KaydedilenlerDerginizi ekleyin

Dergiler / Yenilikçi Mühendislik ve Doğa Bilimleri / 2026 / Volume: 6 Issue: 2

DIC controlled tensile creep behavior of glass fiber reinforced epoxy composites

Yusuf Polat(ERZURUM TECHNICAL UNIVERSITY)0000-0002-4807-7002
Gürkan Kaya(ERZURUM TECHNICAL UNIVERSITY)0000-0002-1696-3202
Elanur Çelebi Kavdir(ERZURUM TECHNICAL UNIVERSITY)0000-0003-1312-403X
Sayfa
—
Yayın Tarihi
2026-07-30
🏛️Bu makalenin bibliyografik verileri ve tam metin bağlantısı DergiPark üzerinden sağlanmıştır.
DergiPark Kaydı ↗
✨

Yapay Zeka Hızlı Bakış & Çıkarımlar

AI Insight
⚡ TL;DR(1 Cümlede Hızlı Çıkarım)

Overall, the DIC technique presented accurate and practical results on time dependent strain behavior of GFRP composites under constant load.

📌 3 Maddede Bu Makale

🎯
Amaç & Hipotez:This study aims to investigation of digital image correlation (DIC) technique application to measure the time-dependent strain distribution under creep behavior of glass fiber reinforced polymer (GFRP) composites.
📊
Temel Bulgular & Veri:First, the 0°, 30°, 45°, and 60° oriented samples were tested under tensile loading conditions to see the force – displacement behavior of GFRP.
💡
Sonuç & Katkı:Overall, the DIC technique presented accurate and practical results on time dependent strain behavior of GFRP composites under constant load.
🔬Tür:Research Article
📍Kapsam:Genişletilmiş Akademik Örneklem
⚙️Değişkenler:Digital image correlation · GFRP · Creep behavior

Abstract

This study aims to investigation of digital image correlation (DIC) technique application to measure the time-dependent strain distribution under creep behavior of glass fiber reinforced polymer (GFRP) composites. A plain-woven glass fiber fabric reinforced epoxy was produced and creep behavior were characterized by considering the effects of fiber orientation. First, the 0°, 30°, 45°, and 60° oriented samples were tested under tensile loading conditions to see the force – displacement behavior of GFRP. Then, same geometry of samples was used to test creep behavior under tensile conditions. The 50% of the ultimate stress for each fiber orientation was set for the creep test. The DIC technique is used to measure the creep strain at various loads at room temperature. The DIC application for creating strain maps showed that the fiber orientation has significant effect on creep, especially for 45°sample due to shear-based deformation. Overall, the DIC technique presented accurate and practical results on time dependent strain behavior of GFRP composites under constant load.

🔖

Bu Makaleye Atıf Yap

Polat, Y., Kaya, G., Kavdir, E. Ç. (2026). DIC controlled tensile creep behavior of glass fiber reinforced epoxy composites. Yenilikçi Mühendislik ve Doğa Bilimleri, Volume: 6 Issue: 2. https://doi.org/10.61112/jiens.1882280

📄 Tam Metin PDF Okuyucu

📄

PDF görüntüleyici hazırlanıyor...

Kaynakça (32)

