Dergiler / International Journal of Environment and Geoinformatics / 2026 / Volume: 6 Issue: 1

3D Modelling of Geometric Triangle Construction Elements in Indoor Spaces: A Case Study for Tahir and Zühre Masjid

Hakan Karabörk(Selçuk University, Engineering Faculty, Department of Geomatic Engineering, 42075 Konya, TR)0000-0001-7387-7004
Lütfiye Karasaka(Selçuk University, Engineering Faculty, Department of Geomatic Engineering, 42075 Konya, TR)0000-0001-7387-7004
Bilgehan Makineci(Selçuk University, Engineering Faculty, Department of Geomatic Engineering, 42075 Konya, TR)0000-0001-7387-7004
Ahmet Tanrıverdi(Selçuk University, Engineering Faculty, Department of Geomatic Engineering, 42075 Konya, TR)0000-0001-7387-7004
Bekir Yener(Selçuk University, Engineering Faculty, Department of Geomatic Engineering, 42075 Konya, TR)0000-0001-7387-7004
Neslişah Ulutaş(Selçuk University, Engineering Faculty, Department of Geomatic Engineering, 42075 Konya, TR)0000-0001-7387-7004
F Nevriye Öztürk(Selçuk University, Engineering Faculty, Department of Geomatic Engineering, 42075 Konya, TR)0000-0001-7387-7004
Sayfa
—
Yayın Tarihi
2019-04-12
🏛️Bu makalenin bibliyografik verileri ve tam metin bağlantısı DergiPark üzerinden sağlanmıştır.
DergiPark Kaydı ↗
✨

Yapay Zeka Hızlı Bakış & Çıkarımlar

AI Insight
⚡ TL;DR(1 Cümlede Hızlı Çıkarım)

As a result, it has b een observed that the method of close range photogrammetry for documentation and restoration works is not only successful in outdoor facade but also indoor modelling.

📌 3 Maddede Bu Makale

🎯
Amaç & Hipotez:Tahir and Zühre Masjid, which is one of the works of Konya and Anatolian Seljuk Period, serve daily from the 13th century and draw attention with its interior architecture.
📊
Temel Bulgular & Veri:In this study, interior 3D modeling study of Tahir and Zühre Masjid was made by using close range photogrammetry.
💡
Sonuç & Katkı:As a result, it has b een observed that the method of close range photogrammetry for documentation and restoration works is not only successful in outdoor facade but also indoor modelling.
🔬Tür:Modelleme & Sayısal Simülasyon
📍Kapsam:Genişletilmiş Akademik Örneklem
⚙️Değişkenler:Close-range Photogrammetry · 3D Modelling · Indoor Space Modelling

Abstract

Tahir and Zühre Masjid, which is one of the works of Konya and Anatolian Seljuk Period, serve daily from the 13th century and draw attention with its interior architecture. The Masjid is seated on a square plan and covered with a dome using triangular transitional elements. These artifacts are the most important proofs of the architectural perspectives and orientations of the past period. Demonstrating and documenting past architectural and engineering skills has become much easier with modern measurement and evaluation techniques at the present time. In this study, interior 3D modeling study of Tahir and Zühre Masjid was made by using close range photogrammetry. Also the triangular transitional elements between the square plan and the dome of the structure were picked out. As a result, it has b een observed that the method of close range photogrammetry for documentation and restoration works is not only successful in outdoor facade but also indoor modelling.

🔖

Bu Makaleye Atıf Yap

Karabörk, H., Karasaka, L., Makineci, B., Tanrıverdi, A., Yener, B., Ulutaş, N., Öztürk, F. N. (2019). 3D Modelling of Geometric Triangle Construction Elements in Indoor Spaces: A Case Study for Tahir and Zühre Masjid. International Journal of Environment and Geoinformatics, Volume: 6 Issue: 1. https://doi.org/10.30897/ijegeo.551733

📄 Tam Metin PDF Okuyucu

📄

PDF görüntüleyici hazırlanıyor...

Kaynakça (7)

  1. Deniz, A., Şeker, DZ., Alkan, M., Karakış, S., Bayık, S. & Acar, H. (2018). Development of Web-Based GIS for the Cultural Heritage of Safranbolu, Turkey, International Journal of Environment and Geoinformatics (IJEGEO) Vol. 5(3), 368-377.
  2. Konyalı, İ. H. (1997). Konya Tarihi. Burak Matbaası, Ankara.
  3. Kraus, K. (1994). Photogrammetry 1, Dümmler.
  4. Turan, Ş.N. & Yaldız, E. (2018). XIII. Yüzyıl Konya Mahalle Mescitlerinde Kullanılan Kubbeye Geçiş Elamanları, Türk-İslam Medeniyeti Akademik Araştırmalar Dergisi, Cilt:13, Sayı: 26,2018-Yaz
  5. Turan, Ş.N. (2018), Türk Mimarisinde Kullanılan Kubbeye Geçiş Elemanları; XIII. Yüzyıl Anadolu Selçuklu Dönemi Konya Mahalle Mescitleri Örneği”, NEÜ, FBE, Yayımlanmamış Yüksek Lisans Tezi.
  6. URL 1. http://www.photomodeler.com/index.html.
  7. Yakar, M. & Doğan, Y. (2018). GIS and threedimensional Modeling for Cultural Heritages, International Journal of Engineering and Geosciences (IJEG), Vol; 3(2): 50-55.