KaydedilenlerDerginizi ekleyin

Dergiler / Journal of Advances in Manufacturing Engineering / 2021 / Volume: 2 Issue: 2

Hot ultrasonic assisted machining modelling of Ti6Al4V in terms of power consumption

M. Alper Sofuoğlu(Department of Mechanical Engineering, Eskişehir Osmangazi University)0000-0003-4681-6390
Melih Cemal Kuşhan(Department of Aeronautical Engineering, Eskişehir Osmangazi University)0000-0002-9427-6192
Sezan Orak(Department of Mechanical Engineering, Eskişehir Osmangazi University)0000-0003-3811-6415
Sayfa
—
Yayın Tarihi
2021-12-30
DOI
—
🏛️Bu makalenin bibliyografik verileri ve tam metin bağlantısı DergiPark üzerinden sağlanmıştır.
DergiPark Kaydı ↗
✨

Yapay Zeka Hızlı Bakış & Çıkarımlar

AI Insight
⚡ TL;DR(1 Cümlede Hızlı Çıkarım)

Also, power consumption changes with the increase in heating temperature and vibration frequency/amplitude.

📌 3 Maddede Bu Makale

🎯
Amaç & Hipotez:Ultrasonic assisted machining is a manufacturing method which creates intermittent cutting mechanism using ultrasonic vibration.
📊
Temel Bulgular & Veri:In the present study, Hot Ultrasonic Assisted Turning (HUAT) of Ti6Al4V alloy was studied numerically via DEFORM-2D software.
💡
Sonuç & Katkı:Also, power consumption changes with the increase in heating temperature and vibration frequency/amplitude.
🔬Tür:Research Article
📍Kapsam:Genişletilmiş Akademik Örneklem
⚙️Değişkenler:Cutting forces · hot machining · preheating temperatures

Abstract

Ultrasonic assisted machining is a manufacturing method which creates intermittent cutting mechanism using ultrasonic vibration. Hot machining is another technique which uses external heat source before or during machining operations. These methods help to machine difficult to cut materials such as titanium, nickel, composite materials and improve surface machining characteristics (low cutting force, stress level, etc.). Hot ultrasonic-assisted machining is a novel machining technique that combines Ultrasonic Assisted machining (UAT) and hot machining operations. In the present study, Hot Ultrasonic Assisted Turning (HUAT) of Ti6Al4V alloy was studied numerically via DEFORM-2D software. Cutting speed, feed rate, vibrational parameters, and preheating temperatures were chosen as cutting parameters for the simulation study. Cutting forces, maximum effective stresses, and cutting temperatures were calculated with respect to these parameters. This process has also been investigated in terms of its effect on the environment and energy consumption. Cutting speed, feed rate and preheating temperatures affect machining characteristics while vibrational parameters do not affect significantly. Decrease in cutting speed and feed rate leads to lower power consumption. Also, power consumption changes with the increase in heating temperature and vibration frequency/amplitude.

🔖

Bu Makaleye Atıf Yap

Sofuoğlu, M. A., Kuşhan, M. C., Orak, S. (2021). Hot ultrasonic assisted machining modelling of Ti6Al4V in terms of power consumption. Journal of Advances in Manufacturing Engineering, Volume: 2 Issue: 2. https://ajindex.com/articles/1505020

📄 Tam Metin PDF Okuyucu

📄

PDF görüntüleyici hazırlanıyor...

Kaynakça (36)

