Dergiler / Ege Üniversitesi Diş Hekimliği Fakültesi / 2020 / Cilt: 41 - Sayı: 3

Farklı Isıl İşlem Uygulanmış Nikel Titanyum Eğelerin Döngüsel Yorgunluk Dirençlerinin Karşılaştırılması

The Comparative Evaluation of Cyclic Fatique Resistance of Different Heat-treated NiTi Instruments

Sayfa
209–213
DOI
—
🏛️Bu makalenin bibliyografik verileri ve tam metin bağlantısı DergiPark üzerinden sağlanmıştır.
DergiPark Kaydı ↗
✨

Yapay Zeka Hızlı Bakış & Çıkarımlar

AI Insight
⚡ TL;DR(1 Cümlede Hızlı Çıkarım)

Bulgular: Eğelerin kırılma dayanımının yüksekten düşüğe sıralaması Scope RS CM, Scope RS Gold ve Scope RS Blue olarak bulundu.

📌 3 Maddede Bu Makale

🎯
Amaç & Hipotez:Amaç: Farklı ısıl işlem uygulamaları ile üretilmiş nikel titanyum eğelerinin döngüsel yorgunluk dirençlerinin karşılaştırılmasıdır.
📊
Temel Bulgular & Veri:Yöntem: On ikişer adet Scope RS Gold (25.06), Scope RS Blue (25.06) ve Scope RS “controlled memory” (CM) (25.06) nikel titanyum eğeleri çalışmaya dâhil edildi.
💡
Sonuç & Katkı:Bulgular: Eğelerin kırılma dayanımının yüksekten düşüğe sıralaması Scope RS CM, Scope RS Gold ve Scope RS Blue olarak bulundu.
🔬Tür:Araştırma Makalesi
📍Kapsam:Genişletilmiş Akademik Örneklem
⚙️Değişkenler:Alan Parametreleri

Özet

Amaç: Farklı ısıl işlem uygulamaları ile üretilmiş nikel titanyum eğelerinin döngüsel yorgunluk dirençlerinin karşılaştırılmasıdır. Yöntem: On ikişer adet Scope RS Gold (25.06), Scope RS Blue (25.06) ve Scope RS “controlled memory” (CM) (25.06) nikel titanyum eğeleri çalışmaya dâhil edildi. Eğeler 60° kanal kurvatür açısına ve 3 mm kurvatür yarı çapına sahip paslanmaz çelikten yapılmış yapay kanallar kullanılarak döngüsel yorgunluk testi uygulandı. Eğeler kırılıncaya kadar geçen süre kaydedildi ve eğelerin kırılıncaya kadar gerçekleştirdiği tur sayısı hesaplandı. Elde edilen veriler One-way ANOVA ve post-hoc Tukey testi ile istatistiksel olarak değerlendirildi. Bulgular: Eğelerin kırılma dayanımının yüksekten düşüğe sıralaması Scope RS CM, Scope RS Gold ve Scope RS Blue olarak bulundu. Scope RS CM eğelerinin döngüsel yorgunluk direnci diğer gruplardan istatistiksel olarak anlamlı düzeyde yüksek bulundu (p 0,05). Sonuç: Çalışmamızın sınırları dâhilinde, Scope RS CM nikel titanyum eğesinin döngüsel yorgunluk direnci Scope RS Gold ve Scope RS Blue eğelerinden daha yüksek bulunmuştur.

Abstract

Objective: To compare the cyclic fatigue resistance of different heat-treated NiTi files. Methods: Scope RS Gold (25.06), Scope RS Blue (25.06) and Scope RS controlled memory (CM) (25.06) nickel titanium files were included in the present study (n=12). According to the manufacturer instruction files were rotated in an artificial stainless steel canal with 3 mm radius and 60° angle of curvature. The time to failure of files was recorded and the number of cycles to failure of the files were calculated. The data were analysed with One-way ANOVA and post-hoc Tukey tests. Results: The mean number of cycles to failure of files highest to lowest was Scope RS CM, Scope RS Gold and Scope RS Blue, respectively. A statistically significant difference was noted between Scope CM and the other two groups (p 0.05).Conclusion: Within the limitation of the present study the cyclic fatigue resistance of Scope RS CM nickel titanium files was greater than the Scope RS Blue and Scope RS Gold nickel titanium files.

