KaydedilenlerDerginizi ekleyin

Dergiler / Aquatic Sciences and Engineering / 2021 / Cilt: 36 - Sayı: 3

Upgrading Air Distribution System in the Thermal Units for Fish and Meat Products Aiming at Improving Efficiency of Heat-exchange Processes

Nina USATENKO
Sergii VERBYTSKYİ
Sayfa
146–151
Yayın Tarihi
2021-04-08
DOI
—
🏛️Bu makalenin bibliyografik verileri ve tam metin bağlantısı DergiPark üzerinden sağlanmıştır.
DergiPark Kaydı ↗
✨

Yapay Zeka Hızlı Bakış & Çıkarımlar

AI Insight
⚡ TL;DR(1 Cümlede Hızlı Çıkarım)

The test results confirmed the reliability of analytical calculations and the feasibility of using these fans, which reduces energy consumption, a specific quantity of metal, and the cost of equipment in general.

📌 3 Maddede Bu Makale

🎯
Amaç & Hipotez:The issue of the equivalence of the physical parameters of the working medium in the heat-treat-ment zone of fish and meat products is solved by organizing uniform high-speed fields of the working medium in the working area, which is ensured by the corresponding design.
📊
Temel Bulgular & Veri:In this case, the dimensionless ratio of the cross-sec-tional areas of the equistatic pressure duct to the initial pressure is 0.20, and the cross-sectional area for the air passage of the heat exchanger, conditionally being the perforated base of the duct, was 0.0978 m2.
💡
Sonuç & Katkı:The test results confirmed the reliability of analytical calculations and the feasibility of using these fans, which reduces energy consumption, a specific quantity of metal, and the cost of equipment in general.
🔬Tür:Araştırma Makalesi
📍Kapsam:Genişletilmiş Akademik Örneklem
⚙️Değişkenler:fish and meat products · aerodynamic characteristics · double-sided blower fan

Abstract

The issue of the equivalence of the physical parameters of the working medium in the heat-treat-ment zone of fish and meat products is solved by organizing uniform high-speed fields of the working medium in the working area, which is ensured by the corresponding design. The aerody-namic characteristics of a double-sided centrifugal blower fan with a vertical arrangement of the drive shaft and a spiral scroll with two outlet openings, the outlines of which were carried out ac-cording to the design square rule, provided that the opening and width of each outlet was equal to the half-opening and half-width of the outlet of the spiral case of the industrial prototype, were investigated. When testing the aerodynamic characteristics of a double-sided blower, the identi-ties of the full and dynamic air pressure developed by the fan at all points of the measured cross-section of each of the two oppositely directed outlet pipes are established to be identical, which indicates the equalization of air flows. In this case, the dimensionless ratio of the cross-sec-tional areas of the equistatic pressure duct to the initial pressure is 0.20, and the cross-sectional area for the air passage of the heat exchanger, conditionally being the perforated base of the duct, was 0.0978 m2. The test results confirmed the reliability of analytical calculations and the feasibility of using these fans, which reduces energy consumption, a specific quantity of metal, and the cost of equipment in general.

🔖

Bu Makaleye Atıf Yap

USATENKO, N., VERBYTSKYİ, S. (2021). Upgrading Air Distribution System in the Thermal Units for Fish and Meat Products Aiming at Improving Efficiency of Heat-exchange Processes. Aquatic Sciences and Engineering, Cilt: 36 - Sayı: 3, 146–151. https://ajindex.com/articles/219286

📄 Tam Metin PDF Okuyucu

📄

PDF görüntüleyici hazırlanıyor...

Kaynakça (12)

  1. Adepoju, M. A., Omitoyin, B. O., Ajani, E. K., & Asha, K. (2018). Effect of Smoking Time and Temperature on the Proxi-mate Composition and Quality of Milkfish Steaks. Journal of aquatic food product technology, 27(3), 369-378. https://doi.org/10.1080/10498850.2018.1437494.
  2. Adeyeye, S. A. O. (2019). Smoking of fish: a critical review. Journal of Culinary Science & Technology, 17(6), 559-575 https://doi.org/10.1080/15428052.2018.1495590.
  3. Alakali, J. S., Adekoyeni, O. O., Alaka, I. C., Faasema, J., & Torvor, T. (2017). Fabrication and Performance Evaluation of A Hybrid Fish Smoking Kiln. Journal of Food Processing and Preservation, 41(3), e12935 https://doi.org/10.1111/jfpp.12935.
  4. Belova, M. A., Aleksandrova, G. A., Poruchikov, D. V., & Novikova, G. V. (2013). Processing equipment for heat treatment of agricultural raw materials. Herald of Chuvashia State Pedagogical University named after I. Ya. Yakovlev, 2(78), 12-15.
  5. Bondarenko, N. V. (2013). Research of heat treatment of boiled sausages in advanced thermal chambers. Food Science and Technology, 2(23), 92-93.
  6. Erdoğdu, F. (2005). Mathematical approaches for use of analytical solutions in experimental determination of heat and mass transfer parameters. Food Eng., 68(2), 233-238 https://doi.org/10.1016/j.foodengt.2004.05.038.
  7. Grimitlin, M. I. (1994). Indoor air distribution. St. Petersburg: NPO Ehkoyurus-Vento, 316. Idelchik, I. E. (2013). Reference book on fluid resistance. Moscow: Ripol Classic. Ivashov, V. I. (2007). Technological equipment of the enterprises of meat industry, equipment for meat processing, part 2, 310. St. Petersburg: GIORD; ISBN 5-93879-023-2.
  8. Kosoy, V. D., Ryzhov, S. A. & Dorokhov, V. P. (2018). Improving the process of sausages production (theoretical bases, processes, equipment, formulations and quality control). Moscow: DeLi, 682; ISBN: 978-5-6041606-1-9.
  9. Kovalenko, O., Verbytskyi, S., Yashchenko, L., & Lysenko, H. (2020). Peculiarities of technical means of meat processing industry in Ukraine. The Scientific Journal of Cahul State University “Bogdan Petriceicu Hasdeu” Economic and Engineering Studies, 1(7), 66-72.
  10. Kubiak, M. S., & Jakubowski, M., (2010a). Model symulacyjny warunków przepływu w komorze wędzarniczej. Postępy Techniki Przetwórstwa Spożywczego, 1, 55–57.
  11. Kubiak, M. S., Jakubowski, M., (2010b). Trójwymiarowa analiza symulacyjna CFD rozkładu pola prędkości przepływu mieszaniny dwufazowej w komorze wędzarniczej. Nauka Przyroda Technologie, 4, 5-66.
  12. Kubiak, M. S.; & Jakubow