Dergiler / Journal of Turkish Operations Management / 2025 / Cilt: 9 Sayı: 2

Investigation of barriers for circular economy using Delphi, Best Worst Method, and EDAS: An application study in Turkey for a manufacturing company

Ayça Maden(BEYKENT UNIVERSITY)0000-0002-8239-3084
Sayfa
233–245
Yayın Tarihi
2025-12-30
🏛️Bu makalenin bibliyografik verileri ve tam metin bağlantısı DergiPark üzerinden sağlanmıştır.
DergiPark Kaydı ↗
✨

Yapay Zeka Hızlı Bakış & Çıkarımlar

AI Insight
⚡ TL;DR(1 Cümlede Hızlı Çıkarım)

Furthermore, it provides a practical application within a manufacturing company situated in Turkey, a developing country context.

📌 3 Maddede Bu Makale

🎯
Amaç & Hipotez:Adopting the principles of circular economy has become imperative for manufacturing firms to maintain their competitiveness in the global market.
📊
Temel Bulgular & Veri:Examining the adoption of circular practices through the lens of companies' sustainability goals is essential for identifying specific objectives related to circular economy initiatives and overcoming associated barriers.
💡
Sonuç & Katkı:Furthermore, it provides a practical application within a manufacturing company situated in Turkey, a developing country context.
🔬Tür:Literatür & Derleme Çalışması
📍Kapsam:Genişletilmiş Akademik Örneklem
⚙️Değişkenler:Circular economy barriers · Manufacturing sector · Delphi

Abstract

Adopting the principles of circular economy has become imperative for manufacturing firms to maintain their competitiveness in the global market. Examining the adoption of circular practices through the lens of companies' sustainability goals is essential for identifying specific objectives related to circular economy initiatives and overcoming associated barriers. This study presents a case analysis conducted within a manufacturing company to address these barriers. Initially, the company's sustainable development goals were assessed and weighted using the Best Worst method. Subsequently, barriers hindering the transition to a circular economy were identified through a comprehensive literature review, with critical barriers determined through the Delphi method. Leveraging the weighted sustainable development goals, a prioritized ranking of critical barriers was established using the EDAS method. The findings of the study underscore the significance of addressing key barriers to circular economy adoption. Notably, the top three barriers identified include the high cost of eco-friendly materials, the need for technological and infrastructural advancements, and stakeholder environmental awareness. This study holds practical importance in evaluating circular economy adoption barriers in alignment with sustainable development goals. Furthermore, it provides a practical application within a manufacturing company situated in Turkey, a developing country context.

🔖

Bu Makaleye Atıf Yap

Maden, A. (2025). Investigation of barriers for circular economy using Delphi, Best Worst Method, and EDAS: An application study in Turkey for a manufacturing company. Journal of Turkish Operations Management, Cilt: 9 Sayı: 2, 233–245. https://doi.org/10.56554/jtom.1465973

📄 Tam Metin PDF Okuyucu

📄

PDF görüntüleyici hazırlanıyor...

Kaynakça (44)

