KaydedilenlerDerginizi ekleyin

Dergiler / Sakarya University Journal of Science / 2018 / Volume: 22 Issue: 6

Structural and Physical Properties of the PbS Films Obtained by Chemical Bath Deposition at Different Deposition Temperature

Ayça Kıyak Yıldırım(Bilecik Şeyh Edebali University)0000-0002-8339-947X
Barış Altıokka(Bilecik Şeyh Edebali University)0000-0001-8891-973X
Sayfa
—
Yayın Tarihi
2018-12-01
🏛️Bu makalenin bibliyografik verileri ve tam metin bağlantısı DergiPark üzerinden sağlanmıştır.
DergiPark Kaydı ↗
✨

Yapay Zeka Hızlı Bakış & Çıkarımlar

AI Insight
⚡ TL;DR(1 Cümlede Hızlı Çıkarım)

Consequently, the film obtained at 25 ̊C exhibited a surface morphology with less and smaller pinholes, compared to others deposited at higher deposition temperatures .

📌 3 Maddede Bu Makale

🎯
Amaç & Hipotez:In the present study, structural and physical properties of the PbS thin films produced using chemical bath deposition method were investigated .
📊
Temel Bulgular & Veri:Deposition temperature was varied between 25 °C and 50 °C throughout the deposition period.
💡
Sonuç & Katkı:Consequently, the film obtained at 25 ̊C exhibited a surface morphology with less and smaller pinholes, compared to others deposited at higher deposition temperatures .
🔬Tür:Research Article
📍Kapsam:Genişletilmiş Akademik Örneklem
⚙️Değişkenler:Chemical bath deposition · Thin film · Lead nitrate

Abstract

In the present study, structural and physical properties of the PbS thin films produced using chemical bath deposition method were investigated . Deposition temperature was varied between 25 °C and 50 °C throughout the deposition period. The pH value of electrolyte solution and the deposition time of the films were 10.5 and 25 min, respectively . Characterizations of the PbS thin films were performed using scanning electron microscopy (SEM) and X-ray diffraction (XRD) methods. XRD results showed that all PbS thin films had a cubic structure irrespective of deposition temperature . Morphological characterizations of the films indicated that not only the number but also the size of pinholes, formed on the film surfaces, were significantly affected by the deposition temperature . Consequently, the film obtained at 25 ̊C exhibited a surface morphology with less and smaller pinholes, compared to others deposited at higher deposition temperatures .

🔖

Bu Makaleye Atıf Yap

Yıldırım, A. K., Altıokka, B. (2018). Structural and Physical Properties of the PbS Films Obtained by Chemical Bath Deposition at Different Deposition Temperature. Sakarya University Journal of Science, Volume: 22 Issue: 6. https://doi.org/10.16984/saufenbilder.409328

📄 Tam Metin PDF Okuyucu

📄

PDF görüntüleyici hazırlanıyor...

Kaynakça (15)

  1. Referans 1 Naresh B. Kotadiya, Anjana J. Kothari,Devendra Tiwari, and Tapas K. Chaudhuri, “Photoconductingnanocrystalline lead sulphide thin films obtained by chemical bath deposition,” Applied Physics A Materials Science & Processing, vol. 108, pp. 819–824, 2000.
  2. Referans 2 A.S. Obaid, M.A. Mahdi, Z. Hassan,and M. Bououdina, “PbS nanocrystal solar cells fabricated using microwave-assisted chemical bath deposition,” International Journal of Hydrogen Energy’', vol. 38, pp. 807–815,2013.
  3. Referans 3 A. N. Fouda, M. Marzook, H. M.AbdEl-Khalek, S. Ahmed, E. A. Eid, and A. B.El Basaty,“Structural and Optical Characterization of Chemically Deposited PbS Thin Films, ”Springer Science+Business Media Dordrecht Silicon vol. 9, pp. 809-816, 2017.
  4. Referans 4 Alex P. Gaiduk, Peter I. Gaiduk, and Arne Nylandsted Larsen, “Chemical bath deposition of PbS nanocrystals: Effect of substrate,” Thin Solid Films, vol. 516 pp. 3791–3795, 2008.
  5. Referans 5 H. Soetedjo, B. Siswanto, I. Azizand S. Sudjatmoko, “Low Resistivity Of Cu And Fe Doped Pbs Thin Films Prepared Using DC Sputtering Techniqueh,” Journal of Non-Oxide Glasses,vol. 9, No 2, p. 55 – 63, 2017.
  6. Referans 6 E. Pentia, L. Pintilie, T. Botila, I. Pintilie,A. Chaparro, and C. Maffiotte, “Bi influence on growth and physical properties of chemical deposited PbS films,” Thin Solid Films, vol. 434, pp. 162–170, 2003.
  7. Referans 7 J. P., Nair, R., Jayakrishnan, C. B. Nandu, and R. KPandley, “''In situ Sb-doped CdTe Films,” Semicond. Science and Technology, vol. 13, no. 3, pp. 340, 1998.
  8. Referans 8 S. B., Park, S. W., Moon, and I. S. Woo, ''Preparation and characterization of lead zirconate titanate thin flims,'' Thin Solid Films,vol.339, pp. 77, 81,2000.
  9. Referans 9 P. K., Manoj,, K. G., Gopchandran, P.,Koshy, V. K., Vaidyan, and Josephc, B., ''Growth and characterization of indium oxide thin films prepared by spray pyrolysis,'' Optical Materials,Vol. 28, No. 12, pp. 1405-1411.
  10. Referans 10 M., Saleem, Fang, L., Liang,A., Wakeel, M., Rashad, ve C. Y. Kong, ''Simple preparation and characterization of nano-crystalline zinc oxide thin films by sol-gel method on glass substrate,'' World Journal of Condensed Matter Physics, No. 2, pp.10-15, 2012.
  11. Referans 11 Cullity B.D., “ X-Işınlarının Difaksiyonu”, Çeviren; Sümer A., İTÜ Fizik Profesörü, İstanbul Teknik Üniversite Matbaası Gümüşsuyu, 1966.
  12. Referans 12 A. Hussain, A.Begum, and A. Rahman ‘‘Characterization of Nanocrystalline Lead Sulphide Thin Films Prepared by Chemical Bath Deposition Technique’, Arabian Journal for Science and Engineering, Vol. 38 No. 1, pp.169–174, 2013.
  13. Referans 13 S. Rajathi, K. Kirubavathi, and K Selvaraju ‘‘Structural, morphological, optical, and photoluminescence properties of nanocrystalline PbS thin films grown bychemical bath deposition’, Arabian Journal of Chemistry, 2015
  14. Referans 2 A.S. Obaid, M.A. Mahdi, Z. Hassan,and M. Bououdina, “PbS nanocrystal solar cells fabricated using microwave-assisted chemical bath deposition,” International Journal of Hydrogen Energy’', vol. 38, pp. 807–815,2013.
  15. Referans 9 P. K., Manoj,, K. G., Gopchandran, P.,Koshy, V. K., Vaidyan, and Josephc, B., ''Growth and characterization of indium oxide thin films prepared by spray pyrolysis,'' Optical Materials,Vol. 28, No. 12, pp. 1405-1411.