KaydedilenlerDerginizi ekleyin

Dergiler / NanoEra / 2025 / Volume: 5 Issue: 2

Numerical evaluation of nano-encapsulated PCM slurry as the heat transfer nanofluid

Muhammet Kaan Yeşilyurt(ATATURK UNIVERSITY)0000-0002-7207-1743
Dergi
NanoEra
Sayfa
—
Yayın Tarihi
2025-12-31
DOI
—
🏛️Bu makalenin bibliyografik verileri ve tam metin bağlantısı DergiPark üzerinden sağlanmıştır.
DergiPark Kaydı ↗
✨

Yapay Zeka Hızlı Bakış & Çıkarımlar

AI Insight
⚡ TL;DR(1 Cümlede Hızlı Çıkarım)

In this context, it was concluded that water-ePCM slurry with 2% ePCM added offers high heat storage capacity with low pumping power requirements, and therefore can be considered an efficient and sustainable heat transfer fluid for PVT systems.

📌 3 Maddede Bu Makale

🎯
Amaç & Hipotez:This study investigates the flow and heat transfer properties of a water-based heat transfer fluid (ePCM-S) containing nano-encapsulated paraffin-based MF/LA (ePCM) using computational fluid dynamics (CFD) to improve cooling performance in thermal systems.
📊
Temel Bulgular & Veri:The study compares the thermohydraulic behavior of pure water and 2% ePCM-S fluids at a constant heat flux of 850 W/m² and an inlet velocity of 0.012 m/s.
💡
Sonuç & Katkı:In this context, it was concluded that water-ePCM slurry with 2% ePCM added offers high heat storage capacity with low pumping power requirements, and therefore can be considered an efficient and sustainable heat transfer fluid for PVT systems.
🔬Tür:Modelleme & Sayısal Simülasyon
📍Kapsam:Genişletilmiş Akademik Örneklem
⚙️Değişkenler:ePCM slurry · heat transfer fuid · uniform cooling

Abstract

This study investigates the flow and heat transfer properties of a water-based heat transfer fluid (ePCM-S) containing nano-encapsulated paraffin-based MF/LA (ePCM) using computational fluid dynamics (CFD) to improve cooling performance in thermal systems. The study compares the thermohydraulic behavior of pure water and 2% ePCM-S fluids at a constant heat flux of 850 W/m² and an inlet velocity of 0.012 m/s. The geometric model consists of a flat-channel serpentine absorber plate operating in the laminar regime. Fluid properties are modeled with temperature-dependent expressions for density, viscosity, thermal conductivity, and specific heat capacity. Phase change effects are integrated into the energy equations using user-defined functions (UDFs). The results show that the ePCM additive significantly improves the fluid's temperature distribution, reduces the maximum surface temperature compared to pure water, and increases the average Nusselt number. Although pressure drop increased due to increased viscosity, ePCM-S increased overall energy efficiency with a thermal enhancement factor (TEF > 1). In this context, it was concluded that water-ePCM slurry with 2% ePCM added offers high heat storage capacity with low pumping power requirements, and therefore can be considered an efficient and sustainable heat transfer fluid for PVT systems.

🔖

Bu Makaleye Atıf Yap

Yeşilyurt, M. K. (2025). Numerical evaluation of nano-encapsulated PCM slurry as the heat transfer nanofluid. NanoEra, Volume: 5 Issue: 2. https://ajindex.com/articles/1627651

📄 Tam Metin PDF Okuyucu

📄

PDF görüntüleyici hazırlanıyor...