  1. Agrawal, R., Wankhede, V. A., Kumar, A., & Luthra, S. (2021). Analysing the roadblocks of circular economy adoption in the automobile sector: Reducing waste and environmental perspectives. Business Strategy and the Environment, 30(2), 1051–1066. Doi: https://doi.org/10.1002/bse.2669
  2. Ayçin, E., & Kayapinar Kaya, S. (2021). Towards the circular economy: Analysis of barriers to implementation of Turkey’s zero waste management using the fuzzy DEMATEL method. Waste Management and Research, 39(8), 1078–1089. Doi: https://doi.org/10.1177/0734242X20988781
  3. Badhotiya, G. K., Avikal, S., Soni, G., & Sengar, N. (2022). Analyzing barriers for the adoption of circular economy in the manufacturing sector. International Journal of Productivity and Performance Management, 71(3), 912–931. Doi: https://doi.org/10.1108/IJPPM-01-2021-0021
  4. Berchicci, L., & Bodewes, W. (2005). Bridging environmental issues with new product development. Business
  5. Strategy and the Environment, 14(5), 272–285. Doi: https://doi.org/10.1002/bse.488 Chhimwal, M., Agrawal, S., & Kumar, G. (2022). Challenges in the implementation of circular economy in manufacturing industry. Journal of Modelling in Management, 17(4), 1049–1077. Doi: https://doi.org/10.1108/JM2-07-2020-0194
  6. Cui, Y., Liu, W., Rani, P., & Alrasheedi, M. (2021). Internet of Things (IoT) adoption barriers for the circular economy using Pythagorean fuzzy SWARA-CoCoSo decision-making approach in the manufacturing sector. Technological Forecasting and Social Change, 171(February), 120951. Doi: https://doi.org/10.1016/j.techfore.2021.120951
  7. Dimitrova, V., Gallucci, T., Marinov, G., & Boshnakov, P. (2024). A fuzzy AHP study of barriers for circularity in the wine sector in Bulgaria. British Food Journal, 126(1), 255–270. Doi: https://doi.org/10.1108/BFJ-12-2022-1113
  8. Dohale, V., Gunasekaran, A., Akarte, M., & Verma, P. (2021). An integrated Delphi-MCDM-Bayesian Network framework for production system selection. International Journal of Production Economics, 242(January), 108296. Doi: https://doi.org/10.1016/j.ijpe.2021.108296
  9. Emovon, I., Norman, R. A., & Murphy, A. J. (2018). Hybrid MCDM based methodology for selecting the optimum maintenance strategy for ship machinery systems. Journal of Intelligent Manufacturing, 29(3), 519–531. Doi: https://doi.org/10.1007/s10845-015-1133-6
  10. Erol, I., Murat, I., Peker, I., & Searcy, C. (2022). Alleviating the Impact of the Barriers to Circular Economy Adoption Through Blockchain: An Investigation Using an Integrated MCDM-based QFD With Hesitant Fuzzy Linguistic Term Sets. Computers & Industrial Engineering, 165(December 2021), 107962. Doi: https://doi.org/10.1016/j.cie.2022.107962
  11. Geng, Y., Fu, J., Sarkis, J., & Xue, B. (2012). Towards a national circular economy indicator system in China: An evaluation and critical analysis. Journal of Cleaner Production, 23(1), 216–224. Doi: https://doi.org/10.1016/j.jclepro.2011.07.005
  12. Ghorabaee, M. K., Zavadskas, E. K., Olfat, L., & Turskis, Z. (2015). Multi-Criteria Inventory Classification Using a New Method of Evaluation Based on Distance from Average Solution (EDAS). Informatica (Netherlands), 26(3), 435–451. Doi: https://doi.org/10.15388/Informatica.2015.57
  13. Govindan, K., Nasr, A. K., Karimi, F., & Mina, H. (2022). Circular economy adoption barriers: An extended fuzzy best–worst method using fuzzy DEMATEL and Supermatrix structure. Business Strategy and the Environment, 31(4), 1566–1586. Doi: https://doi.org/10.1002/bse.2970
  14. Haleem, A., Khan, S., Pundir, H., Jain, A., Upadhyay, P., & Khan, M. I. (2021). Investigating Barriers Toward the Implementation of Circular Economy: A Fuzzy CRITIC Approach. Journal of Industrial Integration and Management, 6(1), 107–139.
  15. Haleem, A., Khan, S., Pundir, H., Jain, A., Upadhyay, P., & Khan, M. I. (2022). Adoption of circular economy for food waste management in the context of a developing country. Journal of Industrial Integration and Management, 40(6), 676–684. Doi: https://doi.org/10.1177/0734242X211038198
