KaydedilenlerDerginizi ekleyin

Dergiler / International Journal of Pure and Applied Sciences / 2026 / Volume: 12 Issue: 1

Evaluation of pull-out and push-out relationship for the flat and ribbed reinforcements in concrete with different compressive strengths

Melek Akgül(MUNZUR UNIVERSITY)0000-0001-8815-3762
Orhan Doğan(KIRIKKALE UNIVERSITY)0000-0002-4942-1725
Serkan Etli(KAHRAMANMARAS SUTCU IMAM UNIVERSITY)0000-0003-3093-4106
Sayfa
—
Yayın Tarihi
2026-06-22
🏛️Bu makalenin bibliyografik verileri ve tam metin bağlantısı DergiPark üzerinden sağlanmıştır.
DergiPark Kaydı ↗
✨

Yapay Zeka Hızlı Bakış & Çıkarımlar

AI Insight
⚡ TL;DR(1 Cümlede Hızlı Çıkarım)

Predicted equations for these tests were very usable for estimation of pull-out strength from push-out test results.

📌 3 Maddede Bu Makale

🎯
Amaç & Hipotez:To evaluate the performance of anchors in strengthening an existing building or to estimate the remaining service life of an existing building due to corrosion in reinforcements within the scope of academic studies, adherence tests, mostly based on pull-out are preferred.
📊
Temel Bulgular & Veri:However, pull-out tests have a low usability rate and need to be more laborious in accordance with push-out tests.
💡
Sonuç & Katkı:Predicted equations for these tests were very usable for estimation of pull-out strength from push-out test results.
🔬Tür:Deneysel Tarla Denemesi
📍Kapsam:Genişletilmiş Akademik Örneklem
⚙️Değişkenler:Pull-out · push-out · bond strength

Abstract

To evaluate the performance of anchors in strengthening an existing building or to estimate the remaining service life of an existing building due to corrosion in reinforcements within the scope of academic studies, adherence tests, mostly based on pull-out are preferred. However, pull-out tests have a low usability rate and need to be more laborious in accordance with push-out tests. In this study, it is aimed to show the usability of push-out test instead of pull-out test and to reveal an empirical equation to determine the relationship between these two adherence tests on reinforced concrete samples. Within the scope of this study, dozens of bond tests were performed on reinforced 100×100×100 mm cube specimens with different concrete strengths, using flat and ribbed reinforcement types to represent existing structures. Predicted equations for these tests were very usable for estimation of pull-out strength from push-out test results.

🔖

Bu Makaleye Atıf Yap

Akgül, M., Doğan, O., Etli, S. (2026). Evaluation of pull-out and push-out relationship for the flat and ribbed reinforcements in concrete with different compressive strengths. International Journal of Pure and Applied Sciences, Volume: 12 Issue: 1. https://doi.org/10.29132/ijpas.1801292

📄 Tam Metin PDF Okuyucu

📄

PDF görüntüleyici hazırlanıyor...

Kaynakça (35)

