Yapay Zeka Hızlı Bakış & Çıkarımlar
AI InsightUltimately, this system presents a potentially sustainable solution for treating environments with dense pharmaceutical loads, such as hospital wastewaters.
📌 3 Maddede Bu Makale
Abstract
The steadily increasing pharmaceutical pollution in water resources has become a critical environmental issue where existing treatment systems fall short. In this project, a filtration system consisting of porous, coagulated chitosan-based adsorbent beads was developed to remove pharmaceutical pollutants from water. In order to achieve more effective adsorption levels, the surface areas of the chitosan beads were expanded through lyophilization. Furthermore, a hybrid adsorption system was subsequently created by physically combining the chitosan beads with activated carbon powder. This newly developed adsorption material derives its effectiveness from the chemical adsorption capacity of chitosan and the large surface area of activated carbon, forming a dual-mechanism treatment material. The components of this system are specifically chosen to be biodegradable. This way, the process reflects a potentially more sustainable adsorbent configuration. In order to evaluate the success of the newly created adsorbent system, two pharmaceuticals that are abundant in water sources, caffeine and naproxen, were used. The pharmaceuticals were used at a high initial concentration of 10 ppm and the system efficacy was tested using a fixed-bed column setup. The experimental results reveal that the hybrid system is highly effective, yielding remarkable initial removal rates of 90.3% for caffeine and 96.4% for naproxen (single-run measurements at each volumetric sampling point; see Methods for statistical considerations). Ultimately, this system presents a potentially sustainable solution for treating environments with dense pharmaceutical loads, such as hospital wastewaters.