KaydedilenlerDerginizi ekleyin

Dergiler / Dicle Dental Journal / 2026 / Volume: 26 Issue: 1

Improving PMMA in prosthodontics: a literature review

Nuran Yanıkoğlu(ataturk universite)0000-0001-7677-1248
Osayd Alawawda(ATATÜRK ÜNİVERSİTESİ, DİŞ HEKİMLİĞİ FAKÜLTESİ, DİŞ HEKİMLİĞİ PR.)0009-0008-3954-6373
Sayfa
—
Yayın Tarihi
2025-03-28
DOI
—
🏛️Bu makalenin bibliyografik verileri ve tam metin bağlantısı DergiPark üzerinden sağlanmıştır.
DergiPark Kaydı ↗
✨

Yapay Zeka Hızlı Bakış & Çıkarımlar

AI Insight
⚡ TL;DR(1 Cümlede Hızlı Çıkarım)

The aim of this review is to explore the advancements in reinforcing PMMA (polymethyl methacrylate) for dental prosthetics by analyzing various modifications.

📌 3 Maddede Bu Makale

🎯
Amaç & Hipotez:Since its introduction in the 1930s, PMMA has been the primary denture base material in use.
📊
Temel Bulgular & Veri:The latest developments involve the insertion of silver, zirconium oxide (ZrO2), and titanium dioxide (TiO2) nanoparticles, which are said to increase the mechanical characteristics even further, such as flexural strength, hardness, and wear resistance.
💡
Sonuç & Katkı:The aim of this review is to explore the advancements in reinforcing PMMA (polymethyl methacrylate) for dental prosthetics by analyzing various modifications.
🔬Tür:Literatür & Derleme Çalışması
📍Kapsam:Genişletilmiş Akademik Örneklem
⚙️Değişkenler:Polymethyl methacrylate · PMMA · nanoparticle reinforcement

Abstract

Since its introduction in the 1930s, PMMA has been the primary denture base material in use. This is due to the fact that PMMA is affordable, visually pleasing, and medically compatible. Nonetheless, PMMA’s intrinsic flaws-primarily its poor flexural strength and impact resistance-make it imperative to look for solutions to address these two crucial deficiencies. The latest developments involve the insertion of silver, zirconium oxide (ZrO2), and titanium dioxide (TiO2) nanoparticles, which are said to increase the mechanical characteristics even further, such as flexural strength, hardness, and wear resistance. To further increase the impact strength and durability of PMMA, fibers can be added to the material. These fibers can be synthetic (like polyester or carbon) or natural (like sisal or bamboo). Improvements in surface treatments and bonding methods have also strengthened PMMA’s binding and made it more compatible with other materials. Aging research demonstrates that reinforced PMMA is more resilient to environmental stress, making it a material of choice for long-term dental applications. Furthermore, the use of antimicrobial compounds and nanoparticles offers additional benefits, such as the presence of antifungal qualities that mitigate biofilm development and improve the overall biocompatibility of dental prostheses. These developments thus suggest that there is still a lot of promise for the modified PMMA in dental applications, both in terms of improving performance and extending its useful life in a clinical setting. The aim of this review is to explore the advancements in reinforcing PMMA (polymethyl methacrylate) for dental prosthetics by analyzing various modifications.

🔖

Bu Makaleye Atıf Yap

Yanıkoğlu, N., Alawawda, O. (2025). Improving PMMA in prosthodontics: a literature review. Dicle Dental Journal, Volume: 26 Issue: 1. https://ajindex.com/articles/1643262

📄 Tam Metin PDF Okuyucu

📄

PDF görüntüleyici hazırlanıyor...