  16. Jaeger, B., & Upadhyay, A. (2020). Understanding barriers to circular economy: cases from the manufacturing industry. Journal of Enterprise Information Management, 33(4), 729–745. Doi: https://doi.org/10.1108/JEIM-02-2019-0047
  17. Jawahir, I. S., & Bradley, R. (2016). Technological Elements of Circular Economy and the Principles of 6R-Based Closed-loop Material Flow in Sustainable Manufacturing. Procedia CIRP, 40, 103–108. Doi: https://doi.org/10.1016/j.procir.2016.01.067
  18. Kaviani, M. A., Karbassi Yazdi, A., Ocampo, L., & Kusi-Sarpong, S. (2020). An integrated grey-based multi-criteria decision-making approach for supplier evaluation and selection in the oil and gas industry. Kybernetes, 49(2), 406–441. Doi: https://doi.org/10.1108/K-05-2018-0265
  19. Kazancoglu, I., Sagnak, M., Kumar Mangla, S., & Kazancoglu, Y. (2021). Circular economy and the policy: A framework for improving the corporate environmental management in supply chains. Business Strategy and the Environment, 30(1), 590–608. Doi: https://doi.org/10.1002/bse.2641
  20. Khandelwal, C., & Barua, M. K. (2024). Prioritizing Circular Supply Chain Management Barriers Using Fuzzy AHP: Case of the Indian Plastic Industry. Global Business Review, 25(1), 232–251. Doi: https://doi.org/10.1177/0972150920948818
  21. Kumar, G., & Goswami, M. (2019). Sustainable supply chain performance, its practice and impact on barriers to collaboration. International Journal of Productivity and Performance Management, 68(8), 1434–1456. Doi: https://doi.org/10.1108/IJPPM-12-2018-0425
  22. Kumar, R., Singh, K., & Jain, S. K. (2020). Agile manufacturing: a literature review and Pareto analysis. International Journal of Quality and Reliability Management, 37(2), 207–222. Doi: https://doi.org/10.1108/IJQRM-12-2018-0349
  23. Kumar, V., Sezersan, I., Garza-Reyes, J. A., Gonzalez, E. D. R. S., & AL-Shboul, M. A. (2019). Circular economy in the manufacturing sector: benefits, opportunities and barriers. Management Decision, 57(4), 1067–1086. Doi: https://doi.org/10.1108/MD-09-2018-1070
  24. Lahane, S., & Kant, R. (2022). Investigating the sustainable development goals derived due to adoption of circular economy practices. Waste Management, 143(February), 1–14. Doi: https://doi.org/10.1016/j.wasman.2022.02.016
  25. Liang, F., Brunelli, M., & Rezaei, J. (2020). Consistency issues in the best worst method: Measurements and thresholds. Omega (United Kingdom), 96, 102175. Doi: https://doi.org/10.1016/j.omega.2019.102175
  26. Lieder, M., & Rashid, A. (2016). Towards circular economy implementation: A comprehensive review in context of manufacturing industry. Journal of Cleaner Production, 115, 36–51. Doi: https://doi.org/10.1016/j.jclepro.2015.12.042
  27. Linstone, H. A., Turoff, M., & Helmer, O. (1975). The delphi method. Reading, MA: Addison-Wesley, 3–12. Doi: https://doi.org/10.1007/s00256-011-1145-z
  28. Liu, Y., & Bai, Y. (2014). An exploration of firms’ awareness and behavior of developing circular economy: An empirical research in China. Resources, Conservation and Recycling, 87, 145–152. Doi: https://doi.org/10.1016/j.resconrec.2014.04.002
  29. Liu, Y., Wood, L. C., Venkatesh, V. G., Zhang, A., & Farooque, M. (2021). Barriers to sustainable food consumption and production in China: A fuzzy DEMATEL analysis from a circular economy perspective. Sustainable Production and Consumption, 28, 1114–1129. Doi: https://doi.org/10.1016/j.spc.2021.07.028
  30. Mahanth, T., Suryasekaran, C. R., Ponnambalam, S. G., Sankaranarayanan, B., Karuppiah, K., & Nielsen, I. E. (2023). Modelling the Barriers to Circular Economy Practices in the Indian State of Tamil Nadu in Managing E-Wastes to Achieve Green Environment. Sustainability (Switzerland), 15(5). Doi: https://doi.org/10.3390/su15054224
  31. Mangla, S. K., Luthra, S., Mishra, N., Singh, A., Rana, N. P., Dora, M., & Dwivedi, Y. (2018). Barriers to effective circular supply chain management in a developing country context. Production Planning and Control, 29(6), 551–569. Doi: https://doi.org/10.1080/09537287.2018.1449265
