Dergiler / El-Cezeri / 2021 / Cilt: 8 - Sayı: 2

Hesaplamalı Akışkanlar Dinamiği Kullanılarak Kentsel Katı Atıkların Pirolizinin Deneysel ve Nümerik İncelenmesi

Experimental and Numerical Investigation of Pyrolysis of Municipal Solid Waste with Using Computational Fluid Dynamics

Sayfa
519–532
Yayın Tarihi
2021-05-31
DOI
—
🏛️Bu makalenin bibliyografik verileri ve tam metin bağlantısı DergiPark üzerinden sağlanmıştır.
DergiPark Kaydı ↗
✨

Yapay Zeka Hızlı Bakış & Çıkarımlar

AI Insight
⚡ TL;DR(1 Cümlede Hızlı Çıkarım)

Metan verimi açısından deneysel verilerin analiz ile örtüştüğü görülmüştür.

📌 3 Maddede Bu Makale

🎯
Amaç & Hipotez:Bu çalışmada, sıcaklığın kentsel katı atık pirolizinin nihai ürün verimi üzerindeki etkisini araştırmak için deneyler yapılmıştır.
📊
Temel Bulgular & Veri:Aynı zamanda, üç farklı en-boy oranında tasarlanmış bir piroliz reaktörü için sonlu elemanlar modeli oluşturulmuştur.
💡
Sonuç & Katkı:Metan verimi açısından deneysel verilerin analiz ile örtüştüğü görülmüştür.
🔬Tür:Modelleme & Sayısal Simülasyon
📍Kapsam:2015 · 81 adet
⚙️Değişkenler:Municipal Solid Waste · CFD · Pyrolysis

Özet

Bu çalışmada, sıcaklığın kentsel katı atık pirolizinin nihai ürün verimi üzerindeki etkisini araştırmak için deneyler yapılmıştır. Ayrıca döner fırın sayısal olarak modellenmiş, kütle, enerji ve momentum denklemleri türetilmiştir. Aynı zamanda, üç farklı en-boy oranında tasarlanmış bir piroliz reaktörü için sonlu elemanlar modeli oluşturulmuştur. Kocaeli ili çevre durum raporu 2015'ten alınan verilerle giriş sıcaklığı, tane boyutu ve dönüş hızı için farklı değerler kullanılarak toplam 81 adet hesaplamalı akışkanlar dinamiği analizi gerçekleştirilmiştir. Maksimum metan gazı veriminin elde edildiği analiz şartlarına göre, kentsel katı atıklarından elde edilebilecek enerji potansiyeli hesaplanmıştır. Metan verimi açısından deneysel verilerin analiz ile örtüştüğü görülmüştür.

Abstract

In this study, experiments have been carried out to investigate the effect of temperature on final product yield of pyrolysis of municipal solid waste. In addition, rotary kiln is numerically modeled, mass, energy and momentum equations are derived. At the same time, a finite element model was constructed for a pyrolysis reactor designed at three different aspect ratios. A total of 81 computational fluids dynamics analyzes were carried out by using different values for inlet temperature, particle size and rotation speed with data from Kocaeli province environmental situation report' 2015. According to the analysis conditions, where the maximum methane gas yield is obtained, the energy potential that can be obtained from the municipal solid wastes was calculated. It has been observed that the experimental data overlaps with the analysis in terms of methane yield.

🔖

Bu Makaleye Atıf Yap

POLAT, F., KILINÇEL, M., TOKLU, E. (2021). Hesaplamalı Akışkanlar Dinamiği Kullanılarak Kentsel Katı Atıkların Pirolizinin Deneysel ve Nümerik İncelenmesi. El-Cezeri, Cilt: 8 - Sayı: 2, 519–532. https://ajindex.com/articles/252180

📄 Tam Metin PDF Okuyucu

📄

PDF görüntüleyici hazırlanıyor...

Kaynakça (1)

  1. K. Papadikis, S. Gu, and A. V. Bridgwater, “CFD modelling of the fast pyrolysis of biomass in fluidised bed reactors. Part B. Heat, momentum and mass transport in bubbling fluidised beds,” Chem. Eng. Sci., vol. 64, no. 5, pp. 1036–1045, 2009. [2]M. He et al., “Syngas production from pyrolysis of municipal solid waste (MSW) with dolomite as downstream catalysts,” J. Anal. Appl. Pyrolysis, vol. 87, no. 2, pp. 181–187, 2010. [3]E. Dahlquist, Technologies for converting biomass to useful energy. 2013. [4] M. Agarwal, “An Investigation on the Pyrolysis of Municipal Solid Waste,” RMIT University, 2014. [5] P. Baggio, M. Baratieri, A. Gasparella, and G. a. Longo, “Energy and environmental analysis of an innovative system based on municipal solid waste (MSW) pyrolysis and combined cycle,” Appl. Therm. Eng., vol. 28, no. 2–3, pp. 136–144, Feb. 2008. [6] A. V. BRIDGWATER and G. GRASSI, Biomass pyrolysis liquids upgrading and utilisation. 1991. [7] Polat Fikret, Kılınçel Mert, Toklu Ethem (2017). An experimental study on heating performance of dryer placed in a lab-scale pyrolysis system. International Journal of Mechanical and Production Engineering (IJMPE), 5(2), 158-161., Doi: IJMPE-IRAJ-DOI-7032 [8] N. Couto et al., “Numerical and experimental analysis of municipal solid wastes gasification process,” Appl. Therm. Eng., vol. 78, no. March, pp. 185–195, 2015. [9] W. A. Worrell and P. A. Vesilind, Solid Waste Enginering, 2nd ed., Stamford, USA: Cengage Learning, 2011. [10] A. T. Sipra, N. Gao, and H. Sarwar, “Municipal solid waste (MSW) pyrolysis for bio-fuel production: A review of effects of MSW components and catalysts,” Fuel Process. Technol., vol. 175, no. November 2017, pp. 131–147, 2018. [11] P. J. Reddy, Municipal Solid Waste Management, Hyderabad, India: Taylor & Francis Group, 2001. [12] A. Pariatamby and M. Tanaka, Municipal solid waste management in asia and the pacific ıslands. 2014. [13] Er Sunil Kumar, Waste Management, Vukovar, Croatia: Intech, 2010. [14] C. Acikgoz, O. Onay, and O. M. Kockar, “Fast pyrolysis of linseed: Product yields and compositions,” J. Anal. Appl. Pyrolysis, vol. 71, no. 2, pp. 417–429, 2004. [15] E. Apaydin-Varol, E. Pütün, and A. E. Pütün, “Slow pyrolysis of pistachio shell,” Fuel, vol. 86, no. 12–13, pp. 1892–1899, 2007. [16] B. V. Babu and a. S. Chaurasia, “Modeling & simulation of pyrolysis: influence of particle size and temperature,” … Int. Conf. Multimed. …, vol. 333031, 2002. [17] P. Basu, Biomass gasification and py