Dergiler / Journal of Thermal Engineering / 2022 / Volume: 8 Issue: 1

Experimental investigation of heat transfer characteristics of an inverse diffusion flame in a coaxial tube burner for with and without swirl

Shankar Badıger(Department of Mechanical Engineering, KLS, VDIT, Haliyal, India)0000-0001-7876-1270
Vadıraj V. Kattı(Department of Mechanical Engineering, KLS, VDIT, Haliyal, India)0000-0001-9890-024X
T.r. Anıl(Department of Aeronautical Engineering, KLS, GIT, Belagavi, India)0000-0003-3213-1630
Sayfa
—
Yayın Tarihi
2022-02-01
🏛️Bu makalenin bibliyografik verileri ve tam metin bağlantısı DergiPark üzerinden sağlanmıştır.
DergiPark Kaydı ↗
✨

Yapay Zeka Hızlı Bakış & Çıkarımlar

AI Insight
⚡ TL;DR(1 Cümlede Hızlı Çıkarım)

Swirling in the flame jet enhances the peak heat flux for the higher air jet Reynolds number for slightly fuel rich conditions of ϕ = 1.1 at the optimal burner-to-target plate distance of 40 mm.

📌 3 Maddede Bu Makale

🎯
Amaç & Hipotez:Heat transfer by flame jet impingement is widely used in many of the industrial and domestic applications like heating metal bars, scrap melting, shaping the glass, metal slab cutting, domestic cooking and others.
📊
Temel Bulgular & Veri:The twisted tape of twist ratio 3 (corresponding to the swirl number, S = 0.52) is used to create a swirl in the central air jet of the burner.
💡
Sonuç & Katkı:Swirling in the flame jet enhances the peak heat flux for the higher air jet Reynolds number for slightly fuel rich conditions of ϕ = 1.1 at the optimal burner-to-target plate distance of 40 mm.
🔬Tür:Research Article
📍Kapsam:Genişletilmiş Akademik Örneklem
⚙️Değişkenler:Coaxial Tube Burner · Radial Heat Flux · Inverse Diffusion Flame

Abstract

Heat transfer by flame jet impingement is widely used in many of the industrial and domestic applications like heating metal bars, scrap melting, shaping the glass, metal slab cutting, domestic cooking and others. Aim of the present experimental work is to study an effect of swirl on a local heat flux distribution of an inverse diffusion flame (IDF) jet impinging on a flat target surface in a coaxial tube burner. The twisted tape of twist ratio 3 (corresponding to the swirl number, S = 0.52) is used to create a swirl in the central air jet of the burner. The flame shapes and heat flux distributions are compared for the with and without swirling IDF under the different air jet Reynolds number (Rea) of 1000 to 2500, equivalence ratio (ϕ) of 0.4 to 1.3 and a burner-to-impingement plate distance (H) of 10 to 100mm. The distributions of heat fluxes are studied within a radius of 75 mm from the point of stagnation on an impingement plate. Results show that the swirling IDF helps in clean combustion of the fuel with much shorter flame height. Swirling in the flame jet enhances the peak heat flux for the higher air jet Reynolds number for slightly fuel rich conditions of ϕ = 1.1 at the optimal burner-to-target plate distance of 40 mm.

🔖

Bu Makaleye Atıf Yap

Badıger, S., Kattı, V. V., Anıl, T. (2022). Experimental investigation of heat transfer characteristics of an inverse diffusion flame in a coaxial tube burner for with and without swirl. Journal of Thermal Engineering, Volume: 8 Issue: 1. https://doi.org/10.18186/thermal.1067021

📄 Tam Metin PDF Okuyucu

📄

PDF görüntüleyici hazırlanıyor...

Kaynakça (2)

  1. The article references can be accessed from the.pdf file.
  2. The article references can be accessed from the.pdf file.