Dergiler / Kastamonu Üniversitesi Orman Fakültesi Dergisi / 2017 / Cilt: 17 - Sayı: 2

Yüzey kaplamasına eklenen amonyum fosfat ve borik asidin yanma direnci üzerine etkisinin araştırılması

Investigation of the effect on combustion resistance of ammonium polyphosphate and boric acid chemicals added to surface coating

Sayfa
290–297
DOI
—
🏛️Bu makalenin bibliyografik verileri ve tam metin bağlantısı DergiPark üzerinden sağlanmıştır.
DergiPark Kaydı ↗
✨

Yapay Zeka Hızlı Bakış & Çıkarımlar

AI Insight
⚡ TL;DR(1 Cümlede Hızlı Çıkarım)

Araştırma vurguları: Ahşap esaslı levhaların yüzeylerinin kaplanması ve bu kaplama içerisine FR kimyasalı ve mineral eklenmesi yanma özelliklerini geciktirmektedir

📌 3 Maddede Bu Makale

🎯
Amaç & Hipotez:Özet Çalışmanın amacı: Bu çalışmanın amacı, yüzey kaplamasına eklenen amonyum polifosfat (APP) ve borik asidin (BA) yanma direnci üzerine etkisini belirlemek olacaktır.
📊
Temel Bulgular & Veri:Karışım içindeki tutkal (%10), BA ve APP (%1, %3 ve %5) oranı, kalsitin tam kuru ağırlığına göre belirlenmiştir.
💡
Sonuç & Katkı:Araştırma vurguları: Ahşap esaslı levhaların yüzeylerinin kaplanması ve bu kaplama içerisine FR kimyasalı ve mineral eklenmesi yanma özelliklerini geciktirmektedir
🔬Tür:Deneysel Tarla Denemesi
📍Kapsam:Genişletilmiş Akademik Örneklem
⚙️Değişkenler:MDF · Ammonium polyphosphate · combustion

Özet

Özet Çalışmanın amacı: Bu çalışmanın amacı, yüzey kaplamasına eklenen amonyum polifosfat (APP) ve borik asidin (BA) yanma direnci üzerine etkisini belirlemek olacaktır. Çalışma alanı: Ahşap esaslı levhalarda, yanmazlık özelliğinin geciktirilmesini sağlamak Materyal ve Yöntem: Yüzey kaplama karışımı kalsit, tutkal, yanmayı geciktirici kimyasallar ve su karışımından oluşmaktadır. Karışım içindeki tutkal (%10), BA ve APP (%1, %3 ve %5) oranı, kalsitin tam kuru ağırlığına göre belirlenmiştir. Yüzeyi 0.25 mm kalınlıktaki karışım ile kaplanmış MDF test örneklerinin yanma testleri ASTM E 69 standartlarına göre yapılmıştır. Örneklerin ağırlık kaybı miktarları dijital terazi ile belirlenirken, sıcaklık, O2, CO ve NO değerleri Testo 340 M gaz analizörü ile ölçülmüştür. Her test için 30 saniye aralıklar ile 20 ölçüm yapılmıştır. Sonuçlar: Elde edilen sonuçlara göre; kalsit ile kaplamanın yanı sıra yanmayı geciktirici (FR) kimyasal eklenmesi yanma direncini artırmıştır. En düşük ağırlık kaybı APP %5 ile muamele edilmiş örneklerde bulunmuştur. Araştırma vurguları: Ahşap esaslı levhaların yüzeylerinin kaplanması ve bu kaplama içerisine FR kimyasalı ve mineral eklenmesi yanma özelliklerini geciktirmektedir

