KaydedilenlerDerginizi ekleyin

Dergiler / European Journal of Technique / 2020 / Cilt: 10 - Sayı: 1

FEASIBILITY OF GOLD BASED HALL DEVICES FOR BIOSENSING PURPOSES

Davut İZCİ
Sayfa
38–51
Yayın Tarihi
2020-06-01
DOI
—
🏛️Bu makalenin bibliyografik verileri ve tam metin bağlantısı DergiPark üzerinden sağlanmıştır.
DergiPark Kaydı ↗
✨

Yapay Zeka Hızlı Bakış & Çıkarımlar

AI Insight
⚡ TL;DR(1 Cümlede Hızlı Çıkarım)

The results showed that using gold to fabricate Hall sensors has merit for potential label-free biosensing purposes by designing a suitable geometry and following relevant microfabrication techniques.

📌 3 Maddede Bu Makale

🎯
Amaç & Hipotez:Hall sensors widely dominates the field of magnetic sensing and they are basically producing information in terms of voltage with respect to applied field.
📊
Temel Bulgular & Veri:In this study, the feasibility of gold-based Hall devices was investigated through different fabrication techniques with and without adding separate layers including materials such as copper, nickel and chromium.
💡
Sonuç & Katkı:The results showed that using gold to fabricate Hall sensors has merit for potential label-free biosensing purposes by designing a suitable geometry and following relevant microfabrication techniques.
🔬Tür:Araştırma Makalesi
📍Kapsam:Genişletilmiş Akademik Örneklem
⚙️Değişkenler:Hall sensors · microfabrication · gold-based Hall devices

Abstract

Hall sensors widely dominates the field of magnetic sensing and they are basically producing information in terms of voltage with respect to applied field. The produced output depends on several parameters such as carrier mobility, carrier concentration, thickness and device geometries. In brief materials with higher mobility and less thickness provides better candidates for such purposes. Looking at those parameters, gold-based Hall devices may not be thought of as the best candidate for magnetic field sensing, however, this does not suggest that it cannot be used for biosensing purposes. Gold presents an advantage of potential label-free biosensing device development since it can easily be functionalized for biosensing purposes. In this study, the feasibility of gold-based Hall devices was investigated through different fabrication techniques with and without adding separate layers including materials such as copper, nickel and chromium. The characterization has revealed that devices with smaller dimensions produces better output. The results showed that using gold to fabricate Hall sensors has merit for potential label-free biosensing purposes by designing a suitable geometry and following relevant microfabrication techniques.

🔖

Bu Makaleye Atıf Yap

İZCİ, D. (2020). FEASIBILITY OF GOLD BASED HALL DEVICES FOR BIOSENSING PURPOSES. European Journal of Technique, Cilt: 10 - Sayı: 1, 38–51. https://ajindex.com/articles/201941

📄 Tam Metin PDF Okuyucu

📄

PDF görüntüleyici hazırlanıyor...

Kaynakça (1)

  1. S. P. Mohanty and E. Koucianos, “Biosensors: A tutorial review,” IEEE Potentials, vol. 25, no. 2, pp. 35–40, 2006.[2] S. Song, H. Xu, and C. Fan, “Potential diagnostic applications of biosensors: Current and future directions,” Int. J. Nanomedicine, vol. 1, no. 4, pp. 433–440, 2006.[3] S. K. Vashist, “Point-of-care diagnostics: Recent advances and trends,” Biosensors, vol. 7, no. 4. 2017.[4] S. Vigneshvar, C. C. Sudhakumari, B. Senthilkumaran, and H. Prakash, “Recent advances in biosensor technology for potential applications - an overview,” Front. Bioeng. Biotechnol., vol. 4, no. FEB, p. 11, 2016.[5] B. Wang, U. Akiba, and J. I. Anzai, “Recent progress in nanomaterial-based electrochemical biosensors for cancer biomarkers: A review,” Molecules, vol. 22, no. 7, p. 1048, 2017.[6] D. Issadore et al., “Magnetic sensing technology for molecular analyses,” Lab Chip, vol. 14, no. 14, pp. 2385–2397, 2014.[7] T. Takamura, P. J. Ko, J. Sharma, R. Yukino, S. Ishizawa, and A. Sandhu, “Magnetic-particle-sensing based diagnostic protocols and applications,” Sensors (Switzerland), vol. 15, no. 6, pp. 12983–12998, 2015.[8] J. Llandro, J. J. Palfreyman, A. Ionescu, and C. H. W. Barnes, “Magnetic biosensor technologies for medical applications: A review,” Med. Biol. Eng. Comput., vol. 48, no. 10, pp. 977–998, 2010.[9] R. S. Popović, Hall effect devices, 2nd ed. Philadelphia: Institute of Physics Pub., 2004.[10] J. Izci, Davut; Hedley, “Constructing an Electronic Circuitry for Label-free Hall Biosensors,” Balk. J. Electr. Comput. Eng., vol. 7, no. 4, pp. 366–372, 2019.[11] G. Rizzi, F. W. Osterberg, A. D. Henriksen, M. Dufva, and M. F. Hansen, “On-chip magnetic bead-based DNA melting curve analysis using a magnetoresistive sensor,” J. Magn. Magn. Mater., vol. 380, pp. 215–220, 2015.[12] M. Volmer and M. Avram, “Using permalloy based planar hall effect sensors to capture and detect superparamagnetic beads for lab on a chip applications,” J. Magn. Magn. Mater., vol. 381, pp. 481–487, 2015.[13] T. Q. Hung, S. Oh, J. R. Jeong, and C. G. Kim, “Spin-valve planar Hall sensor for single bead detection,” Sensors Actuators, A Phys., vol. 157, no. 1, pp. 42–46, 2010.[14] D. Drung et al., “Highly sensitive and easy-to-use SQUID sensors,” IEEE Trans. Appl. Supercond., vol. 17, no. 2, pp. 699–704, 2007.[15] D. Izci, C. Dale, N. Keegan, and J. Hedley, “The Construction of a Graphene Hall Effect Magnetometer,” IEEE Sens. J., vol. 18, no. 23, pp. 9534–9541, Dec. 2018.[16] A. Sandhu, Y