Dergiler / European Journal of Technique / 2019 / Cilt: 9 - Sayı: 1

THE EFFECT OF HOT WATER AGEING ON THE GLASS FIBER REINFORCED EPOXY COMPOSITE

Sayfa
13–24
Yayın Tarihi
2019-06-30
DOI
—
🏛️Bu makalenin bibliyografik verileri ve tam metin bağlantısı DergiPark üzerinden sağlanmıştır.
DergiPark Kaydı ↗
✨

Yapay Zeka Hızlı Bakış & Çıkarımlar

AI Insight
⚡ TL;DR(1 Cümlede Hızlı Çıkarım)

As a result of experimental study, it was found that the moisture absorption rates increased but the failure load values decreased together with the increase in water temperature and duration of hot water ageing.

📌 3 Maddede Bu Makale

🎯
Amaç & Hipotez:In the present study, the effects of hot water ageing on the glass fiber reinforced epoxy woven composites were experimentally examined.
📊
Temel Bulgular & Veri:The specimens in three groups which undamaged, damaged, and single patch-repaired ones were kept in tap water at 50°C and 70°C temperature for 8 days and 16 days.
💡
Sonuç & Katkı:As a result of experimental study, it was found that the moisture absorption rates increased but the failure load values decreased together with the increase in water temperature and duration of hot water ageing.
🔬Tür:Araştırma Makalesi
📍Kapsam:Genişletilmiş Akademik Örneklem
⚙️Değişkenler:Composites · Single patch-repaired · Adhesive bonded

Abstract

In the present study, the effects of hot water ageing on the glass fiber reinforced epoxy woven composites were experimentally examined. The specimens in three groups which undamaged, damaged, and single patch-repaired ones were kept in tap water at 50°C and 70°C temperature for 8 days and 16 days. At the end of those periods, the moisture absorption rates were calculated, the maximum failure loads at the end of period of keeping in hot water were determined and the failure modes occurring on these specimens were observed and compared. As a result of experimental study, it was found that the moisture absorption rates increased but the failure load values decreased together with the increase in water temperature and duration of hot water ageing.

🔖

Bu Makaleye Atıf Yap

ÖRÇEN, G., ÖRÇEN, G. (2019). THE EFFECT OF HOT WATER AGEING ON THE GLASS FIBER REINFORCED EPOXY COMPOSITE. European Journal of Technique, Cilt: 9 - Sayı: 1, 13–24. https://ajindex.com/articles/201693

📄 Tam Metin PDF Okuyucu

📄

PDF görüntüleyici hazırlanıyor...

Kaynakça (1)

  1. Campilho, R.D.S.G., Moura, M.F.S.F., Domingues, J.J.M.S., Numerical prediction on the tensile residual strength of repaired CFRP under different geometric changes, International Journal of Adhesion & Adhesives, 29 (2009) 195– 205.[2] Campilho, R.D.S.G., Mmnoura, M.F.S.F., Domingues, J.J.M.S, Modelling single and double-lap repairs on composite materials, Composites Science and Technology, 65 (2005) 1948–1958.[3] Toudeshky, H. H., Mohammadi, B., Mixed-mode numerical and experimental fatigue crack growth analyses of thick aluminium panels repaired with composite patches, Composite Structures, 91 (2009) 1–8.[4] Toudeshky, H. H., Mohammadi, B., Daghyani, H. R., Mixed-mode fracture analysis of aluminium repaired panels using composite patches, Composites Science and Technology, 66 (2006) 188–198. [5] Toudeshky, H.H., Effects of Composite Patches on Fatigue Crack Propagation of Single-side Repaired Aluminum Panels, Composite Structures,76 (2006), 243–251. [6] Oudad, W., Bouiadjra, B. B., Belhouari, M., Touzain, S., Feaugas, X., Analysis of the plastic zone size ahead of repaired cracks with bonded composite patch of metallic aircraft structures, Computational Materials Science, 46 (2009) 950–954.[7] Ouinas, D., Bouiadjra, B.B.,Serier, B., Bekkouche, M. S., Comparison of the effectiveness of boron/epoxy and graphite/epoxy patches for repaired cracks emanating from a semicircular notch edge, Composite Structures, 80 (2007) 514–522. [8] Ouinas, D., Sahnoune, M., Bebderdouche, N., Bouiadjdjra, B.B., Stress İntensity Factor Analysis for Notched Cracked Structure Repaired by Composite Patching, Materials and Design, 30 (2009), 2302–2308. [9] Bouiadjra, B. B., Belhouari, M., Serier, B., Computation of the stress intensity factors for repaired cracks with bonded composite patch in mode I and mixed mode, Composite Structures, 56 (2002) 401–406. [10] Bouiadjra, B.B., Rezgani, L., Ouinas, D., Belhouari, M., Ziadi, A., Numerical Analysis of the Notch effect and the Behaviour of Notch Crack in Adhesively Bonded Composite Laminates, Computational Materials Science. 38 (2007), 759–764. [11] Papanikos, P., Tserpes, K.I., Pantelakis, Sp., Initiation and progression of composite patch debonding in adhesively repaired cracked metallic sheets, Composite Structures, 81 (2007) 303–311. [12] Umamaheswar, T.V.R.S., Singh, R., Modelling of a patch repair to a thin cracked sheet, Engineering Fracture Mechanics, 62 (1999), 267-289. [13] Charalambides, M.N., Hardouin, R., Kinloch