Dergiler / Natural and Engineering Sciences / 2026 / Volume: 10 Issue: 1

Synthesis of Phosphonated Solid Acid Catalyst from Water Hyacinth-Derived Carbon Dots and Its Catalytic Performance in 5-Hydroxymethylfurfural Production

Sayfa
—
Yayın Tarihi
2025-04-01
🏛️Bu makalenin bibliyografik verileri ve tam metin bağlantısı DergiPark üzerinden sağlanmıştır.
DergiPark Kaydı ↗
✨

Yapay Zeka Hızlı Bakış & Çıkarımlar

AI Insight
⚡ TL;DR(1 Cümlede Hızlı Çıkarım)

For using crude biomass in 5-HMF production this method offers a green and efficient approach.

📌 3 Maddede Bu Makale

🎯
Amaç & Hipotez:The most effective parameters for the synthesis of Carbon Dots (CDs) obtained from Water Hyacinth (WH) were found to be 125 ̊C, 35 minutes, and 7 g, with a maximum yield of 18.65%, according to the Design Expert 13.0 program.
📊
Temel Bulgular & Veri:The phosphonated solid acid catalyst (PCDs) was synthesized by functionalizing CDs with concentrated phosphoric acid (85%) at 150 ̊C for 6 hours and used as a catalyst for producing 5–hydroxymethylfurfural (5-HMF).
💡
Sonuç & Katkı:For using crude biomass in 5-HMF production this method offers a green and efficient approach.
🔬Tür:Research Article
📍Kapsam:Genişletilmiş Akademik Örneklem
⚙️Değişkenler:Water hyacinth · carbon dots · solid acid catalyst

Abstract

The most effective parameters for the synthesis of Carbon Dots (CDs) obtained from Water Hyacinth (WH) were found to be 125 ̊C, 35 minutes, and 7 g, with a maximum yield of 18.65%, according to the Design Expert 13.0 program. The phosphonated solid acid catalyst (PCDs) was synthesized by functionalizing CDs with concentrated phosphoric acid (85%) at 150 ̊C for 6 hours and used as a catalyst for producing 5–hydroxymethylfurfural (5-HMF). UV, XRD, SEM, FTIR, TGA elemental analysis, and acid–base titration techniques were used to characterize the CDs and catalyst. The FTIR spectra confirm the synthesized catalyst exhibited functional groups such as -PO3H2, -COOH, and -OH. The Catalytic Performance of PCDs was evaluated in the one-step Microwave-Assisted (MW) conversion of WH into 5-HMF using a biphasic solvent (isopropanol: water), achieving a 73.05% yield at 90 ̊C in 40 minutes using 0.6 g of catalyst. For using crude biomass in 5-HMF production this method offers a green and efficient approach.

🔖

Bu Makaleye Atıf Yap

Olango, N. T., Eranna, B. C., Hirpaye, B. Y. (2025). Synthesis of Phosphonated Solid Acid Catalyst from Water Hyacinth-Derived Carbon Dots and Its Catalytic Performance in 5-Hydroxymethylfurfural Production. Natural and Engineering Sciences, Volume: 10 Issue: 1. https://doi.org/10.28978/nesciences.1631074

📄 Tam Metin PDF Okuyucu

📄

PDF görüntüleyici hazırlanıyor...

Kaynakça (53)