Kaynakça (62)

  1. Apimanchindakul C, Na Nan P, Aimjirakul N. Effect of reinforced self-cured acrylic resin on flexural strength. Int J Dent. 2022;2022:2698995. doi:10.1155/2022/2698995
  2. Altarazi A, Haider J, Alhotan A, Silikas N, Devlin H. 3D printed denture base material: the effect of incorporating TiO2 nanoparticles and artificial ageing on the physical and mechanical properties. Dent Mater. 2023;39(12):1122-1136. doi:10.1016/j.dental.2023.10.005
  3. Gad MM, Rahoma A, Abualsaud R, et al. Influence of artificial aging and ZrO2 nanoparticle-reinforced repair resin on the denture repair strength. J Clin Exp Dent. 2020;12(4):e354-e362. doi:10.4317/jced.56610
  4. Sharhan HA, N.rasheed Z, Oleiwi JK. Effect of polypropylene (PP) and polyacrylonitrile (PAN) fibers reinforced acrylic resin on compression, hardness and surface-roughness for denture applications. Key Engineer Mater. 2022;911:9-16. doi:10.4028/p-197rys
  5. Anehosur GV, Kulkarni RD, Naik MG, Nadiger RK. Synthesis and determination of antimicrobial activity of visible light activated TiO2 nanoparticles with polymethyl methacrylate denture base resin against Staphylococcus aureus. J Gerontol Geriat Res. 2012;1(1):103-111.doi:10. 4172/jggr.1000103
  6. Sun J, Wang L, Wang J, et al. Characterization and evaluation of a novel silver nanoparticles-loaded polymethyl methacrylate denture base: in vitro and in vivo animal study. Dent Mater J. 2021;40(5):1100-1108. doi: 10.4012/dmj.2020-129
  7. Sati S, Bamola VD, Chaudhry R, Jit BP, Gupta M. Nanoparticles and inert coating materials: a potential enhancer of antimicrobial property of polymethyl-methacrylate (PMMA) based denture. J Dent Oral Epidemiol. 2023;3(2):1-12. doi:JDOE2200107
  8. Choubisa D. An overview of applications of nanotechnology in prosthodontics. J Prosthodont Dent. 2022;17,1-22.
  9. Köroğlu A, Şahin O, Kürkçüoğlu I, Dede DÖ, Özdemir T, Hazer B. Silver nanoparticle incorporation effect on mechanical and thermal properties of denture base acrylic resins. J Appl Oral Sci. 2016;24(6):590-596. doi:10.1590/1678-775720160185
  10. Altaie SF. Tribological, microhardness and color stability properties of a heat-cured acrylic resin denture base after reinforcement with different types of nanofiller particles. Dent Med Probl. 2023;60(2):295-302. doi: 10.17219/dmp/137611
  11. Barzegar A, Ghaffari T, Parizad A. Effect of incorporating aluminum oxide nanoparticles on thermal conduction and flexural strength of acrylic resins. Dent Res J (Isfahan). 2022;19:33.
  12. Machado-Santos L, Silikas N, Baroudi K, Sinhoreti MA, Brandt WC, Liporoni PC. Mechanical performance of experimental acrylic resins modified by nanoparticles after chemical and mechanical degradation. J Clin Exp Dent. 2020;12(12):e1157-e1163. doi:10.4317/jced.57265
  13. Elhmali HT, Stajcic I, Petrovic M, et al. Mechanical performance of denture acrylic resin modified with poly (4-styrenesulfonic acid-co-maleic anhydride) sodium salt and strontium titanate. Polym Compos. 2024;45(12):11404-11415. doi:10.1002/pc.28574
  14. Machado-Santos L, Baroudi K, Silikas N, et al. Physical analysis of an acrylic resin modified by metal and ceramic nanoparticles. Dent Med Probl. 2023;60(4):657-664. doi:10.17219/dmp/171844
  15. Barapatre D, Somkuwar S, Mishra SK, Chowdhary R. The effects of reinforcement with nanoparticles of polyetheretherketone, zirconium oxide and its mixture on flexural strength of PMMA resin. Eur Oral Res. 2022;56(2):61-66. doi:10.26650/eor.2022904564