  32. Moktadir, M. A., Rahman, T., Rahman, M. H., Ali, S. M., & Paul, S. K. (2018). Drivers to sustainable manufacturing practices and circular economy: A perspective of leather industries in Bangladesh. Journal of Cleaner Production, 174, 1366–1380. Doi: https://doi.org/10.1016/j.jclepro.2017.11.063
  33. Ozkan-Ozen, Y. D., Kazancoglu, Y., & Kumar Mangla, S. (2020). Synchronized Barriers for Circular Supply Chains in Industry 3.5/Industry 4.0 Transition for Sustainable Resource Management. Resources, Conservation and Recycling, 161(June), 104986. Doi: https://doi.org/10.1016/j.resconrec.2020.104986
  34. Preston, F. (2012). A Global Redesign? Shaping the Circular Economy. Energy, Environment and Resource
  35. Governance, March, 1–20. Access link: https://d1wqtxts1xzle7.cloudfront.net/32547802/A_global_redesign_-_shaping_the_circular_economy-libre.pdf?1391208840=&response-content-disposition=inline%3B+filename%3Dbriefing_paper_A_Global_Redesign_Shaping.pdf&Expires=1763478857&Signature=WyEQ4DDVtmUk3M6r7QAraj9RHGvpr9xCWau587ysbO33TELfugQYZ~VFyv4egJwvC-jnePvxgA9DFNAknctSRPOFq0oOU2GUMvP~7E2WtSlLHAnJrzINaxM5QoTXGXpoI1-VaztIuD~aUO0XIyb5WoJGVK8bagHkLA1Gt0GOpNbNdLE29yD6b2cPERP~obqlKgPlRNvlgYNjQxEzbKJqIy6fca4hnqCuDDkSsJLFfAy2mefczT~rr8kI6gS3th8-H-zjyK9hJkkFhwJhwYGJb0ZFzem1YyfTzg7HUCdGLgtGtmcdIOuHbgAqxnsm2AJKOG75NZ1Q5OnBocG2PbXkwQ__&Key-Pair-Id=APKAJLOHF5GGSLRBV4ZA
  36. Rezaei, J. (2015). Best-worst multi-criteria decision-making method. Omega (United Kingdom), 53, 49–57. Doi: https://doi.org/10.1016/j.omega.2014.11.009
  37. Rezaei, J. (2016). Best Worst Method. Access link: https://bestworstmethod.com/ Saaty, T. L., & Ozdemir, M. S. (2003). Why the magic number seven plus or minus two. Mathematical and Computer Modelling, 38(3–4), 233–244. Doi: https://doi.org/10.1016/S0895-7177(03)90083-5
  38. Sharma, M., Joshi, S., & Govindan, K. (2021). Issues and solutions of electronic waste urban mining for circular economy transition: An Indian context. Journal of Environmental Management, 290(April), 112373. Doi: https://doi.org/10.1016/j.jenvman.2021.112373
  39. Singh, R. K., Kumar, A., Garza-Reyes, J. A., & de Sá, M. M. (2020). Managing operations for circular economy in the mining sector: An analysis of barriers inte
  40. Su, B., Heshmati, A., Geng, Y., & Yu, X. (2013). A review of the circular economy in China: Moving from rhetoric to implementation. Journal of Cleaner Production, 42, 215–227. Doi: https://doi.org/10.1016/j.jclepro.2012.11.020 Thinakaran, S., Chandravelu, P., Ponnambalam, S. G., Sankaranarayanan, B., & Karuppiah, K. (2023). Analyzing the Challenges to Circular Economy in Indian Fashion Industry. IEEE Access, 11(January), 711–727. Doi: https://doi.org/10.1109/ACCESS.2022.3233197
  41. Torkayesh, A. E., Deveci, M., Karagoz, S., & Antucheviciene, J. (2023). A state-of-the-art survey of evaluation based on distance from average solution (EDAS): Developments and applications. Expert Systems with Applications, 221(February), 119724. Doi: https://doi.org/10.1016/j.eswa.2023.119724
  42. Tseng, M. L., Chiu, A. S. F., Liu, G., & Jantaralolica, T. (2020). Circular economy enables sustainable consumption and production in multi-level supply chain system. Resources, Conservation and Recycling, 154, 104601. Doi: https://doi.org/10.1016/j.resconrec.2019.104601
  43. Yazdani, M., Torkayesh, A. E., Santibanez-Gonzalez, E. D., & Otaghsara, S. K. (2020). Evaluation of renewable energy resources using integrated Shannon Entropy—EDAS model. Sustainable Operations and Computers, 1(December), 35–42. Doi: https://doi.org/10.1016/j.susoc.2020.12.002
  44. Erol, I., Murat, I., Peker, I., & Searcy, C. (2022). Alleviating the Impact of the Barriers to Circular Economy Adoption Through Blockchain: An Investigation Using an Integrated MCDM-based QFD With Hesitant Fuzzy Linguistic Term Sets. Computers & Industrial Engineering, 165(December 2021), 107962. Doi: https://doi.org/10.1016/j.cie.2022.107962