  1. Seif A, Mahmoud SF, Megahed M (2024) Enhancement of impact, shear and wear performance of glass fiber/epoxy composites by inclusion of polycarbonate sheets. Fibers and Polymers 25:4421–4436. https://doi.org/10.1007/s12221-024-00757-4
  2. Nayak S, Nayak RK, Panigrahi I (2021) Improvement of low-velocity impact and abrasive wear resistance of carbon/glass fiber-reinforced polymer hybrid composites. Transactions of the Indian Institute of Metals 74:2245–2254. https://doi.org/10.1007/s12666-021-02318-2Slifka MK, Whitton JL (2000) Clinical implications of dysregulated cytokine production. J Mol Med. https://doi.org/10.1007/s001090000086
  3. Jiang L, Wang J, Xiao S, Li Y, Yang L (2023) Dynamic tensile properties of carbon/glass hybrid fibre composites under intermediate strain rates via DIC and SEM technology. Thin-Walled Structures 190:110986. https://doi.org/10.1016/j.tws.2023.110986
  4. Bulderberga O, Aniskevich A, Vidinejevs S (2016) A glass-fiber-reinforced composite with a damage indication function. Mechanics of Composite Materials 52:155–162. https://doi.org/10.1007/s11029-016-9568-1
  5. Sun N, et al (2025) Transparent and flame-retardant glass fiber/epoxy composites via structural tailoring. Composites Part B: Engineering 306:112780. https://doi.org/10.1016/j.compositesb.2025.112780
  6. Soudagar MEM, et al (2025) Implications of end cooling rates on the mechanical, viscoelastic, and interlaminar fracture properties of the unidirectional glass fiber/epoxy composites. Composites Part A: Applied Science and Manufacturing 190:108631. https://doi.org/10.1016/j.compositesa.2024.108631
  7. Seyhan A, Irez AB, Polat Y (2023) Development of a polyamide 6-based composite material for UAV propellers. In: Chalivendra V, Gardea F (eds) Mechanics of Composite, Hybrid & Multi-functional Materials, Volume 5. Springer, Cham, pp 73–77. https://doi.org/10.1007/978-3-031-17445-2_10
  8. Ayten AI, Polat Y, Sahbaz M, Seyhan A (2023) Effect of solution-blown nanofibrous web on quasi-static punch shear test results and quasi-static indentation behavior of carbon fiber-reinforced epoxy matrix composites. Journal of Composite Materials 57:3865–3875. https://doi.org/10.1177/00219983231197351
  9. Ayten Aİ, Şahbaz M, Morkavuk S, Polat Y, Seyhan A (2025) Effect of solution-blown polyamide-6 nanofiber interlayer on drilling performance of carbon fiber reinforced composites. Journal of Reinforced Plastics and Composites. https://doi.org/10.1177/07316844251318859
  10. Liao D, et al (2024) Effect of thermal aging on the microscale mechanical response behavior of glass fiber/epoxy composites. Journal of Materials Science 59:15298–15314. https://doi.org/10.1007/s10853-024-10089-6
  11. Gao Q, Zhao X, Sun Q, Wang J, Pan Y (2025) Experiment and finite element characterization on the compressive creep behavior of glass-fiber reinforced polymer composites. Polymer Composites. https://doi.org/10.1002/pc.70584
  12. Brauner C, Herrmann AS, Niemeier PM, Schubert K (2017) Analysis of the non-linear load and temperature-dependent creep behaviour of thermoplastic composite materials. Journal of Thermoplastic Composite Materials 30:302–317. https://doi.org/10.1177/0892705715598359
  13. Yang Y, Hou J, Khabaz-Aghdam A, da Silva LFM, Zhang S (2025) Creep behaviour and life prediction of epoxy structural adhesives used for CFRP strengthening applications. The Journal of Adhesion 101:1570–1599. https://doi.org/10.1080/00218464.2025.2482714
  14. Bastani A, Mitra S, Gorospe K, Das S (2021) Determination of mechanical properties of FRP materials using the DIC method. Journal of Testing and Evaluation 49:3266–3281. https://doi.org/10.1520/JTE20180530
  15. Kavdir EC, Aydin MD (2019) The investigation of mechanical properties of a structural adhesive via digital image correlation (DIC) technic. Composites Part B: Engineering 173:106995.
  16. Cao Y, et al (2024) Improving tensile properties of glass fiber-reinforced epoxy resin composites based on enhanced multiphase structure: The modification of resin systems and glass fibers. Materials Today Communications 40:110225. https://doi.org/10.1016/j.mtcomm.2024.110225