🔖

Bu Makaleye Atıf Yap

DEMİRCİ, G. K., KURT, S. M., SEREFOĞLU, B., KAVAL, M. E., ÇALIŞKAN, M. K. (2020). Farklı Isıl İşlem Uygulanmış Nikel Titanyum Eğelerin Döngüsel Yorgunluk Dirençlerinin Karşılaştırılması. Ege Üniversitesi Diş Hekimliği Fakültesi, Cilt: 41 - Sayı: 3, 209–213. https://ajindex.com/articles/194682

📄 Tam Metin PDF Okuyucu

📄

PDF görüntüleyici hazırlanıyor...

Kaynakça (13)

  1. Bird DC, Chambers D, Peters OA. Usage parameters of nickel-titanium rotary instruments: a survey of endodontists in the United States. J Endod 2009;35:1193-1197
  2. Sattapan B, Nervo GJ, Palamara JE, Messer HH. Defects in rotary nickel-titanium files after clinical use. J Endod 2000;26:161-165
  3. Bergmans L, Van Cleynenbreugel J, Wevers M, Lambrechts P. Mechanical root canal preparation with NiTi rotary instruments: rationale, performance and safety. Am J Dent 2001;14:324-333
  4. Young JM, Van Vliet KJ. Predicting in vivo failure of pseudoelastic NiTi devices under low cycle, high amplitude fatigue. J Biomed Mater Res B Appl Biomater 2005;72:17-26
  5. Perez-Higueras JJ, Arias A, de la Macorra JC. Cyclic fatigue resistance of K3, K3XF,and twisted file nickel-titanium files under continuous rotation or reciprocating motion. J Endod 2013;39:1585– 1588
  6. Topçuoğlu HS, Düzgün S, Aktı A, Topçuoğlu G. Laboratory comparison of cyclic fatigue resistance of WaveOne Gold, Reciproc and WaveOne files in canals with a double curvature. Int Endod J 2017;50:713–717
  7. Zupanc J, Vahdat-Pajouh N, Schäfer E. New thermomechanically treated NiTi alloys - a review. Int Endod J 2018;51:1088-1103
  8. Hieawy A, Haapasalo M, Zhou H, et al. Phase transformation behavior and resistance to bending and cyclic fatigue of ProTaper Gold and ProTaper Universal instruments. J Endod 2015;41:1134– 1138
  9. Silva EJ, Muniz BL, Pires F, et al. Comparison of canal transportation in simulated curved canals prepared with ProTaper Universal and ProTaper Gold systems. Restor Dent Endod 2016;41:1–5
  10. Shen Y, Zhou HM, Zheng YF, Peng B, Haapasalo M. Current challenges and concepts of the thermomechanical treatment of nickel-titanium instruments. J Endod 2013; 39:163–172
  11. Gao Y, Gutmann JL, Wilkinson K, Maxwell R, Ammon D. Evaluation of the impact of raw materials on the fatigue and mechanical properties of ProFile Vortex rotary instruments. J Endod 2012;38:398–401
  12. Kaval ME, Capar ID, Ertas H. Evaluation of the cyclic fatigue and torsional resistance of novel nickel-titanium rotary files with various alloy properties. J Endod 2017; 42:1840–1843
  13. Gambarini G, Grande NM, Plotino G, et al. Fatigue resistance of engine-driven rotary nickel-titanium instruments produced by new manufacturing methods. J Endod 2008; 34:1003–1005. 14. https://scopeendo.com.tr/wpcontent/ uploads/2020/06/Kullanım-Kılavuzu- RS.pdf 15. Cheung G, Zhang E, Zheng Y. A numerical method for predicting the bending f