Antiwindup design for the speed loop PI controller of a PMSM servo system

Temel Bulgular & Veri:The proposed method will calculate the gain of the back-calculation based on the input and output status of the PI regulator without the requirement of motor parameters, such as the inertial and torque-current coefficient, and the back-calculation gain will vary with the speed command in order to obtain the optimal dynamic performance.

💡

Sonuç & Katkı:It reduces the difficulty of the parameter tuning for the PI controller.

🔬Tür:Araştırma Makalesi

📍Kapsam:Genişletilmiş Akademik Örneklem

⚙️Değişkenler:PMSM · antiwindup · integration saturation

Özet

A novel antiwindup (AW) strategy for a proportional-integral (PI) regulator based on the back-calculation method is presented. The proposed method will calculate the gain of the back-calculation based on the input and output status of the PI regulator without the requirement of motor parameters, such as the inertial and torque-current coefficient, and the back-calculation gain will vary with the speed command in order to obtain the optimal dynamic performance. The proposed method avoids the problem caused by the fixed back-calculation gain in the classical AW strategy, and prevents the system from untimely saturation withdrawing or an unexpected overshoot due to the inappropriate back-calculation gain, respectively. The proposed AW strategy is compared with the classical AW design by simulation and experiment on an application platform of a permanent magnet synchronous motor servo system. A PI controller with the proposed AW design will decrease the overshoot with a small settling time of the system's step-response, which can be observed obviously in wide dynamic variation. It reduces the difficulty of the parameter tuning for the PI controller.

Abstract

A novel antiwindup (AW) strategy for a proportional-integral (PI) regulator based on the back-calculation method is presented. The proposed method will calculate the gain of the back-calculation based on the input and output status of the PI regulator without the requirement of motor parameters, such as the inertial and torque-current coefficient, and the back-calculation gain will vary with the speed command in order to obtain the optimal dynamic performance. The proposed method avoids the problem caused by the fixed back-calculation gain in the classical AW strategy, and prevents the system from untimely saturation withdrawing or an unexpected overshoot due to the inappropriate back-calculation gain, respectively. The proposed AW strategy is compared with the classical AW design by simulation and experiment on an application platform of a permanent magnet synchronous motor servo system. A PI controller with the proposed AW design will decrease the overshoot with a small settling time of the system's step-response, which can be observed obviously in wide dynamic variation. It reduces the difficulty of the parameter tuning for the PI controller.

Anahtar kelimeler

PMSM antiwindup integration saturation PI controller

🔖

Bu Makaleye Atıf Yap

YANG, M., NIU, L., XU, D. (2013). Antiwindup design for the speed loop PI controller of a PMSM servo system. Turkish Journal of Electrical Engineering and Computer Science, Cilt: 21 - Sayı: 5, 1318–1327. https://ajindex.com/articles/188489

📄 Tam Metin PDF Okuyucu

Yeni Sekmede Aç ↗

↗Yeni Sekme

📄

PDF görüntüleyici hazırlanıyor...

Kaynakça (11)

K. Astrom, T. Hagglund, PID Controllers: Theory, Design, and Tuning. Research, Triangle Park, North Carolina, The Instrumentation, Systems, and Automation Society; 2 Sub edition, 1995.
P. Youbin, D. Vrancic, R. Hanus, “Anti-windup, bumpless, and conditioned transfer techniques for PID controllers”, IEEE Control Systems Magazine, Vol. 16, pp. 48–57, 1996.
D. Zhang, H. Li, E.G. Collins, “Digital anti-windup PI controller for variable-speed motor drives using FPGA and stochastic theory”, IEEE Transactions on Power Electronics, Vol. 21, pp. 1496–1501, 2006.
G. Herrmann, M.C. Turner, I. Postlethwaite, G. Guoxiao, “Practical implementation of a novel anti-windup scheme in a HDD-dual-stage servo system”, IEEE/ASM Transactions on Mechatronics, Vol. 9, pp. 580–592, 2004.
S. Tarbouriech, M. Turner, “Anti-windup design: an overview of some recent advances and open problems”, IET Control Theory and Applications, Vol. 3, pp. 1–19, 2009.
B. Bahrani, S. Kenzelmann, A. Rufer, “Multivariable-PI-based dq current control of voltage source converters with superior axes decoupling capability”, IEEE Transactions on Industrial Electronics, Vol. 58, pp. 3016–3026, 2011.
R.J. Wai, J.D. Lee, K.L. Chuang, “Real-time PID control strategy for Maglev transportation system via particle swarm optimization”, IEEE Transactions on Industrial Electronics, Vol. 58, pp. 629–646, 2011.
A. Draou, A. Miloudi, E.A. Al-Radadi, “A variable gain PI controller used for speed control of a direct torque neuro fuzzy controlled induction machine drive”, Turkish Journal of Electrical Engineering & Computer Sciences, Vol. 15, pp. 37–49, 2007.
A.F. Bakan, S. Partal, ˙I. S ¸enol, K.N. Bekiro˘ glu, “Online speed control of a brushless AC servomotor based on artificial neural networks”, Turkish Journal of Electrical Engineering & Computer Sciences, Vol. 19, pp. 373–383, 20 J.W. Choi, S.C. Lee, “Antiwindup strategy for PI-type speed controller”, IEEE Transactions on Industrial Electronics, Vol. 56, pp. 2039–2046, 2009.
J.K. Seok, K.T. Kim, D.C. Lee, “Automatic mode switching of P/PI speed control for industry servo drives using online spectrum analysis of torque command”, IEEE Transactions on Industrial Electronics, Vol. 54, pp. 2642–2647, 200 J.K. Seok, “Frequency-spectrum-based antiwindup compensator for PI controlled systems”, IEEE Transactions on Industrial Electronics, Vol. 53, pp. 1781–1790, 2006.
A. Syaichu-Rohman, R.H. Middleton, “Anti-windup schemes for discrete time systems: an LMI-based design”, Proce