  16. Karci M, Demir N, Yazman S. Evaluation of flexural strength of different denture base materials reinforced with different nanoparticles. J Prosthodont. 2019;28(5):572-579. doi:10.1111/jopr.12974
  17. Alzayyat ST, Almutiri GA, Aljandan JK, et al. Antifungal efficacy and physical properties of poly(methylmethacrylate) denture base material reinforced with SiO2 nanoparticles. J Prosthodont. 2021;30(6):500-508. doi:10.1111/jopr.13271
  18. Gad MMA, Abualsaud R, Al-Thobity AM, et al. Effect of SiO2 nanoparticles addition on the flexural strength of repaired acrylic denture base. Eur J Dent. 2020;14(1):19-23. doi:10.1055/s-0039-1701076
  19. Chen MH. Update on dental nanocomposites. J Dent Res. 2010;89(6):549-560. doi:10.1177/0022034510363765
  20. Kuşçu HYY. Utilization of nanomaterials in prosthetic dental treatment. HRU Int J Dent Oral Res. 2023;3(2):117-123. doi:10.61139/ijdor.1270852
  21. Santulli C. Nanostructured polymer composites for dental fillings. Nanostructured polymer composites for biomedical applications. Elsevier, 2019:277-293.
  22. Acosta-Torres LS, Lpez-Marín LM, Núñez-Anita RE, Hernández-Padrón G, Castaño VM. Biocompatible metal-oxide nanoparticles: nanotechnology improvement of conventional prosthetic acrylic resins. J Nanomater. 2011;2011(1):941561. doi:10.1155/2011/941561
  23. Bastos NA, Bitencourt SB, Martins EA, De Souza GM. Review of nano-technology applications in resin-based restorative materials. J Esthet Restor Dent. 2021;33(4):567-582. doi:10.1111/jerd.12699
  24. Surajarusarn B, Thaiwattananon S, Thanawan S, Mougin K, Amornsakchai T. Realising the potential of pineapple leaf fiber as green and high-performance reinforcement for natural rubber composite with liquid functionalized rubber. Fibers Polymers. 2021;22(9):2543-2551.
  25. Bittner CM, Oettel V. Fiber reinforced concrete with natural plant fibers investigations on the application of bamboo fibers in ultra-high performance concrete. Sustainability. 2022;14(19):12011. doi:10.3390/su 141912011
  26. Andrzejewski J, Szostak M. Preparation and characterization of the injection molded polymer composites based on natural/synthetic fiber reinforcement. Lecture Notes Mechanic Engineer. 2019:473-484.
  27. Alam MI, Maraz KM, Khan RA, Alam MI, Maraz KM, Khan RA. A review on the application of high-performance fiber-reinforced polymer composite materials. GSC Advanced Res Rev. 2022;10(2):20-36. doi:10. 30574/gscarr.2022.10.2.0036
  28. Benyamin B, Amurwaningsih M, Darwis WY. The sisal fiber (agave sisalana) alkalization effects on the impact strength of fiber reinforced acrylic resin. J Medali. 2022;4(3):25-33. doi:10.30659/medali.4.3.25-33
  29. Sharhan HA, Alraziqi ZNR, Oleiwi JK. Effect of polypropylene (PP) and polyacrylonitrile (PAN) fibers reinforced acrylic resin on compression, hardness and surface-roughness for denture applications. Key Engineer Mater. 2022;911:9-16. doi:10.4028/p-197rys
  30. Gonçalves NI, Münchow EA, Santos JD, et al. The role of polymeric nanofibers on the mechanical behavior of polymethyl methacrylate resin. J Mech Behav Biomed Mater. 2020;112:104072. doi:10.1016/j.jmbbm.2020.104072
  31. Ardakani ZH, Giti R, Dabiri S, Hosseini AH, Moayedi M. Flexural strength of polymethyl methacrylate reinforced with high-performance polymer and metal mesh. Dent Res J (Isfahan). 2021;18:30.