  1. Agar, D. A., Svanberg, M., Lindh, I., & Athanassiadis, D. (2020). Surplus forest biomass–The cost of utilisation through optimised logistics and fuel upgrading in northern Sweden. Journal of cleaner production, 275, 123151. https://doi.org/10.1016/j.jclepro.2020.123151.
  2. Aslan, N. E. V. Z. A. T., & Cebeci, Y. A. K. U. P. (2007). Application of Box–Behnken design and response surface methodology for modeling of some Turkish coals. Fuel, 86(1-2), 90-97. https://doi.org/10.1016/j.fuel.2006.06.010
  3. Bhatia, S. K., Palai, A. K., Kumar, A., Bhatia, R. K., Patel, A. K., Thakur, V. K., & Yang, Y. H. (2021). Trends in renewable energy production employing biomass-based biochar. Bioresource Technology, 340. https://doi.org/10.1016/j.biortech.2021.125644.
  4. Bohre, A., Dutta, S., Saha, B., & Abu-Omar, M. M. (2015). Upgrading furfurals to drop-in biofuels: An overview. ACS Sustainable Chemistry & Engineering, 3(7), 1263-1277.
  5. Briscoe, J., Marinovic, A., Sevilla, M., Dunn, S., & Titirici, M. (2015). Biomass‐derived carbon quantum dot sensitizers for solid‐state nanostructured solar cells. Angewandte Chemie International Edition, 54(15), 4463-4468. https://doi.org/10.1002/anie.201409290
  6. Carlini, M., Castellucci, S., & Mennuni, A. (2018). Water hyacinth biomass: Chemical and thermal pre-treatment for energetic utilization in anaerobic digestion process. Energy Procedia, 148, 431-438. https://doi.org/10.1016/j.egypro.2018.08.106
  7. Chareonlimkun, A., Champreda, V., Shotipruk, A., & Laosiripojana, N. (2010). Catalytic conversion of sugarcane bagasse, rice husk and corncob in the presence of TiO2, ZrO2 and mixed-oxide TiO2–ZrO2 under hot compressed water (HCW) condition. Bioresource technology, 101(11), 4179-4186. https://doi.org/10.1016/j.biortech.2010.01.037
  8. Chi, C., Zhang, Z., Chang, H. M., & Jameel, H. (2009). Determination of furfural and hydroxymethylfurfural formed from biomass under acidic conditions. Journal of Wood Chemistry and Technology, 29(4), 265-276. https://doi.org/10.1080/02773810903096025
  9. da Luz Corrêa, A. P., Bastos, R. R. C., da Rocha Filho, G. N., Zamian, J. R., & da Conceição, L. R. V. (2020). Preparation of sulfonated carbon-based catalysts from murumuru kernel shell and their performance in the esterification reaction. RSC advances, 10(34), 20245-20256. https://doi.org/10.1039/D0RA03217D
  10. de Andrade, J. K., de Andrade, C. K., Komatsu, E., Perreault, H., Torres, Y. R., da Rosa, M. R., & Felsner, M. L. (2017). A validated fast difference spectrophotometric method for 5-hydroxymethyl-2-furfural (HMF) determination in corn syrups. Food chemistry, 228, 197-203. https://doi.org/10.1016/j.foodchem.2017.01.158
  11. de Medeiros, T. V., Manioudakis, J., Noun, F., Macairan, J. R., Victoria, F., & Naccache, R. (2019). Microwave-assisted synthesis of carbon dots and their applications. Journal of Materials Chemistry C, 7(24), 7175-7195.
  12. Deka, M. J., Dutta, P., Sarma, S., Medhi, O. K., Talukdar, N. C., & Chowdhury, D. (2019). Carbon dots derived from water hyacinth and their application as a sensor for pretilachlor. Heliyon, 5(6). https://doi.org/10.1016/j.heliyon.2019.e01985
  13. Dulie, N. W., Woldeyes, B., & Demsash, H. D. (2021). Synthesis of lignin-carbohydrate complex-based catalyst from Eragrostis tef straw and its catalytic performance in xylose dehydration to furfural. International Journal of Biological Macromolecules, 171, 10-16. https://doi.org/10.1016/j.ijbiomac.2020.12.213