Kaynakça (48)

  1. Öner İV, Yeşilyurt MK, Yılmaz EÇ, Ömeroğlu G. Photovoltaic Thermal (PVT) Solar Panels. Int J New Technol Res. 2016;2(12):13-16. https://www.ijntr.org/vol-2issue-1265
  2. Ahmed MA, Alabdaly IK, Hatem SM, Hussein MM. Numerical Investigation on Heat Transfer Enhancement in Serpentine Mini-Channel Heat Sink. Int J Heat Technol. 2024;42(1):183-190. doi:10.18280/ijht.420119
  3. Al-Waeli AHA, Chaichan MT, Kazem HA, Sopian K. Evaluation and analysis of nanofluid and surfactant impact on photovoltaic-thermal systems. Case Stud Therm Eng. 2019;13:100392. doi:10.1016/j.csite.2019.100392
  4. Al-Waeli AHA, Chaichan MT, Sopian K, Kazem HA. Influence of the base fluid on the thermo-physical properties of PV/T nanofluids with surfactant. Case Stud Therm Eng. 2019;13:100340. doi:10.1016/j.csite.2018.10.001
  5. Regin AF, Solanki SC, Saini JS. Heat transfer characteristics of thermal energy storage system using PCM capsules: A review. Renew Sustain Energy Rev. 2008;12(9):2438-2458. doi:10.1016/j.rser.2007.06.009
  6. Sharma A, Tyagi VV, Chen CR, Buddhi D. Review on thermal energy storage with phase change materials and applications. Renew Sustain Energy Rev. 2009;13(2):318-345. doi:10.1016/j.rser.2007.10.005
  7. Browne MC, Norton B, McCormack SJ. Heat retention of a photovoltaic/thermal collector with PCM. Sol Energy. 2016;133:533-548. doi:10.1016/j.solener.2016.04.024
  8. Farid MM, Khudhair AM, Razack SAK, Al-Hallaj S. A review on phase change energy storage: materials and applications. Energy Convers Manag. 2004;45(9-10):1597-1615. doi:10.1016/j.enconman.2003.09.015
  9. Jegadheeswaran S, Pohekar SD. Performance enhancement in latent heat thermal storage system: A review. Renew Sustain Energy Rev. 2009;13(9):2225-2244. doi:10.1016/j.rser.2009.06.024
  10. Alvarado JL, Marsh C, Thies C, Soriano G, Garg P. Characterization of Thermal Properties and Heat Transfer Behavior of Microencapsulated Phase Change Material Slurry and Multiwall Carbon Nanotubes in Aqueous Suspension. In: Volume 8: Heat Transfer, Fluid Flows, and Thermal Systems, Parts A and B. ASMEDC; 2007:1771-1777. doi:10.1115/IMECE2007-41954
  11. Nadaroglu H, Yeşilyurt MK, Çomakli Ö. Micro-/Nano-Encapsulation and Encapsulation Applications. In: Ahmed W, Nourafkan E, eds. Science and Applications of Nanoparticles. Jenny Stanford Publishing Pte. Ltd; 2022:55-102. 12. Alvarado JL, Marsh C, Sohn C, Phetteplace G, Newell T. Thermal performance of microencapsulated phase change material slurry in turbulent flow under constant heat flux. Int J Heat Mass Transf. 2007;50(9-10):1938-1952. doi:10.1016/j.ijheatmasstransfer.2006.09.026
  12. Yeşilyurt MK, Nadaroglu H, Çomaklı Ö. Materials and Selection Thereof for Encapsulated Phase Change Materials for Heat Transfer Applications. Int J Innov Res Rev. 2019;3(2):16-22. https://dergipark.org.tr/en/pub/injirr/article/699546
  13. Dutil Y, Rousse DR, Salah N Ben, Lassue S, Zalewski L. A review on phase-change materials: Mathematical modeling and simulations. Renew Sustain Energy Rev. 2011;15(1):112-130. doi:10.1016/j.rser.2010.06.011
  14. Al-Waeli AHA, Chaichan MT, Sopian K, Kazem HA, Mahood HB, Khadom AA. Modeling and experimental validation of a PVT system using nanofluid coolant and nano-PCM. Sol Energy. 2019;177:178-191. doi:10.1016/j.solener.2018.11.016
  15. Chamarthy P, Utturkar Y. Theoretical Evaluation and Experimental Investigation of Microencapsulated Phase Change Materials (MPCM) in Electronics Cooling Applications. In: 5th Annual IEEE Semiconductor Thermal Measurement and Management Symposium. 2009:239-245. https://ieeexplore.ieee.org/abstract/document/4810770/
