Yapay Zeka Hızlı Bakış & Çıkarımlar
AI InsightR123 ve R245fa akışkanları için COP değerleri sırasıyla 4.24 ve 4.14 olarak hesaplanmıştır.
📌 3 Maddede Bu Makale
Özet
Endüstriyel tesislerde açığa çıkan atık ısının geri kazanılması, enerji verimliliğinin artırılması ve çevresel etkilerin azaltılması açısından büyük önem taşımaktadır. Bu çalışmada, endüstriyel bir tesiste oluşan düşük sıcaklıktaki atık ısının kaynak olarak kullanıldığı tek kademeli buhar sıkıştırmalı bir ısı pompası sisteminin teorik analizi gerçekleştirilmiştir. Sistem, bir fabrikanın idari birimlerinin 55–58 °C sıcak su ile ısıtılması amacıyla modellenmiş ve 30 °C atık ısı kaynağı için simüle edilmiştir. Sistem bileşenleri için kütle, enerji ve ekserji denklikleri yazılmış ve farklı evaporatör ve kondenser sıcaklıkları için sistem performansı enerji ve ekserji analizi yöntemleri kullanılarak değerlendirilmiştir. Ayrıca R1234ze(Z), R245fa, R1233zd(E) ve R123 soğutucu akışkanlarının termodinamik ve ekserji performansları çevresel ve güvenlik özellikleri dikkate alınarak karşılaştırılmıştır. Sonuçlara göre en yüksek COP değeri 4.52 ile R1234ze(Z) akışkanı için elde edilmiş, bunu 4.48 COP değeri ile R1233zd(E) takip etmiştir. R123 ve R245fa akışkanları için COP değerleri sırasıyla 4.24 ve 4.14 olarak hesaplanmıştır.
Abstract
Waste heat recovery in industrial facilities is of great importance for improving energy efficiency and reducing environmental impacts. In this study, a theoretical analysis of a single-stage vapor compression heat pump system using low-temperature industrial waste heat as the heat source was conducted. The system was modeled to provide hot water at 55–58 °C for heating the administrative units of a factory and was simulated for a 30 °C waste heat source. Mass, energy, and exergy balance equations were formulated for the system components, and the system performance was evaluated for different evaporator and condenser temperatures using energy and exergy analysis methods. Furthermore, the thermodynamic and exergy performances of R1234ze(Z), R245fa, R1233zd(E), and R123 refrigerants were compared by considering their environmental and safety characteristics. The results showed that the highest COP value of 4.52 was obtained for R1234ze(Z), followed by R1233zd(E) with a COP of 4.48. The COP values for R123 and R245fa were calculated as 4.24 and 4.14, respectively.