  1. Niknam, S. A., Khettabi, R., & Songmene, V. (2014).Machinability and Machining of Titanium Alloys: A Review, in Machining of Titanium Alloys. In J. P. Davim (Ed.), Materials Forming, Machining and Tribology (pp. 1–30). Springer Berlin Heidelberg. https://doi.org/10.1007/978-3-662-43902-9_1
  2. Singh, P., Pungotra, H., & Kalsi, N.S. (2016). On the Complexities in Machining Titanium Alloys, in D.K. Mandal and C. S. Syan, (Eds.), CAD/CAM, Robotics and Factories of the Future (pp. 499–507) Springer India. https://doi.org/10.1007/978-81-322-2740-3_49
  3. Amini, S., & Teimouri, R. (2016). Parametric study and multicharacteristic optimization of rotary turning process assisted by longitudinal ultrasonic vibration, Proceedings of the Institution of Mechanical Engineers, Part E, 231(5), 978-991. https://doi.org/10.1177/0954408916651894
  4. Babitsky, V., Kalashnikov, A., Meadows, A., & Wijesundara, A.A.H. (2003). Ultrasonically assisted turning of aviation materials. Journal of Materials Processing Technology, 132(1–3), 157–167. https://doi.org/10.1016/S0924-0136(02)00844-0
  5. Babitsky, V., Mitrofanov, A., & Silberschmidt, V.V. (2004). Ultrasonically assisted turning of aviation materials: simulations and experimental study. Ultrasonics, 42(1–9), 81–86. https://doi.org/10.1016/j.ultras.2004.02.001
  6. Jiao, F., Niu, Y., & Liu, X. (2015). Effect of ultrasonic vibration on surface white layer in ultrasonic aided turning of hardened GCr15 bearing steel. Materials Research Innovations, 19(8), S8–938–S8–942. https://doi.org/10.1179/1432891715Z.0000000001844
  7. Mitrofanov, A.V., Babitsky, V.I., & Silberschmidt, V.V. (2003). Finite element simulations of ultrasonically assisted turning. Computational Materials Science, 28(3–4), 645–653. https://doi.org/10.1016/j.commatsci.2003.08.020
  8. Nath, C., & Rahman, M. (2008). Effect of machining parameters in ultrasonic vibration cutting, International Journal of Machine Tools and Manufacture, 48(9), 965–974. https://doi.org/10.1016/j.ijmach-tools.2008.01.013
  9. Zou, P., Xu, Y., He, Y., Chen, M., & Wu, H. (2015). Experimental investigation of ultrasonic vibration assisted turning of 304 austenitic stainless steel. Shock Vibration, 2015, Article 817598. https://doi.org/10.1155/2015/817598
  10. Patil, S., Joshi, S., Tewari, A., & Joshi, S.S. (2014). Modelling and simulation of effect of ultrasonic vibrations on machining of Ti6Al4V. Ultrasonics, 54 (2), 694–705. https://doi.org/10.1016/j.ultras.2013.09.010
  11. Sharma, V.S., Dogra, M., & Suri, N.M. (2008). Advances in the turning process for productivity improvement – a review. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 222(11), 1417–1442. https://doi.org/10.1243/09544054JEM1199
  12. Brehl, D.E., & Dow, T.A. (2008). Review of vibration-assisted machining. Precision Engineering, 32(3), 153–172. https://doi.org/10.1016/j.precisioneng.2007.08.003
  13. Farahnakian, M., & Razfar, M.R. (2014). Experimental study on hybrid ultrasonic and plasma aided turning of hardened steel AISI 4140. Materials and Manufacturing Processes, 29(5), 550–556. https://doi.org/10.1080/10426914.2014.892612
  14. Shamoto, E., Suzuki, N., & Hino, R. (2008). Analysis of 3D elliptical vibration cutting with thin shear plane model. CIRP Annals Manufacturing Technology, 57(1), 57–60. https://doi.org/10.1016/j.cirp.2008.03.073
  15. Shamoto, E., & Moriwaki, T. (1994). Study on elliptical vibration cutting. CIRP Annals Manufacturing Technology, 43(1), 35–38. https://doi.org/10.1016/S0007-8506(07)62158-1
  16. Cheung, C.F., & Lee, W.B. (2000). Modelling and simulation of surface topography in ultra-precision diamond turning. Proceedings of the Institution of Mechanical Engineers, Part B: Journal of Engineering Manufacture, 214(6), 463–480. https://doi.org/10.1243/0954405001517775
  17. Kim, D.S., Chang, I.C., & Kim, S.W. (2002). Microscopic topographical analysis of tool vibration effects on diamond turned optical surfaces. Precision Engineering, 26(2), 168–174. https://doi.org/10.1016/S0141-6359(01)00115-5
  18. Sajjady, S.A., Nouri Hossein Abadi, H., Amini, S., & Nosouhi, R. (2016). Analytical and experimental study of topography of surface texture in ultrasonic vibration assisted turning. Materials & Design, 93, 311–323. https://doi.org/10.1016/j.matdes.2015.12.119