  14. Ewnetu Sahlie, M., Zeleke, T. S., & Aklog Yihun, F. (2022). Water Hyacinth: A sustainable cellulose source for cellulose nanofiber production and application as recycled paper reinforcement. Journal of Polymer Research, 29(6), 230. https://doi.org/10.1007/s10965-022-03089-0
  15. Fan, G., Wang, Y., Hu, Z., Yan, J., Li, J., & Song, G. (2018). Synthesis of 5-hydroxymethyl furfural from cellulose via a two-step process in polar aprotic solvent. Carbohydrate polymers, 200, 529-535. https://doi.org/10.1016/j.carbpol.2018.08.043
  16. Fu, Z., Wan, H., Hu, X., Cui, Q., & Guan, G. (2012). Preparation and catalytic performance of a carbon-based solid acid catalyst with high specific surface area. Reaction Kinetics, Mechanisms and Catalysis, 107(1), 203-213. https://doi.org/10.1007/s11144-012-0466-9
  17. Gil Matellanes, M. V., Casal Banciella, M. D., Pevida García, C., Pis Martínez, J. J., & Rubiera González, F. (2010). Thermal behaviour and kinetics of coal/biomass blends during co-combustion. http://doi.org/10.1016/j.biortech.2010.02.008
  18. He, Q., Lu, Y., Peng, Q., Chen, W., Fan, G., Chai, B., & Song, G. (2021). Synthesis of 5-hydroxymethylfurfural from fructose catalyzed by sulfonated carbon-based solid acid. Biomass Conversion and Biorefinery, 1-9. https://doi.org/10.1007/s13399-021-01847-6
  19. Huang, L., Xie, C., Liu, J., Zhang, X., Chang, K., Kuo, J.,. & Evrendilek, F. (2018). Influence of catalysts on co-combustion of sewage sludge and water hyacinth blends as determined by TG-MS analysis. Bioresource technology, 247, 217-225. https://doi.org/10.1016/j.biortech.2017.09.039
  20. Issa, M. A., Abidin, Z. Z., Sobri, S., Abdul-Rashid, S., Mahdi, M. A., Ibrahim, N. A., & Pudza, M. Y. (2020). Fabrication, characterization and response surface method optimization for quantum efficiency of fluorescent nitrogen-doped carbon dots obtained from carboxymethylcellulose of oil palms empty fruit bunch. Chinese Journal of Chemical Engineering, 28(2), 584-592. https://doi.org/10.1016/j.cjche.2019.04.003
  21. Jamil, F., Ala'a, H., Naushad, M., Baawain, M., Al-Mamun, A., Saxena, S. K., & Viswanadham, N. (2020). Evaluation of synthesized green carbon catalyst from waste date pits for tertiary butylation of phenol. Arabian journal of chemistry, 13(1), 298-307. https://doi.org/10.1016/j.arabjc.2017.04.009
  22. Jori, P. K., & Jadhav, V. H. (2022). Highly Efficient Zirconium Based Carbonaceous Solid Acid Catalyst for Selective Synthesis of 5-HMF from Fructose and Glucose in Isopropanol as a Solvent. Catalysis Letters, 152(6), 1703-1710. https://doi.org/10.1007/s10562-021-03764-9
  23. Khatiri, K., Sheikh, A., Hesam, R., & Alikhani, N. (2019). The Role of Participation in Preventing the Water Crisis. International Academic Journal of Innovative Research, 6(1), 47–52. https://doi.org/10.9756/IAJIR/V6I1/1910004
  24. Li, M., Jiang, H., Zhang, L., Yu, X., Liu, H., Yagoub, A. E. A., & Zhou, C. (2020). Synthesis of 5-HMF from an ultrasound-ionic liquid pretreated sugarcane bagasse by using a microwave-solid acid/ionic liquid system. Industrial Crops and Products, 149, 112361. https://doi.org/10.1016/j.indcrop.2020.112361.
  25. Ma, X., Dong, Y., Sun, H., & Chen, N. (2017). Highly fluorescent carbon dots from peanut shells as potential probes for copper ion: The optimization and analysis of the synthetic process. Materials Today Chemistry, 5, 1-10. https://doi.org/10.1016/j.mtchem.2017.04.004
  26. Majdanishabestari, K., & Soleimani, M. (2019). Using simulation-optimization model in water resource management with consideration of environmental issues. International Academic Journal of Science and Engineering, 6(1), 15–25. https://doi.org/10.9756/IAJSE/V6I1/1910002
