Dergiler / Challenge Journal of Structural Mechanics / 2017 / Cilt: 3 - Sayı: 1

Research on relation between natural frequency and axial stress of round bar with intermediate-supported ends

Sayfa
17–22
DOI
—
🏛️Bu makalenin bibliyografik verileri ve tam metin bağlantısı DergiPark üzerinden sağlanmıştır.
DergiPark Kaydı ↗
✨

Yapay Zeka Hızlı Bakış & Çıkarımlar

AI Insight
⚡ TL;DR(1 Cümlede Hızlı Çıkarım)

The theoretical relation and experimental results between a natural frequency and an axial stress agreed for the most part.

📌 3 Maddede Bu Makale

🎯
Amaç & Hipotez:In order to make a method be useful to measure an axial stress of a member by a natural frequency, we investigated a relation between a natural frequency and an ax-ial stress of a round bar with intermediate-supported ends, the boundary condition of which was one between a fix-supported end and a simply-supported end.
📊
Temel Bulgular & Veri:It was shown theoretically that the parameter of an intermediate-supported end could be evaluated by one at a support on a continuous beam consisted of 3 spans.
💡
Sonuç & Katkı:The theoretical relation and experimental results between a natural frequency and an axial stress agreed for the most part.
🔬Tür:Araştırma Makalesi
📍Kapsam:Genişletilmiş Akademik Örneklem
⚙️Değişkenler:Alan Parametreleri

Özet

In order to make a method be useful to measure an axial stress of a member by a natural frequency, we investigated a relation between a natural frequency and an ax-ial stress of a round bar with intermediate-supported ends, the boundary condition of which was one between a fix-supported end and a simply-supported end. To define an intermediate-supported end condition, we adopted a parameter, a ratio of a mo-ment of a force to a deflection angle at the end. It was shown theoretically that the parameter of an intermediate-supported end could be evaluated by one at a support on a continuous beam consisted of 3 spans. The 3-spanned beam has same vibration characteristics of a beam with intermediate-supported ends. We manufactured a test device of a 3-spanned beam by which we could simulate a vibration under various intermediate-supported end conditions. The theoretical relation and experimental results between a natural frequency and an axial stress agreed for the most part.

🔖

Bu Makaleye Atıf Yap

YOSHİDA, T., WATANABE, T., SAKURADA, K. (2017). Research on relation between natural frequency and axial stress of round bar with intermediate-supported ends. Challenge Journal of Structural Mechanics, Cilt: 3 - Sayı: 1, 17–22. https://ajindex.com/articles/144848

📄 Tam Metin PDF Okuyucu

📄

PDF görüntüleyici hazırlanıyor...

Kaynakça (4)

  1. Jinbo Y, Furukawa E (1971). Exercise of Vibration Engineering. Gakukensha. 126-128 (in Japanese). Kudryavsev YF, Residual Stress (2008). Springer Handbook on Experimental Solid Mechanics. Springer -SEM. 371-387.
  2. Leplay P, Rethore J, Meille J, Baietto MC (2011). Identification of damage and cracking behaviors based on energy dissipation mode analysis in a quasi-brittle material using digital image correlation. International Journal of Fracture, 171(1), 35-50.
  3. Moreira PMGP, Lucas FM, Silva, Loureiro ALD (2012). Determination of the strain distribution in adhesive joints using fiber gragg grating sensors. Proceedings of the 15th International Conference on Experimental Mechanics, Porto, Portugal, 581-582.
  4. Timoshenko SP (1954). Vibration Problems in Engineering. D.Van Nostrad Company Inc., Toronto, Canada. Yoshida T, Sakurada K, Hoshino M (2010). Development on measurement technology of axial load in truss structure member by impact sound. Proceedings of the 14th International Conference on Experimental Mechanics, Poitier, France. Yoshida T, Ismail MZB, Watanabe T (2013). Measurement of static stress in round bar by impact sound. Proceedings of the 4th International Conference on Integrity, Reliability & Failure, Funchal, Portugal, 63-64.