  16. Trivedi GVN, Parameshwaran R. Microencapsulated phase change material suspensions for cool thermal energy storage. Mater Chem Phys. 2020;242:122519. doi:10.1016/j.matchemphys.2019.122519
  17. Alva G, Lin Y, Liu L, Fang G. Synthesis, characterization and applications of microencapsulated phase change materials in thermal energy storage: A review. Energy Build. 2017;144:276-294. doi:10.1016/j.enbuild.2017.03.063
  18. Cao VD, Salas-Bringas C, Barfod Schüller R, Szczotok AM, Kjøniksen AL. Time-dependent structural breakdown of microencapsulated phase change materials suspensions. J Dispers Sci Technol. 2019;40(2):179-185. doi:10.1080/01932691.2018.1462194
  19. Zhang XX, Fan YF, Tao XM, Yick KL. Crystallization and prevention of supercooling of microencapsulated n-alkanes. J Colloid Interface Sci. 2005;281(2):299-306. doi:10.1016/j.jcis.2004.08.046
  20. Bayés-García L, Ventolà L, Cordobilla R, Benages R, Calvet T, Cuevas-Diarte MA. Phase Change Materials (PCM) microcapsules with different shell compositions: Preparation, characterization and thermal stability. Sol Energy Mater Sol Cells. 2010;94(7):1235-1240. doi:10.1016/j.solmat.2010.03.014
  21. Al-Waeli AHA, Sopian K, Chaichan MT, et al. Evaluation of the nanofluid and nano-PCM based photovoltaic thermal (PVT) system: An experimental study. Energy Convers Manag. 2017;151:693-708. doi:10.1016/j.enconman.2017.09.032
  22. Al-Mamoori A. Thermal Characteristics of Phase Change Material Used as Thermal Storage System by Using Solar Energy. Turkish Aeronautical Association University; 2017.
  23. Acar S. Faz Değiştirici Maddeler ve Uygulamaları. Firat University; 2014.
  24. Junfeng Su, Wang L, Ren L. Fabrication and thermal properties of microPCMs: Used melamine‐formaldehyde resin as shell material. J Appl Polym Sci. 2006;101(3):1522-1528. doi:10.1002/app.23151
  25. Sarı A, Alkan C, Karaipekli A, Uzun O. Microencapsulated n-octacosane as phase change material for thermal energy storage. Sol Energy. 2009;83(10):1757-1763. doi:10.1016/j.solener.2009.05.008
  26. Salaün F, Devaux E, Bourbigot S, Rumeau P. Material Containing Microcapsules, In Particular Phase-Changing Materials. Published online 2009.
  27. Zhang XX, Tao XM, Yick KL, Wang XC. Structure and thermal stability of microencapsulated phase-change materials. Colloid Polym Sci. 2004;282(4):330-336. doi:10.1007/s00396-003-0925-y
  28. Yamagishi Y, Takeuchi H, Pyatenko AT, Kayukawa N. Characteristics of microencapsulated PCM slurry as a heat‐transfer fluid. AIChE J. 1999;45(4):696-707. doi:10.1002/aic.690450405
  29. Browne MC, Norton B, McCormack SJ. Phase change materials for photovoltaic thermal management. Renew Sustain Energy Rev. 2015;47:762-782. doi:10.1016/j.rser.2015.03.050
  30. Etaig S. Investigation of the Enhancement of Convective Heat Transfer for Wallbounded Flows Utilizing Nanofluids. Northumbria University; 2017.
  31. Su Z, Li Z, Zeng C, et al. Simulation on flow and heat transfer characteristics of microencapsulated phase change material slurry by modified discrete phase model. Appl Therm Eng. 2024;256:124131. doi:10.1016/j.applthermaleng.2024.124131
  32. Zaw MM, Zhu L, Ma R. Numerical Study of Heat Transfer Enhancement Using Nano-Encapsulated Phase Change (NPC) Slurries in Wavy Microchannels. Fluids. 2024;9(10):236. doi:10.3390/fluids9100236
  33. Allouche Y. PCM Energy Storage Modeling: Case Study For A Solar-Ejector Cooling Cycle. University of Porto; 2016. https://www.proquest.com/docview/2378760559?pq-origsite=gscholar&fromopenview=true&sourcetype=Dissertations & Theses