  17. Sharath Chandra HS, Lokesh KS, Ravindra Babu G, Shrinivasa Mayya D, Naveen Kumar JR (2023) Impact of fibre orientation on mechanical properties of GFRP composites. Materials Today: Proceedings 92:78–83. https://doi.org/10.1016/j.matpr.2023.03.754
  18. Mohamed YS, Abdelbary A (2023) Theoretical and experimental study on the influence of fiber orientation on the tensile properties of unidirectional carbon fiber/epoxy composite. Alexandria Engineering Journal 67:693–705. https://doi.org/10.1016/j.aej.2022.12.058
  19. Cordin M, Bechtold T, Pham T (2018) Effect of fibre orientation on the mechanical properties of polypropylene–lyocell composites. Cellulose 25:7197–7210. https://doi.org/10.1007/s10570-018-2079-6
  20. Kumar AL, Prakash M (2021) The effect of fiber orientation on mechanical properties and machinability of GFRP composites by end milling using cutting force analysis. Polymers and Polymer Composites 29:S178–S187. https://doi.org/10.1177/0967391121991289
  21. Gao Q, Zhao X, Sun Q (2025) Evaluation of the off-axis and on-axis tensile creep behavior of glass-fiber reinforced polymer unidirectional lamina. Polymer Composites 46:3054–3069. https://doi.org/10.1002/pc.29153
  22. Sun T, Yu C, Yang W, Zhong J, Xu Q (2020) Experimental and numerical research on the nonlinear creep response of polymeric composites under humid environments. Composite Structures 251:112673. https://doi.org/10.1016/j.compstruct.2020.112673
  23. Ganesh Gupta BNVSK, Sen B, Hiremath MM, Prusty RK, Ray BC (2021) Enhanced creep resistance of GFRP composites through interpenetrating polymer network. International Journal of Mechanical Sciences 212:106728. https://doi.org/10.1016/j.ijmecsci.2021.106728
  24. Hao Z, Chen G, Ke H, Deng L, Liu L (2022) Characterization of out-of-plane tensile stress–strain behavior for GFRP composite materials at elevated temperatures. Composite Structures 290:115477. https://doi.org/10.1016/j.compstruct.2022.115477
  25. Naresh K, Shankar K, Velmurugan R, Gupta NK (2020) High strain rate studies for different laminate configurations of bi-directional glass/epoxy and carbon/epoxy composites using DIC. Structures 27:2451–2465. https://doi.org/10.1016/j.istruc.2020.05.022
  26. Ghosh SK, Prusty RK, Rathore DK, Ray BC (2017) Creep behaviour of graphite oxide nanoplates embedded glass fiber/epoxy composites: Emphasizing the role of temperature and stress. Composites Part A: Applied Science and Manufacturing 102:166–177. https://doi.org/10.1016/j.compositesa.2017.08.001
  27. Farsani RE, Khalili SMR, Daghighi V, Fazaeli R (2011) Creep behavior of basalt and glass fiber reinforced epoxy composites. Journal of Mechanical Research and Application 3:29–36.
  28. Godara A, Raabe D (2007) Influence of fiber orientation on global mechanical behavior and mesoscale strain localization in a short glass-fiber-reinforced epoxy polymer composite during tensile deformation investigated using digital image correlation. Composites Science and Technology 67:2417–2427. https://doi.org/10.1016/j.compscitech.2007.01.005
  29. Negawo TA, Polat Y, Akgul Y, Kilic A, Jawaid M (2021) Mechanical and dynamic mechanical thermal properties of ensete fiber/woven glass fiber fabric hybrid composites. Composite Structures 259:113221. https://doi.org/10.1016/j.compstruct.2020.113221
  30. Natarajan S, Thamba NB, Nandi S, Kavitha KVN, Ayyagari S (2021) Effect of fiber orientation on the tensile and flexural properties of vetiver fiber reinforced epoxy composites. IOP Conference Series: Materials Science and Engineering 1123(1):012048. https://doi.org/10.1088/1757-899X/1123/1/012048
  31. Qin R, Li Y, Wong SY, Teo FY, Yu Z, Sun L, Zheng Y (2024) Understanding on the creep behavior of fiber reinforced polymer via fiber/matrix interaction. Construction and Building Materials 451:138875. https://doi.org/10.1016/j.conbuildmat.2024.138875
  32. Hadid M, Rechak S, Tati A (2004) Long-term bending creep behavior prediction of injection molded composite using stress–time correspondence principle. Materials Science and Engineering: A, 385(1–2):54–58. https://doi.org/10.1016/j.msea.2004.04.006