Dergiler / International Journal of Advances in Engineering and Pure Sciences / 2015 / Cilt: 27 - Sayı: 0

Development of An Inline Quality Measurement System For Tufting Process

Sayfa
1–4
Yayın Tarihi
2015-07-09
DOI
—
🏛️Bu makalenin bibliyografik verileri ve tam metin bağlantısı DergiPark üzerinden sağlanmıştır.
DergiPark Kaydı ↗
✨

Yapay Zeka Hızlı Bakış & Çıkarımlar

AI Insight
⚡ TL;DR(1 Cümlede Hızlı Çıkarım)

Because the preforming process is only partly automatable, high costs arise.

📌 3 Maddede Bu Makale

🎯
Amaç & Hipotez:Öz Missing carbon fibre reinforced plastic production facilities which are fully automated are hindering to the manufacture of large-scale CFRP-components.
📊
Temel Bulgular & Veri:A two-stage procedure consisting of a preforming process and a resin transfer moulding process is recommended for the manufacturing of composites in large scales.
💡
Sonuç & Katkı:Because the preforming process is only partly automatable, high costs arise.
🔬Tür:Araştırma Makalesi
📍Kapsam:Genişletilmiş Akademik Örneklem
⚙️Değişkenler:Anahtar Kelimeler Tufting Process · seam defects · inline quality measurement

Özet

Öz Missing carbon fibre reinforced plastic production facilities which are fully automated are hindering to the manufacture of large-scale CFRP-components. A two-stage procedure consisting of a preforming process and a resin transfer moulding process is recommended for the manufacturing of composites in large scales. Starting point of the preform process are usually flat textiles structures such as woven or multiaxial. After a precut process they further processed in a sequence of handling, forming, joining and edging to complex, near-net-shape textile preform. Afterwards the preform is consolidated via a resin transfer moulding process. Because the preforming process is only partly automatable, high costs arise.

🔖

Bu Makaleye Atıf Yap

ÇETİN, M., SCHOFER, S., GRIES, T. (2015). Development of An Inline Quality Measurement System For Tufting Process. International Journal of Advances in Engineering and Pure Sciences, Cilt: 27 - Sayı: 0, 1–4. https://ajindex.com/articles/257890

📄 Tam Metin PDF Okuyucu

📄

PDF görüntüleyici hazırlanıyor...

Kaynakça (4)

  1. AVK - Industrievereinigung verstärkte Kunststoffe e.V.: Composites - Marktbericht: Marktentwicklungen, Herausforderungen und Chancen, 2010
  2. Ehrenstein, G.W.: Faserverbund-Kunststoffe. Werkstoffe – Verarbeitung – Eigenschaften, 2. Aufl. München, Wien: Carl Hanser Verlag, 2006
  3. Frauenhofer, M.; Dilger, K.; Böhm, S.; Ströhlein, T.: Induction technique in manufacturing preforms, Mechanics of Composite Materials, Vol. 44, No. 5, 2008 Cetin M.; Klingele J.; Wellekötter J.; Samorey, T.; Gries T.: Innovative Use of Expanded Polystyrene (EPS) For Textile Preforming, 1st Joint Turkey-Japan Workshop on Polymeric Composite Materials, Sabancı University, Istanbul, Türkei, 2014
  4. Cetin, M.; Hinck, T.; Pohlmann E.-M.; Gries, T.: Tufting process for preform fixation on foams for safe handling operations, XIII. International Izmir Textile and Apparel Symposium, Belek, Turkey, 2014.