  34. Alquaity ABS, Al-Dini SA, Wang EN, Yilbas BS. Numerical investigation of liquid flow with phase change nanoparticles in microchannels. Int J Heat Fluid Flow. 2012;38:159-167. doi:10.1016/j.ijheatfluidflow.2012.10.001
  35. Languri EM, Shaaban AH, Kong M, Alvarado JL. Numerical Simulation of a Microencapsulated Phase Change Material Slurry Flowing in a Helical Coil Heat Exchanger. In: Volume 8B: Heat Transfer and Thermal Engineering. American Society of Mechanical Engineers; 2013. doi:10.1115/IMECE2013-63509
  36. Al-Maghalseh M. Compact Solar Thermal Energy Storage Systems Using Phase Change Materials. Northumbria University; 2014.
  37. Chen Z, Fang G. Preparation and heat transfer characteristics of microencapsulated phase change material slurry: A review. Renew Sustain Energy Rev. 2011;15(9):4624-4632. doi:10.1016/j.rser.2011.07.090
  38. Chai L, Shaukat R, Wang L, Wang HS. A review on heat transfer and hydrodynamic characteristics of nano/microencapsulated phase change slurry (N/MPCS) in mini/microchannel heat sinks. Appl Therm Eng. 2018;135:334-349. doi:10.1016/j.applthermaleng.2018.02.068
  39. Zeng R, Wang X, Chen B, et al. Heat transfer characteristics of microencapsulated phase change material slurry in laminar flow under constant heat flux. Appl Energy. 2009;86(12):2661-2670. doi:10.1016/j.apenergy.2009.04.025
  40. Chen S, Qiu Z, Liu F, Xing J. Review of Laminar Convection Heat-Transfer with Microencapsulated Phase Change Material Slurry. In: First International Conference on Information Sciences, Machinery, Materials and Energy. 2015:1798-1801. doi:10.2991/icismme-15.2015.368
  41. Yang L, Liu S, Zheng H. A comprehensive review of hydrodynamic mechanisms and heat transfer characteristics for microencapsulated phase change slurry (MPCS) in circular tube. Renew Sustain Energy Rev. 2019;114:109312. doi:10.1016/j.rser.2019.109312
  42. Thomas DG. Transport characteristics of suspension: VIII. A note on the viscosity of Newtonian suspensions of uniform spherical particles. J Colloid Sci. 1965;20(3):267-277. doi:10.1016/0095-8522(65)90016-4
  43. Zhang G, Cui G, Dou B, Wang Z, Goula MA. An experimental investigation of forced convection heat transfer with novel microencapsulated phase change material slurries in a circular tube under constant heat flux. Energy Convers Manag. 2018;171:699-709. doi:10.1016/j.enconman.2018.06.029
  44. Wang X, Niu J, Li Y, et al. Flow and heat transfer behaviors of phase change material slurries in a horizontal circular tube. Int J Heat Mass Transf. 2007;50(13-14):2480-2491. doi:10.1016/j.ijheatmasstransfer.2006.12.024
  45. Doshi S, Kashyap G, Tiwari N. Thermo-hydraulic and entropy generation investigation of nano-encapsulated phase change material (NEPCM) slurry in hybrid wavy microchannel. Int J Numer Methods Heat Fluid Flow. 2022;32(10):3161-3190. doi:10.1108/HFF-06-2021-0422
  46. Qiu Z, Li P, Wang Z, Zhao H, Zhao X. PCM and PCM Slurries and Their Application in Solar Systems. In: Advanced Energy Efficiency Technologies for Solar Heating, Cooling and Power Generation. Springer, Cham; 2019:101-141. doi:10.1007/978-3-030-17283-1_4
  47. Corcione M. Empirical correlating equations for predicting the effective thermal conductivity and dynamic viscosity of nanofluids. Energy Convers Manag. 2011;52(1):789-793. doi:10.1016/j.enconman.2010.06.072
  48. Shah RK, London AL. Laminar Flow Forced Convection in Ducts: A Source Book for Compact Heat Exchanger Analytical Data. Academic Press Inc.; 1978.