  27. Meng, W., Bai, X., Wang, B., Liu, Z., Lu, S., & Yang, B. (2019). Biomass‐derived carbon dots and their applications. Energy & Environmental Materials, 2(3), 172-192. https://doi.org/10.1002/eem2.12038
  28. Mies, M. J. M., Rebrov, E. V., Jansen, J. C., De Croon, M. H. J. M., & Schouten, J. C. (2007). Hydrothermal synthesis of a continuous zeolite Beta layer by optimization of time, temperature and heating rate of the precursor mixture. Microporous and mesoporous materials, 106(1-3), 95-106. https://doi.org/10.1016/j.micromeso.2007.02.032
  29. Mollazade, S. (2017). Optimal model of cultivation and water demand with environmental considerations in agricultural sector of Yasoouj plain. International Academic Journal of Economics, 4(1), 32–40.
  30. Nandini, G. K. (2024). IOT Use in a farming area to manage water conveyance. Archives for Technical Sciences/Arhiv za Tehnicke Nauke, (31). https://doi.org/10.70102/afts.2024.1631.016.
  31. Of, P., Acid, S., From, C., Husk, R., Of, I., Catalytic, I. T. S., & In, P. (2017). Preparation of Solid Acid Catalyst from Rice Husk and by Abel Aklilu A Thesis Submitted to The School of Chemical and Bio-Engineering Presented in Fulfilment of the Requirement for the Degree of Master of Science (Process Engineering) Addis Ababa Univer. October.
  32. Ozyilmaz, A. T. (2023). Conducting Polymer Films on Zn Deposited Carbon Electrode. Natural and Engineering Sciences, 8(2), 129-139. https://doi.org/10.28978/nesciences.1342013
  33. Park, S. Y., Lee, H. U., Park, E. S., Lee, S. C., Lee, J. W., Jeong, S. W.,. & Lee, J. (2014). Photoluminescent green carbon nanodots from food-waste-derived sources: large-scale synthesis, properties, and biomedical applications. ACS applied materials & interfaces, 6(5), 3365-3370.
  34. Peng, D., Qiao, S., Luo, Y., Ma, H., Zhang, L., Hou, S.,. & Xu, H. (2020). Performance of microbial induced carbonate precipitation for immobilizing Cd in water and soil. Journal of hazardous materials, 400, 123116. https://doi.org/10.1016/j.jhazmat.2020.123116
  35. Prathumsuwan, T., Jaiyong, P., In, I., & Paoprasert, P. (2019). Label-free carbon dots from water hyacinth leaves as a highly fluorescent probe for selective and sensitive detection of borax. Sensors and Actuators B: Chemical, 299, 126936. https://doi.org/10.1016/j.snb.2019.126936
  36. Raghu, A. V., Karuppanan, K. K., & Pullithadathil, B. (2019). Highly surface active phosphorus-doped onion-like carbon nanostructures: ultrasensitive, fully reversible, and portable NH3 gas sensors. ACS Applied Electronic Materials, 1(11), 2208-2219.
  37. Rana, A., Alghazal, M. S., Alsaeedi, M. M., S. Bakdash, R., Basheer, C., & Al-Saadi, A. A. (2019). Preparation and characterization of biomass carbon–based solid acid catalysts for the esterification of marine algae for biodiesel production. BioEnergy Research, 12, 433-442. https://doi.org/10.1007/s12155-019-9965-0
  38. Reza, M. T., Andert, J., Wirth, B., Busch, D., Pielert, J., Lynam, J. G., & Mumme, J. (2014). Hydrothermal carbonization of biomass for energy and crop production. Appl. Bioenergy, 1(1), 11-29.
  39. Saha, B., & Abu-Omar, M. M. (2014). Advances in 5-hydroxymethylfurfural production from biomass in biphasic solvents. Green Chemistry, 16(1), 24-38. https://doi.org/10.1039/C3GC41324A
  40. Salame, P. H., Pawade, V. B., & Bhanvase, B. A. (2018). Characterization tools and techniques for nanomaterials. In Nanomaterials for green energy (pp. 83-111). Elsevier. https://doi.org/10.1016/B978-0-12-813731-4.00003-5
