KaydedilenlerDerginizi ekleyin

Dergiler / International Journal of Advances in Engineering and Pure Sciences / 2012 / Cilt: 24 - Sayı: 4

Zinc oxide (ZnO), magnesium hydroxide [Mg(OH)2] and calcium carbonate (CaCO3) filled HDPE polymer composites: Mechanical, thermal and morphological properties

Sezgin ERSOY
Münir TAŞDEMİR
Sayfa
93–104
Yayın Tarihi
2013-03-04
DOI
—
🏛️Bu makalenin bibliyografik verileri ve tam metin bağlantısı DergiPark üzerinden sağlanmıştır.
DergiPark Kaydı ↗
✨

Yapay Zeka Hızlı Bakış & Çıkarımlar

AI Insight
⚡ TL;DR(1 Cümlede Hızlı Çıkarım)

Furthermore, HDPE composites were subjected to examinations to obtain their tensile strengths, yield strengths, elasticity modulus, % elongation, Izod impact strength, hardness, wear strengths, heat deflection temperature (HDT),Vicat softening point and melt flow index (MFI).

📌 3 Maddede Bu Makale

🎯
Amaç & Hipotez:Polymer nanocomposites represent a new alternative to conventionally filled polymers.
📊
Temel Bulgular & Veri:These include increased modulus and strength, outstanding barrier properties, improved solvent and heat resistance and decreased flammability.
💡
Sonuç & Katkı:Furthermore, HDPE composites were subjected to examinations to obtain their tensile strengths, yield strengths, elasticity modulus, % elongation, Izod impact strength, hardness, wear strengths, heat deflection temperature (HDT),Vicat softening point and melt flow index (MFI).
🔬Tür:Araştırma Makalesi
📍Kapsam:Genişletilmiş Akademik Örneklem
⚙️Değişkenler:Magnesium hydroxide · calcium carbonate · zinc oxide

Özet

Polymer nanocomposites represent a new alternative to conventionally filled polymers. Because of their nanometer sizes, filler dispersion nanocomposites exhibit markedly improved properties when compared to the pure polymers or their traditional composites. These include increased modulus and strength, outstanding barrier properties, improved solvent and heat resistance and decreased flammability. In this study, mechanical, thermal and morphological properties of the high density polyethylene (HDPE) composites filled with nano zinc oxide ZnO), magnesium hydroxide [Mg(OH)2]and calcium carbonate (CaCO3) were investigated. The structure and properties of the composites are characterized using a scanning electron microscopy (SEM) and Energy dispersive X-ray spectroscopy (EDS). Furthermore, HDPE composites were subjected to examinations to obtain their tensile strengths, yield strengths, elasticity modulus, % elongation, Izod impact strength, hardness, wear strengths, heat deflection temperature (HDT),Vicat softening point and melt flow index (MFI).

Abstract

Polymer nanocomposites represent a new alternative to conventionally filled polymers. Because of their nanometer sizes, filler dispersion nanocomposites exhibit markedly improved properties when compared to the pure polymers or their traditional composites. These include increased modulus and strength, outstanding barrier properties, improved solvent and heat resistance and decreased flammability. In this study, mechanical, thermal and morphological properties of the high density polyethylene (HDPE) composites filled with nano zinc oxide ZnO), magnesium hydroxide [Mg(OH)2]and calcium carbonate (CaCO3) were investigated. The structure and properties of the composites are characterized using a scanning electron microscopy (SEM) and Energy dispersive X-ray spectroscopy (EDS). Furthermore, HDPE composites were subjected to examinations to obtain their tensile strengths, yield strengths, elasticity modulus, % elongation, Izod impact strength, hardness, wear strengths, heat deflection temperature (HDT),Vicat softening point and melt flow index (MFI).

🔖

Bu Makaleye Atıf Yap

ERSOY, S., TAŞDEMİR, M. (2013). Zinc oxide (ZnO), magnesium hydroxide [Mg(OH)2] and calcium carbonate (CaCO3) filled HDPE polymer composites: Mechanical, thermal and morphological properties. International Journal of Advances in Engineering and Pure Sciences, Cilt: 24 - Sayı: 4, 93–104. https://ajindex.com/articles/257870

📄 Tam Metin PDF Okuyucu

📄

PDF görüntüleyici hazırlanıyor...

Kaynakça (13)

  1. Sahebian, S., Zebarjad, S.M., Sajjadi, S.A., Sherafat, Z., Lazzeri, A. ‘Effect of Both Uncoated and Coated Calcium Carbonate on Fracture Toughness of HDPE/CaCO3 Nanocomposites’ J Appl Polym Sci, 104, 3688-3694 (2007). Ammala,A., Hill, A.J., Meakin, P., Pas, S.J., Turney, T.W. ‘Degradation studies of polyolefins incorporating transparent nanoparticulate zinc oxide UV stabilizers’ J Nanopart Res, 4, 167-174 (2002).
  2. Li, S.C., Li, Y.N. ‘Mechanical and antibacterial properties of modified nano-ZnO/high- density polyethylene composite films with a low doped content of nano-ZnO’ Journal of Applied Polymer Science, 116, 2965-2969 (2010).
  3. Wang, Q., Chen, H., Liu, Y. ‘LDPE-g-MAH prepared through solid-phase mechanochemistry and its compatibilizing effects on HDPE/CaCO3 ‘Polym-plast Technol Eng, 2002, 41(2), 215-228 (2002).
  4. Bartczak, Z., Argon, A.S., Cohen, R.E., Weinberg, M. ‘Toughness mechanism in semi- crystalline polymer blends: II. High-density polyethylene toughened with calcium carbonate filler particles’ Polymer, 40, 2347-2365 (1999).
  5. Thio, Y.S., Argon, A.S., Cohen, R.E., Weinberg, M. ‘Toughening of isotatic polypropylene with CaCO3 particles’ Polymer, 43, 3661-3674 (2002)
  6. Silva, A.L.N., Rocha, M.C.G., Moraes, M.A.R., Valente, C.A.R., Coutinho, F.M.B. ‘Mechanical and rheological properties of composites based on polyolefin and mineral additives’ Polym.Test., 21, 57-60 (2002).
  7. Sun, S.S., Li, C.Z., Zhang, L., Du, H.L., Burnell-Gray, J.S. ‘Effects of surface modification of fumed silica on interfacial structures and mechanical properties of poly(vinyl chloride) composites’ Eur Polym J, 42, 1643-1652 (2006).
  8. Lin, H.B., Cao, M.S., Zhao, Q.L., Shi, X.L., Wang, D.W., Wang, F.C. ‘Mechanical reinforcement and piezoelectric properties of nanocomposites embedded with ZnO nanowhiskers’ Scr Mater, 59, 780-783 (2008).
  9. Zheng, J., Ozisika, R., Siegel, R.W. ‘Disruption of self-assembly and altered mechanical behaviorin polyurethane/zinc oxide nanocomposites’ Polymer, 46, 10873- (2005).
  10. Zuiderduin, W. C., Westzaan, J.C., Hue´tink, J., Gaymans, R.J. ‘Toughening of polypropylene with calcium carbonate particles ‘ Polymer, 44, 261-275 (2003).
  11. He, P., Gao, Y., Lian, J. ‘Surface modification and ultrasonication effect on the mechanical properties of carbon nanofiber/polycarbonate composites ‘ Compos. Part A,, 1270-1275 (2006).
  12. Morales, E., White, J.R. ‘Residual stresses and molecular orientation in particulate- filled polypropylene ’ J Mater Sci, 23, 3612-3622 (1998).
  13. Tjong, S.C.