Abstract

Abstract Aim of study: The purpose of this study were determined the effect of ammonium polyphosphate (APP) and boric acid (BA) as surface coating materials on combustion resistance of MDF panels. Area of study: To ensure the retardation of combustion properties of wood based panels Material and Methods: Surface coating mixture consists of calcite, glue, fire retardant (FR) and water. The amount of glue (10%), APP and BA (1%, 3% and 5%) in the mixture was determined by the oven dry weight of calcite. Combustion tests of Medium Density Fiberboard (MDF) test specimens coated with 0.25 mm thickness of this mixture were carried out according to ASTM E 69 standards. Temperature, O2, CO and NO contents of samples were measured with Testo 340 M gas analyzer while weight loss was measured with digital scales. For each test, 20 measurements were recorded at intervals of 30 seconds. Main results: According to the obtained results, besides calcite coating, the increase of FR addition rate increased the resistance of combustion. It was found that the weight loss of the samples treated with APP 5% was the lowest (66,7%). Research highlights: The coating of the surfaces of wood-based boards and the addition of FR chemistry and mineral to this coating delays the burning properties

🔖

Bu Makaleye Atıf Yap

ÖZDEMİR, F., AYAZ, A. (2017). Yüzey kaplamasına eklenen amonyum fosfat ve borik asidin yanma direnci üzerine etkisinin araştırılması. Kastamonu Üniversitesi Orman Fakültesi Dergisi, Cilt: 17 - Sayı: 2, 290–297. https://ajindex.com/articles/197784

📄 Tam Metin PDF Okuyucu

📄

PDF görüntüleyici hazırlanıyor...

Kaynakça (12)

  1. Roger R.M. 2005. Handbook of wood chemistry and wood composites, p 383
  2. Hashim R., Murphy R.J., Dickinson D.J., Dinwoodie J.M. 1994. The mecanical properties of boards treated with vapor boron, Forest Products Journal 44,73-79
  3. Akbulut T., Kartal S.N., Green, F. 2004. Fiberboards treated with N’-N-(1, 8-Naphthalyl) hydroxylamine (NHA-Na), borax, and boric acid, Forest Prod. J. 54(10): 59–64 4. Sparkes T. 1993. Substrate selection for end use applications,” Koln, Germany: European Plastic Laminates Forum, p. 27–31
  4. Ayrılmıs N. 2007. effect of fire retardants on ınternal bond strength and bond durability of structural fiberboard, Building and Environment, Elsevier Volume 42, Issue 3, March, Pages 1200-1206
  5. ASTM E-69, 2007. Standart test method for combustible properties of treated wood by the fire-tube apparatus, American Society for Testing Materials, Philadelphia 7. Sweet M.S., LeVan S.L., White R.H., Tran H.C., and Degroot R. 1996. Fire performance of wood treated with combined fire-retardant and preservative systems, Research Paper FPL–RP–545. US Dept. Agriculture, Forest Service, Forest Products Laboratory, Madison, WI
  6. Tomak E. D., Baysal E., and Peker H. 2012. The effect of some wood preservatives on the thermal degradation of Scots pine, Thermochimica Acta, 547, 76-82
  7. Özdemir F., Tutuş A. 2016. Effects of coating with calcite togetter with various fire retardants of on the fire properties of particleboard, BioResources, 11(3), 6407-6415
  8. Özçifçi A., and Okçu O. 2008. Impacts of some chemicals on combustion properties of impregnated laminated veneer lumber (LVL), Journal of materials processing technology, 199(1), 1-9
  9. İstek A., Aydemir D., and Eroğlu H. 2013. Combustion properties of medium-density fiberboards coated by a mixture of calcite and various fire retardants. Turkish Journal of Agriculture and Forestry 37.5 (2013): 642-648
  10. Hashim R., Sulaiman O., Kumar R. N., Tamyez P. F., Murphy R. J., and Ali Z. 2009. Physical and mechanical properties of flame retardant urea formaldehyde medium density fiberboard, Journal of Materials Processing Techonology, 209(2), 635-640
  11. Wan Hanafi, W.Z.A., and Hornsby P.R. 1993. Smoke suppression and fire retardancy in unsaturated polyesters hydrated fillers, Plastics, Rubber Compos. Process. Appl. 19 (3), 175–184
  12. Temiz A., Gezer E. D., Yildiz, U. C., and Yıldız, S. 2008. Combustion properties of alder (Alnus glutinosa L.) Gaertn.subsp. barbata (CA Mey) Yalt. and southern pi