  41. Shao, Y., Ding, Y., Dai, J., Long, Y., & Hu, Z. T. (2021). Synthesis of 5-hydroxymethylfurfural from dehydration of biomass-derived glucose and fructose using supported metal catalysts. Green Synthesis and Catalysis, 2(2), 187-197. https://doi.org/10.1016/j.gresc.2021.01.006
  42. Tiong, Y. W., Yap, C. L., Gan, S., & Yap, W. S. P. (2020). Kinetic and thermodynamic studies of oil palm mesocarp fiber cellulose conversion to levulinic acid and upgrading to ethyl levulinate via indium trichloride-ionic liquids. Renewable Energy, 146, 932-943. https://doi.org/10.1016/j.renene.2019.07.024
  43. Yi, G., Teong, S. P., Li, X., & Zhang, Y. (2014). Purification of biomass‐derived 5‐hydroxymethylfurfural and its catalytic conversion to 2, 5‐furandicarboxylic acid. ChemSusChem, 7(8), 2131-2135. https://doi.org/10.1002/cssc.201402105
  44. Yu, H., Niu, S., Lu, C., Li, J., & Yang, Y. (2017). Sulfonated coal-based solid acid catalyst synthesis and esterification intensification under ultrasound irradiation. Fuel, 208, 101-110. https://doi.org/10.1016/j.fuel.2017.06.122
  45. Zhang, T., Fan, W., Li, W., Xu, Z., Xin, H., Su, M.,. & Ma, L. (2017). One‐Pot Conversion of Carbohydrates into 5‐(Hydroxymethyl) furfural using Heterogeneous Lewis‐Acid and Brønsted‐Acid Catalysts. Energy Technology, 5(5), 747-755. https://doi.org/10.1002/ente.201600492
  46. Zhang, Z., Zhen, J., Liu, B., Lv, K., & Deng, K. (2015). Selective aerobic oxidation of the biomass-derived precursor 5-hydroxymethylfurfural to 2, 5-furandicarboxylic acid under mild conditions over a magnetic palladium nanocatalyst. Green Chemistry, 17(2), 1308-1317.
  47. Zhu, C., Zhai, J., & Dong, S. (2012). Bifunctional fluorescent carbon nanodots: green synthesis via soy milk and application as metal-free electrocatalysts for oxygen reduction. Chemical communications, 48(75), 9367-9369.
  48. Zümrütdal, E., Zarifi, F., Yiğittekin, E. S., İstifli, E. S., Mertoğlu, T. Ş., Türüt, N.,. & Kılınççeker, G. (2022). Effect of Activated Carbon in Yogurt Production. Natural and Engineering Sciences, 7(1), 1-21. https://doi.org/10.28978/nesciences.1098648
  49. Huang, L., Xie, C., Liu, J., Zhang, X., Chang, K., Kuo, J.,. & Evrendilek, F. (2018). Influence of catalysts on co-combustion of sewage sludge and water hyacinth blends as determined by TG-MS analysis. Bioresource technology, 247, 217-225. https://doi.org/10.1016/j.biortech.2017.09.039
  50. Park, S. Y., Lee, H. U., Park, E. S., Lee, S. C., Lee, J. W., Jeong, S. W.,. & Lee, J. (2014). Photoluminescent green carbon nanodots from food-waste-derived sources: large-scale synthesis, properties, and biomedical applications. ACS applied materials & interfaces, 6(5), 3365-3370.
  51. Peng, D., Qiao, S., Luo, Y., Ma, H., Zhang, L., Hou, S.,. & Xu, H. (2020). Performance of microbial induced carbonate precipitation for immobilizing Cd in water and soil. Journal of hazardous materials, 400, 123116. https://doi.org/10.1016/j.jhazmat.2020.123116
  52. Zhang, T., Fan, W., Li, W., Xu, Z., Xin, H., Su, M.,. & Ma, L. (2017). One‐Pot Conversion of Carbohydrates into 5‐(Hydroxymethyl) furfural using Heterogeneous Lewis‐Acid and Brønsted‐Acid Catalysts. Energy Technology, 5(5), 747-755. https://doi.org/10.1002/ente.201600492
  53. Zümrütdal, E., Zarifi, F., Yiğittekin, E. S., İstifli, E. S., Mertoğlu, T. Ş., Türüt, N.,. & Kılınççeker, G. (2022). Effect of Activated Carbon in Yogurt Production. Natural and Engineering Sciences, 7(1), 1-21. https://doi.org/10.28978/nesciences.1098648