Dergiler / International Journal of Environment and Geoinformatics / 2026 / Volume: 8 Issue: 3

The Separation Characteristics of an Isopropyl Alcohol/water Azeotrope Using Evapomeation and Temperature-difference Controlling Evapomeation Methods with PVA/NaY Membranes

Fatma Kurşun(KIRKLARELİ ÜNİVERSİTESİ)0000-0003-0212-0973
Sayfa
—
Yayın Tarihi
2021-09-05
🏛️Bu makalenin bibliyografik verileri ve tam metin bağlantısı DergiPark üzerinden sağlanmıştır.
DergiPark Kaydı ↗
✨

Yapay Zeka Hızlı Bakış & Çıkarımlar

AI Insight
⚡ TL;DR(1 Cümlede Hızlı Çıkarım)

The best separation factor was obtained as 2097.38 using the evaporation method and 2483.75 using the TDEV method.

📌 3 Maddede Bu Makale

🎯
Amaç & Hipotez:In this study, the permeation and separation characteristics during the evapomeation and temperature-difference controlling evapomeation (TDEV) of an isopropyl alcohol/water (IPA/water) azeotrope through poly(vinyl alcohol)/NaY (PVA/NaY) membranes were studied.
📊
Temel Bulgular & Veri:It was observed that the separation factor decreased and the total and partial flux values increased, with increasing the water percentage in the feed concentration and the temperature by using evapomeation and TDEV.
💡
Sonuç & Katkı:The best separation factor was obtained as 2097.38 using the evaporation method and 2483.75 using the TDEV method.
🔬Tür:Research Article
📍Kapsam:2097 Verileri
⚙️Değişkenler:Isopropy alcohol · Evapomeation · TDEV

Abstract

In this study, the permeation and separation characteristics during the evapomeation and temperature-difference controlling evapomeation (TDEV) of an isopropyl alcohol/water (IPA/water) azeotrope through poly(vinyl alcohol)/NaY (PVA/NaY) membranes were studied. The effects of operation temperature and feed concentration on the membrane separation factor and flux have been carried out for evapomeation and TDEV. It was observed that the separation factor decreased and the total and partial flux values increased, with increasing the water percentage in the feed concentration and the temperature by using evapomeation and TDEV. The permeation and diffusion activation energies for IPA/water mixture through PVA/NaY membrane were calculated as 23.69 and 41.61 kj/mol, respectively. The results of PVA and PVA/NaY membranes were supported by swelling behaviors. The best separation factor was obtained as 2097.38 using the evaporation method and 2483.75 using the TDEV method.

🔖

Bu Makaleye Atıf Yap

Kurşun, F. (2021). The Separation Characteristics of an Isopropyl Alcohol/water Azeotrope Using Evapomeation and Temperature-difference Controlling Evapomeation Methods with PVA/NaY Membranes. International Journal of Environment and Geoinformatics, Volume: 8 Issue: 3. https://doi.org/10.30897/ijegeo.881056

📄 Tam Metin PDF Okuyucu

📄

PDF görüntüleyici hazırlanıyor...

Kaynakça (19)