  32. Nayak K, Rahangdale TD, Shrivastava S, Newaskar PS, Mishra N, Noorani SM. Evaluation and comparison of mechanical properties of heat polymerized acrylic resin after reinforcement of different fibers in different patterns: an in vitro study. Cureus. 2023;15(5):e39564. doi:10. 7759/cureus.39564
  33. Hu C, Lin YQ, Yang YJ, et al. High-performance dental composites based on hierarchical reinforcements. J Dent Res. 2022;101(8):912-920. doi:10.1177/00220345221074909
  34. Vallittu PK. Fibre-reinforced composites (FRCs) as dental materials. Non Metall Biomater Tooth Repair Replacem. 2013:352-374.
  35. Kumar A, Tekriwal S, Rajkumar B, Gupta V, Rastogi R. A review on fibre reinforced composite resins. Ann Prosthodont Restorat Dent. 2016;2(4): 11-16.
  36. Klaiber D, Spintzyk S, Geis-Gerstorfer J, Klink A, Unkovskiy A, Huettig F. Bonding behavior of conventional PMMA towards industrial CAD/CAM PMMA and artificial resin teeth for complete denture manufacturing in a digital workflow. Materials (Basel). 2021;14(14):3822. doi:10.3390/ma14143822
  37. Gad MM, Rahoma A, Abualsaud R, et al. Impact of different surface treatments and repair material reinforcement on the flexural strength of repaired PMMA denture base material. Dent Mater J. 2020;39(3):471-482. doi:10.4012/dmj.2018-436
  38. Calderon Salazar P, Huybrechts L. PD otherwise will be pluriversal (or it won’t be). ACM Int Confer Proceed Series. 2020;1:107-115. doi:10.1145/ 3385010.3385027
  39. Schauperl Z, Ivanković L, Bauer L, Šolić S, Ivanković M. Effects of different surface treatments of woven glass fibers on mechanical properties of an acrylic denture base material. Int J Mol Sci. 2023;24(2):909. doi:10.3390/ijms24020909
  40. Taczała-Warga J, Sawicki J, Krasowski M, Sokołowski J. The effect of acrylic surface preparation on bonding denture teeth to cellulose fiber-reinforced denture base acrylic. J Funct Biomater. 2022;13(4):183. doi:10. 3390/jfb13040183
  41. Deb S, Muniswamy L, Thota G, et al. Impact of surface treatment with different repair acrylic resin on the flexural strength of denture base resin: an in vitro study. J Contemp Dent Pract. 2020;21(10):1137-1140.
  42. Chladek G, Adeeb S, Pakieła W, Coto NP. Effect of different surface treatments as methods of improving the mechanical properties after repairs of PMMA for dentures. Materials (Basel). 2024;17(13):3254. doi: 10.3390/ma17133254
  43. Ariyani S, Chairunnisa R. The effect of surface treatment and thermocycling on bond strength between silicon soft denture lining and acrylic resin denture base. J Pharmaceut Negat Res. 2023:2943-2952. doi: 10.47750/pnr.2023.14.03.369
  44. Karaokutan I, Ayvaz I. Effect of various surface treatments on relining bond strength of CAD-CAM denture base materials. J Prosthodont. 2024:1-7. doi:10.1111/jopr.13831
  45. Kowalski R, Kozak BM, Sobolewska E. Contemporary hybrid acrylic materials and modern thermoplastics in the manufacture of dental prostheses. Pomeranian J Life Sci. 2023;69(1):39-45. doi:10.21164/pomjlifesci. 904
  46. Hakala P, Orell O, Sarlin E, Pääkkönen E, Jutila L, Kanerva M. Durability of sandwich structures with a maximized natural raw material basis: comparison of expanded polystyrene, cellulose foam and polylactic acid subjected to UV-rain aging. Rakenteiden Mekaniikka. 2023;56(1):24-40. doi:10.23998/rm.120756
