleyici hazırlanıyor...

Kaynakça (15)

  1. Robert, R. L., Kandhal, P. S., Brown, E. R., Lee, D., Kennedy, T. W. Hot Mix Asphalt Materials, Mixtures, Design, and Construction, 1st ed. Lanham, Maryland: NAPA Education Foundation; 490p.,1999
  2. Tigdemir, M., Karasahin, M., and Sen, Z., Investigation of fatigue behaviour of asphalt concrete pavements with fuzzy logic approach. International Journal of Fatigue, 24 (8):903– 910, 2002
  3. Cooper, K. E, and Pell, P. S., The effect of mix variables on the fatigue strength of bituminous materials, TRRL Report 633, 1974
  4. Isacsson, U., and Zeng, H., Cracking of asphalt at low temperature as related to bitumen rheology. Journal of Materials Science, 33(8):2165–2170, 1998
  5. Krishnan, J. M., and Rajagopal, K. R., Triaxial testing and stress relaxation of asphalt concrete. Mechanics of Materials, 36 (9):849–864, 2004
  6. Özgan, E., Determining the stability of asphalt concrete at varying temperature and exposure times using destructive and non-destructive methods, Journal of Applied Sciences, 7 (24): 3870–3879, 2007
  7. Ukwuoma, O., Ademodi, B., The effects of temperature and shear rate on the apparent viscosity of Nigerian oil sand bitumen. Fuel Process Techno, 60:95–101,1999
  8. Gardiner, M. S, Brown, E. R., Segregation in hot-mix asphalt pavements, NCHRP Report 441, Washington, DC, USA, National Academy Press., 2000
  9. Bahia, H. U, Hanson, D.I., Characterization of modified asphalt binders in super pave mix design, NCHRP Report.441, National Academy Press, Washington, DC, USA., 2001
  10. Petersen, J. C., Robertson., R. E., Branthaver, J. F., Harnsberger, P. M., Duvall, J. J., Kim, S. S., Anderson, D. A., Christiansen, D. W.; Bahia, H. U., Binder characterization and evaluation, SHRP Report A-367;1. 1994
  11. Coplantz, J. S, Yapp, M. T., Finn, F.N., Review of relationships between modified asphalt properties and pavement performance, SHRP-A-631, 1993
  12. Sousa, J. B., Development and use of the repeated shear test (constant height): an optional Superpave mix design tool. Strategic Highway Research Program Report, SHRP-A-698, 1994
  13. Kandhal, P. S., Rao, S. S., WTSON, d. E., Young, B., Performance of recycled hot mix asphalt mixtures,, NCA Technology Report, 95-01, 1995
  14. Huner, M. H., Brown, E. R., Effects of re-heating and compaction temperature on hot mix asphalt volumetric, NCA Technology Report, 2001 15. West, R. C., Development of rapid QC procedures for evaluation of HMA properties during production., NCAT Report, 2005
  15. McDaniel, R. S.