Dergiler / Electrica / 2019 / Cilt: 19 - Sayı: 2

Array Antenna Feeding Network Design for 5G MIMO Applications

Sayfa
120–127
DOI
—
🏛️Bu makalenin bibliyografik verileri ve tam metin bağlantısı DergiPark üzerinden sağlanmıştır.
DergiPark Kaydı ↗
✨

Yapay Zeka Hızlı Bakış & Çıkarımlar

AI Insight
⚡ TL;DR(1 Cümlede Hızlı Çıkarım)

An average transmission loss of the feed circuit is measured as 1.5 dB, and when the length of the Phase Shifter in the circuit is set to λ/8, with a four-element linear array added to the output of the Butler circuit, the main beam is steered to ±15o and ±35o having maximum gain in the 6.39–8.77 dBi range.

📌 3 Maddede Bu Makale

🎯
Amaç & Hipotez:Emerging smart antenna systems require different beam patterns of multiple antennas.
📊
Temel Bulgular & Veri:In this study, an antenna-array-feeding circuit based on the Butler matrix that can be used for Multiple Input Multiple Output applications is designed for 5G new radio.
💡
Sonuç & Katkı:An average transmission loss of the feed circuit is measured as 1.5 dB, and when the length of the Phase Shifter in the circuit is set to λ/8, with a four-element linear array added to the output of the Butler circuit, the main beam is steered to ±15o and ±35o having maximum gain in the 6.39–8.77 dBi range.
🔬Tür:Araştırma Makalesi
📍Kapsam:Genişletilmiş Akademik Örneklem
⚙️Değişkenler:Alan Parametreleri

Özet

Emerging smart antenna systems require different beam patterns of multiple antennas. Although adjustable phase shifters are mostly used in continuousbeam systems, the Butler matrix is used in switching-beam systems due to its low cost and easy fabrication. In this study, an antenna-array-feeding circuit based on the Butler matrix that can be used for Multiple Input Multiple Output applications is designed for 5G new radio. With the proposed switching system, the control of four beams can be achieved. The Butler circuit, designed to cover the 3.5–4.2 GHz 5G band, has a low complexity and is capable of meeting the need for high data throughput. A simulation of the circuit and circuit sub-elements designed using a 0.508-mm-thick substrate material is performed using the Computer Simulation Technology Microwave Studio computer-aided design tool. Furthermore, a prototype of the Butler circuit is fabricated, and the amplitude and phase variations at the output ports are measured. An average transmission loss of the feed circuit is measured as 1.5 dB, and when the length of the Phase Shifter in the circuit is set to λ/8, with a four-element linear array added to the output of the Butler circuit, the main beam is steered to ±15o and ±35o having maximum gain in the 6.39–8.77 dBi range.

🔖

Bu Makaleye Atıf Yap

TOKAN, N. T. (2019). Array Antenna Feeding Network Design for 5G MIMO Applications. Electrica, Cilt: 19 - Sayı: 2, 120–127. https://ajindex.com/articles/149227

📄 Tam Metin PDF Okuyucu

📄

PDF görüntüleyici hazırlanıyor...

Kaynakça (10)

  1. White paper, Spirent Communications, “TD-LTE and MIMO Beamforming: Principles and Test Challenges”, August 2012. C. Kang, “MIMO beamforming and its impact on testing TD-LTE”, Microwave Journal, vol. 55, no. 2, 2012. The International Telecommunication Union Radiocommunication (ITU-R), “IMT vision - Framework and Overall Objectives of the Future Development of IMT for 2020 and Beyond”, Rec. ITU-R M.2083-0, pp. 1-21, Sept. 2015. Bilgi Teknolojileri ve İletişim Kurumu (BTK), “5G ve Dikey Sektörler Raporu”, Jan. 2018. J. Blass, “Multidirectional antenna-A new approach to stacked beams”, IRE International Convention Record, New York, Amerika, 21-25 March 1966, pp. 48-50
  2. S. Mosca, F. Bilotti, A. Toscano, L. Vegni, “A novel design method for Blass matrix beam-forming networks”, IEEE Trans. Antennas Propagation, vol. 50, no.2, pp. 225-232, Feb. 2002. J. Nolen, “Synthesis of Multiple Beam Networks for Arbitrary Illuminations”, PhD Thesis, The Johns Hopkins University, Baltimore, USA, 1965.
  3. T. Djerafi, N. J. G. Fonseca, K. Wu, “Broadband substrate integrated waveguide 4 × 4 Nolen matrix based on coupler delay compensation”, IEEE Trans Microw Theory Techn, vol. 59, no.7, pp. 1740-1745, July 2011.
  4. J. Butler, R. Lowe, “Beam forming matrix simplifies design of electronically scanned antennas”, Electron Des, vol. 9, pp. 170-173, April 1961.
  5. C. W. Wang, T. G. Ma, C. F. Yang, “A new planar artificial transmission line and its applications to a miniaturized butler matrix”, IEEE Trans Microw Theory Techn, vol. 55, no. 12, pp. 2792-2801, Dec. 2007.
  6. T. H. Lin, S. K. Hsu, T. L. Wu, “Bandwidth enhancement of 4 × 4 Butler matrix using broadband forward-wave directional coupler and phase difference compensation”, IEEE Trans Microw Theory Techn, vol. 61, no. 12, pp. 4099-4109, 2013.
  7. S. Karamzadeh, V. Rafii, M. Kartal, B. S. Virdee, “Compact and broadband 4 × 4 SIW Butler matrix with phase and magnitude error reduction”, IEEE Antennas Wireless Propag Lett, vol. 25, no. 12, pp. 772-774, 2015.
  8. Y. S. Lin, J. H. Lee, “Miniature Butler matrix design using glass based thin-film integrated passive device technology for 2.5-GHz applications”, IEEE Trans Microw Theory Techn, vol. 61, no. 7, pp. 2594-2602, 2013.
  9. H. N. Chu, T. G. Ma, “An extended 4 × 4 Butler matrix with enhanced beam controllability and widened spatial coverage”, IEEE Trans Microw Theory Techn, vol. 66, no. 3, pp. 1301-1311, March 2018.
  10. N. A. Muhammad, S. K. A. Rahim, N. M. Jizat, T. A. Rahman, K. G. Tan, A. W. Reza, “Beam Fo