Dergiler / Environmental Research and Technology / 2019 / Volume: 2 Issue: 4

The kinetics of the oxidation of ammonia on a V2O5/TiO2 SCR catalyst deactivated in an engine rig. Part I. Determination of kinetic parameters by simulation

İngemar Odenbrand(Department of Chemical Engineering, Lund University)0000-0002-4956-5681
Sayfa
—
Yayın Tarihi
2019-12-31
🏛️Bu makalenin bibliyografik verileri ve tam metin bağlantısı DergiPark üzerinden sağlanmıştır.
DergiPark Kaydı ↗
✨

Yapay Zeka Hızlı Bakış & Çıkarımlar

AI Insight
⚡ TL;DR(1 Cümlede Hızlı Çıkarım)

The changes in the kinetics of the catalytic NH 3 oxidation by deactivation is reported for the first time in the present study.

📌 3 Maddede Bu Makale

🎯
Amaç & Hipotez:It is shown how the deactivation of a diesel SCR (Selective Catalytic Reduction) catalyst by compounds in the exhaust gases influences the kinetics of the catalyst.
📊
Temel Bulgular & Veri:Results are given for the fresh (4.56 % V 2 O 5 /TiO 2 ) catalyst and the ones used in the rig for 890 h and 2299 h.
💡
Sonuç & Katkı:The changes in the kinetics of the catalytic NH 3 oxidation by deactivation is reported for the first time in the present study.
🔬Tür:Modelleme & Sayısal Simülasyon
📍Kapsam:Genişletilmiş Akademik Örneklem
⚙️Değişkenler:Oxidation of ammonia · poisoning and kinetics · Vanadia SCR diesel catalysts

Abstract

It is shown how the deactivation of a diesel SCR (Selective Catalytic Reduction) catalyst by compounds in the exhaust gases influences the kinetics of the catalyst. Results are given for the fresh (4.56 % V 2 O 5 /TiO 2 ) catalyst and the ones used in the rig for 890 h and 2299 h. The reactions of 700 ppm NH 3 and 2 % O 2 in Helium yielded N 2 , N 2 O, and NO at increasing temperatures. Simulations were performed with COMSOL Multiphysics using a 3-D model of the catalyst system. The experimental values of the products N 2 , N 2 O, and NO were very nicely fitted by the kinetic model used. All three ammonia oxidation reaction rates were of the first order in the concentration of NH 3 . A preliminary study using non-isothermal conditions showed the maximal temperature increase to be 0.15 K. Thus, further simulations were done with an isothermal model. The deactivation reduces the pre-exponential factors and the activation energies for the formation of N 2 , N 2 O, and NO. The formation of N 2 is not substantially influenced by deactivation. The changes in the kinetics of the catalytic NH 3 oxidation by deactivation is reported for the first time in the present study.

🔖

Bu Makaleye Atıf Yap

Odenbrand, İ. (2019). The kinetics of the oxidation of ammonia on a V2O5/TiO2 SCR catalyst deactivated in an engine rig. Part I. Determination of kinetic parameters by simulation. Environmental Research and Technology, Volume: 2 Issue: 4. https://doi.org/10.35208/ert.597731

📄 Tam Metin PDF Okuyucu

📄

PDF görüntüleyici hazırlanıyor...

Kaynakça (28)

  1. Konstandopoulos A, Zarvalis D, Chasapidis L, Deloglou L, Vlachos N, Kotbra A, Anderson G (2017) SAE Int. J. Engines 10 (4): 1653.
  2. Jung H, Kittelson DB, Zachariah MR, (2003) SAE Technical Paper 2003-01-3179.
  3. Odenbrand CUI, Catalysis Letters, 2019, DOI 10.1007/s10562-019-02892-7
  4. Koebel M, Elsener M (1998) Chem. Eng. Sci. 53 (4): 657.
  5. Ozkan US, Cai Y, Kuthekar MW, Zhang L (1993) J. Catal. 142:182.
  6. Ozkan US, Cai Y, Kuthekar MW (1994) J. Catal. 149:375.
  7. Duffy BL, Curry-Hyde HE, Cant NW, Nelson PF (1994) J. Phys. Chem. 98: 7153.
  8. Efstathiou AM, Fliatoura K (1995) Appl. Catal. B: Environ. 6:35.
  9. Yates M, Martín JA, Martín-Luengo MA, Suárez S, Blanco J (2005) Catal. Today 107-108: 120.
  10. Djerad S, Crocoll M, Kureti S, Tifouti L, Weisweler W (2006) Catal. Today 113: 208.
  11. Lietti L, Nova I, Forzatti P (2000) Topics in Catalysis 11/12:111.
  12. Odenbrand CUI (2017) Top. Catal. 60: 1317.
  13. Odenbrand CUI (2018) Appl. Catal B: Environ.234: 365.
  14. Roduit B, Wokaun A, Baiker A (1998) Ind. Eng. Chem. Res. 37: 4577.
  15. Koebel M, Elsener M (1998) Chem. Eng. Sci. 53(4): 657.
  16. Chen C-T, Tan W-L (2012) J. of the Taiwan Institute of Chemical Engineers 43:409.
  17. Nahavandi M (2015) Brazilian J. of Chem. Eng. 32(4): 875.
  18. Yun BK, Kim MY (2013) Appl. Thermal Engineering 50:152.
  19. Scheuer A, Hauptmann W, Drochner A, Gieshoff J, Vogel H, Votsmeier M (2012) Appl. Catal. B: Environ. 111-112: 445.
  20. http://www.engineersedge.com/heat_transfer/convective_heat_transfer_ coefficients 13378.
  21. Brandin JGM, Odenbrand CUI (2017) Topic. Catal. 60: 1306.
  22. Brandin JGM, Odenbrand CUI (2018) Catal. Lett. 148(1): 312.
  23. Vaimakis TC, Pomonis PJ, Sdoukos AT (1990) Thermochimica Acta 168:103.
  24. Metkar PS, Balakotaiah V, Harold MP (2011) Chem. Eng. Sci. 66:5192.
  25. Salehi S, Moghaddam MA, Sahebjamee N (2016) International Journal of Engineering 29(9):1183.
  26. Om J, Ji P, Wu W (2015) Asia-Pacific Energy Equipment Engineering Research Conference AP3ER 2015:56.
  27. Schaub G, Unruh D, Wang J, Turek T (2003) Chemical Engineering and Processing 42:365.
  28. Millo F, Rafigh M, Fino D, Micelli P (2017) Fuel 198:183.