  47. Davies P, Le Gac PY, Le Gall M. Influence of sea water aging on the mechanical behaviour of acrylic matrix composites. Appl Comp Mater. 2017;24(1):97-111.
  48. Al-Jmmal AY, Mohammed NZ, Al-Kateb HM. The effect of aging on hardness of heat cured denture base resin modified with recycled acrylic resin. Clin Exp Dent Res. 2024;10(1):e828. doi:10.1002/cre2.828
  49. Rahaman Ali AAA, John J, Mani SA, El-Seedi HR. Effect of thermal cycling on flexural properties of microcrystalline cellulose-reinforced denture base acrylic resins. J Prosthodont. 2020;29(7):611-616. doi:10. 1111/jopr.13018
  50. Çakmak G, Donmez MB, Akay C, Abou-Ayash S, Schimmel M, Yilmaz B. Effect of thermal cycling on the flexural strength and hardness of new-generation denture base materials. J Prosthodont. 2023;32(S1):81-86. doi:10.1111/jopr.13615
  51. Kondratiev A, Kochanov V, Yuresko T, Tsaritsynskyi A, Nabokina T. Durability of acrylic products during heat aging. Solid State Phenomena. 2022;334:145-153. doi:10.4028/p-8qo1zu
  52. Paglia CS, Krattiger A. The dimensional stability and durability of acrylic resins for the injection of cementitious systems. Eur J Formal Sci Engineer. 2020;4(2):124-129.
  53. White CC, Tan KT, Hunston DL, Forster AM, Jacobs DS. Impact of environmental factors on polymeric films used in protective glazing systems. Serv Life Predict. 2015:231-249. doi:10.1007/978-3-319-06034-7-1
  54. Jang EJ, Hong YJ, Jeong YH, et al. In vitro antifungal and physicochemical properties of polymerized acrylic resin containing strontium-modified phosphate-based glass. BMC Oral Health. 2024;24(1):775. doi:10.1186/s12903-024-04547-5
  55. AlEraky DM, Abuohashish HM, Gad MM, et al. The antifungal and antibiofilm activities of caffeine against candida albicans on polymethyl methacrylate denture base material. Biomedicines. 2022;10(9):2078. doi: 10.3390/biomedicines10092078
  56. Kachoei M, Divband B, Rahbar M, Esmaeilzadeh M, Ghanizadeh M, Alam M. A novel developed bioactive composite resin containing silver/zinc oxide (Ag/ZnO) nanoparticles as an antimicrobial material against Streptococcus mutans, Lactobacillus, and Candida albicans. Evid Based Complement Alternat Med. 2021;2021:4743411. doi:10.1155/ 2021/4743411
  57. Robu A, Antoniac A, Grosu E, et al. Additives imparting antimicrobial properties to acrylic bone cements. Materials (Basel). 2021;14(22):7031. doi:10.3390/ma14227031
  58. Menikheim S, Leckron J, Duffy M, et al. Biocompatible nanocapsules for self-healing dental resins and bone cements. ACS Omega. 2022;7(36): 31726-31735. doi:10.1021/acsomega.2c02080
  59. Yan HY, Yang HY, Huang C. Advances of self-healing dental composite resin. Chinese J Stomatol. 2017;52(9):582-584. doi:10.3760/cma.j.issn. 1002-0098.2017.09.016
  60. Fugolin AP, Pfeifer CS. Strategies to design extrinsic stimuli-responsive dental polymers capable of autorepairing. JADA Found Sci. 2022;1: 100013. doi:10.1016/j.jfscie.2022.100013
  61. Ilyaei S, Sourki R, Haji Y, Akbari A. Capsule-based healing systems in composite materials: a review. Critic Rev Solid State Mater Sci. 2020; 2021(6):491-531. doi:10.1080/10408436.2020.1852912
  62. Harb SV, Trentin A, de Souza TAC, et al. Effective corrosion protection by eco-friendly self-healing PMMA-cerium oxide coatings. Chemic Engineer J. 2020;383:123219. doi:10.1016/j.cej.2019.123219