  19. Zhang, C., Ehmann, K., & Li, Y. (2015). Analysis of cutting forces in the ultrasonic elliptical vibration-assisted micro-groove turning process. The International Journal of Advanced Manufacturing Technology, 8(1–4), 139–152. https://doi.org/10.1007/s00170-014-6628-3
  20. Guo, P., & Ehmann, K.F. (2013). Development of a tertiary motion generator for elliptical vibration texturing. Precision Engineering, 37(2), 364–371. https://doi.org/10.1016/j.precisioneng.2012.10.005
  21. Zhang, C., Guo, P., Ehmann, K.F., & Li, Y. (2016). Effects of ultrasonic vibrations in micro-groove turning. Ultrasonics, 67, 30–40. https://doi.org/10.1016/j.ultras.2015.12.016
  22. Amini, S., Hosseinabadi, H.N., & Sajjady, S.A. (2016). Experimental study on effect of micro textured surfaces generated by ultrasonic vibration assisted face turning on friction and wear performance. Applied Surface Science, 390, 633–648. https://doi.org/10.1016/j.apsusc.2016.07.064
  23. Silberschmidt, V.V., Mahdy, S.M.A., Gouda, M.A., Naseer, A., Maurotto, A., & Roy, A. (2014). Surface-roughness improvement in ultrasonically assisted turning. Procedia CIRP, 13, 49–54. https://doi.org/10.1016/j.procir.2014.04.009
  24. Zhang, X., Senthil Kumar, A., Rahman, M., Nath, C., & Liu, K. (2012). An analytical force model for orthogonal elliptical vibration cutting technique. Journal of Manufacturing Processes, 14(3), 378– 387. https://doi.org/10.1016/j.jmapro.2012.05.006
  25. Zhang, X., Kumar, A.S., Rahman, M., & Liu, K. (2013) Modeling of the effect of tool edge radius on surface generation in elliptical vibration cutting. The International Journal of Advanced Manufacturing Technology, 65(1–4), 35–42. https://doi.org/10.1007/s00170-012-4146-8
  26. Razavi, H., & Mirbagheri, M. (2016). Design and fabrication of a novel vibrational system for ultrasonic assisted oblique turning process. Journal of Mechanical Science and Technology, 30(2), 827–835. https://doi.org/10.1007/s12206-016-0137-2
  27. Bai, W., Sun, R., & Leopold, J. (2016). Numerical modelling of microstructure evolution in ti6al4v alloy by ultrasonic assisted cutting. Procedia CIRP, 46, 428–431. https://doi.org/10.1016/j.procir.2016.03.122
  28. Gürgen, S., Çakır, F.H., Sofuoğlu, M.A., Orak, S., Kuşhan, M.C., & Li, H. (2019). Multi-criteria decision-making analysis of different non-traditional machining operations of Ti6Al4V. Soft Computing, 23(13), 5259–5272. https://doi.org/10.1007/s00500-019-03959-8
  29. Sofuoğlu, M.A., Çakır, F.H., Gürgen, S., Orak, S., & Kuşhan, M.C. (2018). Experimental investigation of machining characteristics and chatter stability for Hastelloy-X with ultrasonic and hot turning. The International Journal of Advanced Manufacturing Technology, 95(1–4),83–97. https://doi.org/10.1007/s00170-017-1153-9
  30. Sofuoğlu, M.A., Çakır, F.H., Gürgen, S., Orak, S., & Kuşhan, M.C. (2018). Numerical investigation of hot ultrasonic assisted turning of aviation alloys. Journal of the Brazilian Society of Mechanical Sciences and Engineering, 40(3), 112. https://doi.org/10.1007/s40430-018-1037-4
  31. Lee, W.S., & Lin, C.F. (1998). Plastic deformation and fracture behaviour of Ti–6Al–4V alloy loaded with high strain rate under various temperatures. Materials Science and Engineering: A, 241(1–2):48–59. https://doi.org/10.1016/S0921-5093(97)00471-1
  32. Çakır, F.H., Gürgen, S., Sofuoğlu, M.A., Çelik, O.N., & Kuşhan, M.C. (2015). Finite element modeling of ultrasonic assisted turning of Ti6Al4V alloy. Procedia Social and Behavioral Sciences, 195, 2839–2848. https://doi.org/10.1016/j.sbspro.2015.06.404
  33. Muhammad, R., Maurotto, A., Roy, A., & Silberschmidt, V.V. (2011). Analysis of forces in vibro-impact and hot vibro-impact turning of advanced alloys, Applied Mechanics and Materials, 70, 315–320. https://doi.org/10.4028/www.scientific.net/AMM.70.315
  34. Muhammad, R., Maurotto, A., Roy, A., & Silberschmidt, V.V. (2012). Hot ultrasonically assisted turning of β-ti alloy. Procedia CIRP, 1, 336–341. https://doi.org/10.1016/j.procir.2012.04.060
  35. Özel, T., Sima, M., & Srivastava, A.K. (2010). Finite element simulation of high speed machining Ti-6Al-4V alloy using modified material models. Trans NAMRI/SME 38, 49–56.
  36. Muhammad, R. (2013) Hot ultrasonically assisted turning of Ti15V3Al3Cr3Sn: experimental and numerical analysis (Doctoral dissertation). Loughborough University, UK