  1. Çakır, Ö. “Effect of ground granulated blast furnace slag on the durability of concrete and rein-forced concrete”, Master of Science Thesis, Yıldız Technical University, 2006, İstanbul
  2. Baradan, B., Aydın, S. “Betonun Durabilitesi (Dayanıklılık, Kalıcılık)”, Türkiye Hazır Beton Birliği Yayınları, İstanbul
  3. Değirmenci, A. “Effect of sılıca fume addıtıon on Reınforcıng steel bar corrosion”, Master of Science Thesis, Gazi University, 2006, Ankara
  4. Ersoy, U., Özcebe, G. “Betonarme”, Evrim Yayınevi ve Bilg. Dağıtım, 2018, Turkey
  5. González, J.A., Andrade, C., Alonso, C., Feliu, S. “Comparison of rates of general corrosion and maximum pitting penetration on concrete embedded steel reinforcement”, Cem Concr Res., 25, 257–264, 1995, https://doi.org/10.1016/0008-8846(95)00006-2
  6. Yudoprasetyo, K., Piscesa, B., Rasyid, H. Al. “Modeling Pull-Out Behavior of the Deformed Rebar Embedded Insıde The Reınforced Concrete”, Journal of Civil Engineering, 37, 2022, https://doi.org/10.12962/j20861206.v37i1.11871
  7. El Alami, E., Fekak, F.-E., Garibaldi L., Moustabchiri H., Elkhalfi, A., Scutarui M.L., Vlase, S. “ Numerical Study of the Bond Strength Evolution of Corroded Reinforcement in Concrete in Pull-Out Tests”, Applied Sciences, 12, 2022, https://doi.org/10.3390/app12020654
  8. Wang, Q., Chen, B., Xu, G., Bao, H., Zeng, J., Xiang, X. “Optimization of test method for bond performance between steel bar and concrete”, Structures, 47, 1822–1835 2023, https://doi.org/10.1016/J.ISTRUC.2022.11.142
  9. Deng, P., Sun, Y., Liu, Y., Song, X. “ Revised Rebound Hammer and Pull-Out Test Strength Curves for Fiber-Reinforced Concrete”, Advances in Civil Engineering, 2020, https://doi.org/10.1155/2020/8263745
  10. Dyba, M. “FEM Simulation of Reinforcing Plain Bar Pull-Out Test from Concrete Sample”, IOP Conf Ser Mater Sci Eng., 960. 2020, https://doi.org/10.1088/1757-899X/960/3/032075
  11. Thiyagarajan, S., Rajkumar, K. “Mechanical properties and bond behaviour of steel rebar and fly ash–slag based geopolymer concrete in pull-out test”, Innovative Infrastructure Solutions, 8. 2023, https://doi.org/10.1007/s41062-023-01081-1
  12. Yudoprasetyo, K. “Pull Out Test Behaviour Corroded Rebar in Concrete with Meso Scale Mod-eling”, 2021, https://doi.org/10.13140/RG.2.2.13118.61762
  13. Güneyisi, E., Özturan, T., Gesoǧlu, M. “A study on reinforcement corrosion and related properties of plain and blended cement concretes under different curing conditions”, Cem Concr Compos., 27, 449–461. 2005, https://doi.org/10.1016/j.cemconcomp. 2004.05.006
  14. Aydın, Ö. “Investıgatıon Of Measures For The Preventıon Of Corrosıon Of Steel In Concrete Structures”, Ph. D. Thesis. Yıldız Tecnical University, 2012, İstanbul
  15. Çoban, Ö. “Effects Of Usage Of Chrome And Olıvın Wastes In Concrete On Durabılıty Propertıes”, Master of Science Thesis, Süleyman Demirel University, 2014,Isparta
  16. Gurbuz, T., İlki, A. “Pullout Performance of Fully and Partially Bonded Retrofit Anchors in Low-Strength Concrete”, ACI Struct J., 2011, 108
  17. Karakurt, C., Kaya, T., Topçu, İ.B. “Effect of Curing Conditions on Adherence Strength Between Concrete and Rebar in Reinforced Concrete”, 2nd International Sustainable Buildings Symposium, Ankara, Turkey, 2015, 92-97
  18. Topçu, İ.B., Boğa A.R. “Effect Of Corrosıon On Adherence Between Reınforcement And Concrete For Reınforced Concrete”, Eng&Arch.Fac. Eskişehir Osmangazi University, 2008
  19. Akgül, M., Doğan, O. “Determination of Reinforcement Adherence Loss by Accelerated Corrosion Test for Normal and 4%NaCl Solubility Cured Flat and Ribbed Reinforced Concretes with Dif-ferent Strengths”, IJERAD, 14(2), 691-704. 2022, doi: 10.29137/umagd.1092523
  20. Yavuz, R., Günaydin,O., Güçlüer K. “Investıgatıon Of Corrosıon And Adherence In Reınforced Concrete”, KSU J Eng Sci., 2019, 22
  21. TS 802. Design Concrete Mixes. TSE, 2016, Ankara
  22. TS EN 933-1. Tests for geometrical properties of aggregates - Part 1: Determination of particle size distribution - Sieving method. TSE, 2012, Ankara
  23. TS EN 1097-6. Tests for mechanical and physical properties of aggregates - Part 6: Determination of particle density and water absorption. TSE, 2022, Ankara
  24. TS EN 197-1. Cement- Part 1: Compositions and conformity criteria for common cements. TSE, 2012, Ankara
  25. Beglarigale, A., Yiğiter H. Yazıcı H., Aytaç A.H., Sevin H.L. “Corrosion Behavior of Reinforced Concrete Specimens Exposed to Wetting-Drying Cycles in Real Marine Environment”, Presented at the May 4, 2019
  26. Yiğiter, H. “The Determınatıon Of Chlorıde Induced Corrosıon Of Rebars By Electrochemıcal Methods”, Ph. D. Thesis. Dokuz Eylül University, 2008, İzmir
  27. Topçu, A., “Betonarme I - Ders Notları”, ESGOÜ, 2018
  28. TS EN 12390-3. Testing hardened concrete - Part 3: Compressive strength of test specimens. TSE, 2019, Ankara
  29. TS EN 12390-7. Testing hardened concrete - Part 7: Density of hardened concrete. TSE, 2019, Ankara
  30. Demirtaş, B. The effect of corrosion on reinforced concrete columns in regard of seismic perfor-mance. Master of Science Thesis, İstanbul Technical University, 2008, İstanbul
  31. Dogan O., Celik F., Odacioglu O.G., Sevim O. “In situ determination of the mechanical perfor-mance of the steel rods anchored on an existing masonry building wall”, Sādhanā. 46. 2021, https://doi.org/10.1007/s12046-021-01697-y
  32. Haberal, Y. “Investigation of Chloride Ion Penetration and Reinforcement Corrosion of Concrete Produced With Fly Ashes”, Master of Science Thesis, Eskişehir Osmangazi University, 2010, Eskişehir
  33. Göktepe, M., “Effect Of C3A Ratıo Of Concrete On Sulfate Attack And Chloride Pen-etration”, Master of Science Thesis, İstanbul Technical University, 2008, İstanbul
  34. Tanyıldızı, H. “The Investıgatıon Of The Strength Effect Between Concrete And Steel Surface Of Concrete Type And Reınforcıng Dımensıons Under Curıng Condıtıons”, Doğu Anadolu Bölgesi Araştırmaları. 11-16, 2006
  35. Deng, P., Sun, Y., Liu, Y., Song, X. “ Revised Rebound Hammer and Pull-Out Test Strength Curves for Fiber-Reinforced Concrete”, Advances in Civil Engineering, 2020, https://doi.org/10.1155/2020/8263745