Several numerical procedure alternatives were investigated to evaluate their effect on the agreement of the results with the experimental data and the computational cost.
📌 3 Maddede Bu Makale
🎯
Amaç & Hipotez:This paper first presents the well-established analytical and numerical methods used to calculate the elastic properties of woven fabric reinforced textile composite laminates.
📊
Temel Bulgular & Veri:An experimental study follows where an E-glass plain woven fabric/epoxy composite laminate was manufactured and tested in order to measure the modulus of elasticity and yarn dimensions, and also to observe the typical damage patterns.
💡
Sonuç & Katkı:Several numerical procedure alternatives were investigated to evaluate their effect on the agreement of the results with the experimental data and the computational cost.
This paper first presents the well-established analytical and numerical methods used to calculate the elastic properties of woven fabric reinforced textile composite laminates. An experimental study follows where an E-glass plain woven fabric/epoxy composite laminate was manufactured and tested in order to measure the modulus of elasticity and yarn dimensions, and also to observe the typical damage patterns. Next, a state-of-the-art geometry modelling and a finite element analysis software was used in combination to predict the modulus of elasticity using the experimentally determined yarn dimensions. Several numerical procedure alternatives were investigated to evaluate their effect on the agreement of the results with the experimental data and the computational cost.
ATAŞ, A., İNAL, O. (2018). EXPERIMENTAL CHARACTERISATION AND PREDICTION OF ELASTIC PROPERTIES OF WOVEN FABRIC REINFORCED TEXTILE COMPOSITE LAMINATES. Eskişehir Technical University Journal of Science and Technology A - Applied Sciences and Engineering, Cilt: 19 - Sayı: 3, 660–670. https://ajindex.com/articles/197039
Ataş, A., et al., Bolted Joints in Three Axially Braided Carbon Fibre/Epoxy Textile Composites with Moulded-in and Drilled Fastener Holes. Applied Composite Materials, 2017. 24(2): p. 449-460
Ogin, S. and P. Potluri, Textile-reinforced composite materials. Handbook of Technical Textiles: Technical Textile Applications, 2016. 2: p. 1
Adanur, S. and T. Liao, 3D modeling of textile composite preforms. Composites Part B: Engineering, 1998. 29(6): p. 787-793
Chou, T.-W., Microstructural design of fiber composites. 1992: Cambridge University Press
Naik, R.A., Analysis of woven and braided fabric reinforced composites. 1994
Ishikawa, T. and T.-W. Chou, Stiffness and strength behaviour of woven fabric composites. Journal of Materials Science, 1982. 17(11): p. 3211-3220
Naik, N. and P. Shembekar, Elastic behavior of woven fabric composites: I—Lamina analysis. Journal of composite materials, 1992. 26(15): p. 2196-2225
Naik, N. and V. Ganesh, Prediction of on-axes elastic properties of plain weave fabric composites. Composites Science and Technology, 1992. 45(2): p. 135-152
Naik, N. and V. Ganesh, An analytical method for plain weave fabric composites. Composites, 1995. 26(4): p. 281-289
Scida, D., et al., A micromechanics model for 3D elasticity and failure of woven-fibre composite materials. Composites Science and Technology, 1999. 59(4): p. 505-517
Whitcomb, J., K. Woo, and S. Gundapaneni, Macro finite element for analysis of textile composites. Journal of composite materials, 1994. 28(7): p. 607-618
Whitcomb, J. and K. Woo, Enhanced direct stiffness method for finite element analysis of textile composites. Composite structures, 1994. 28(4): p. 385-390
Chapman, C. and J. Whitcomb, Effect of assumed tow architecture on predicted moduli and stresses in plain weave composites. Journal of Composite Materials, 1995. 29(16): p. 2134-2159
Whitcomb, J., K. Srirengan, and C. Chapman, Evaluation of homogenization for global/local stress analysis of textile composites. Composite structures, 1995. 31(2): p. 137-149
Whitcomb, J. and K. Srirengan, Effect of various approximations on predicted progressive failure in plain weave composites. Composite structures, 1996. 34(1): p. 13-20
Woo, K. and J.D. Whitcomb, Three-dimensional failure analysis of plain weave textile composites using a global/local finite element method. Journal of composite materials, 1996. 30(9): p. 984-1003