  1. Al-Ghezawi, N., Şanli, O., & Işiklan, N. (2006). Permeation and separation characteristics of acetic acid-water mixtures by pervaporation through acrylonitrile and hydroxy ethyl methacrylate grafted poly(vinyl alcohol) membrane. Separation Science and Technology, 41(13), 2913–2931. https://doi.org/10.1080/01496390600786010
  2. Ang, M. B. M. Y., Huang, S. H., Chang, M. W., Lai, C. L., Tsai, H. A., Hung, W. S., … Lee, K. R. (2020). Ultraviolet-initiated graft polymerization of acrylic acid onto thin-film polyamide surface for improved ethanol dehydration performance of pervaporation membranes. Separation and Purification Technology, 235(July 2019), 116155. https://doi.org/10.1016/j.seppur.2019.116155
  3. Asman, G., & Şanli, O. (2006). Separation characteristics of acetic acid-water mixtures using poly(vinyl alcohol-g-4-vinyl pyridine) membranes by pervaporation and temperature difference evapomeation techniques. Journal of Applied Polymer Science, 100(2), 1385–1394. https://doi.org/10.1002/app.23676
  4. Bowen, T. C., Noble, R. D., & Falconer, J. L. (2004). Fundamentals and applications of pervaporation through zeolite membranes. Journal of Membrane Science, 245(1–2), 1–33. https://doi.org/10.1016/j.memsci.2004.06.059
  5. Bui, T. D., Wong, Y., Thu, K., Oh, S. J., Kum Ja, M., Ng, K. C., … Chua, K. J. (2017). Effect of hygroscopic materials on water vapor permeation and dehumidification performance of poly(vinyl alcohol) membranes. Journal of Applied Polymer Science, 134(17), 1–9. https://doi.org/10.1002/app.44765
  6. Dmitrenko, M., Kuzminova, A., Zolotarev, A., Ermakov, S., Roizard, D., & Penkova, A. (2020). Enhanced pervaporation properties of PVA-based membranes modified with polyelectrolytes. application to IPA dehydration. Polymers, 12(1), 1–22. https://doi.org/10.3390/polym12010014
  7. Fan, S., Wang, Y., Li, C., Lee, K., Liaw, D., & Lai, J. (2003). Permselectivities of 2,2’-Dimethyl-4,4’-bis(aminophenoxyl)- biphenyl Diphenyl Methane–Based Aromatic Polyamide Membranes for Aqueous Alcohol Mixtures in Pervaporation and Evapomeation. Journal of Applied Polymer Science, 88, 2688–2697.
  8. George, S. P., & Barto, B. (1910). Vapor Pressure Data for Isopropyl Alcohol and Tertiary Butyl Alcohol. Contribution From The Chemistry Department of Stanford University, 50, 24–26.
  9. Işiklan, N., & Şanli, O. (2004). Permeation and separation characteristics of acetic acid/water mixtures through poly(vinyl alcohol-g-itaconic acid) membranes by pervaporation, evapomeation, and temperature-difference evapomeation. Journal of Applied Polymer Science, 93(5), 2322–2333. https://doi.org/10.1002/app.20710
  10. Işiklan, N., & Şanli, O. (2005). Permeation and separation characteristics of acetic acid-water mixtures through poly(vinyl alcohol)/malic acid membranes by evapomeation and temperature difference controlled evapomeation. Separation Science and Technology, 40(5), 1083–1101. https://doi.org/10.1081/SS-200048179
  11. Kahya, S., Solak, E. K., & Şanli, O. (2010). Sodium alginate/poly(vinyl alcohol) alloy membranes for the pervaporation, vapour permeation and vapour permeation with temperature difference separation of dimethylformamide/water mixtures: A comparative study. Vacuum, 84(9), 1092–1102. https://doi.org/10.1016/j.vacuum.2010.01.033
  12. Kurşun, F. (2020). Application of PVA-b-NaY zeolite mixture membranes in pervaporation method. Journal of Molecular Structure, 1201. https://doi.org/10.1016/j.molstruc.2019.127170
  13. Kwon, Y., Chaudhari, S., Kim, C., Son, D., Park, J., Moon, M., … Nam, S. (2018). Ag-exchanged NaY zeolite introduced polyvinyl alcohol/polyacrylic acid mixed matrix membrane for pervaporation separation of water/isopropanol mixture. RSC Advances, 8(37), 20669–20678. https://doi.org/10.1039/c8ra03474e
  14. Park, J. Y., Jung, H. C., Raju, G. S. R., Moon, B. K., Jeong, J. H., Choi, H. Y., & Kim, J. H. (2013). Facile solvothermal synthesis and polarity based tunable morphologies of ZnO nanocrystals. Ceramics International, 39(6), 6599–6606. https://doi.org/10.1016/j.ceramint.2013.01.095
  15. Petrucci, R.H., Harwood, W.S., Herring, F. G. (2010). Genel Kimya. (S. Uyar, T., Aksoy, Ed.). Ankara: Palme Yayıncılık.
  16. Salehian, P., & Chung, T. S. (2017). Two-dimensional (2D) particle coating on membranes for pervaporation dehydration of isopropanol: A new approach to seal defects and enhance separation performance. Journal of Membrane Science, 544(June), 378–387. https://doi.org/10.1016/j.memsci.2017.09.038
  17. Uragami, T. (2017). Pervaporation and Evapomeation with Si-Containing Polymers. In Membrane Materials for Gas and Vapor Separation (Vol. 10, pp. 335–372). John Wiley & Sons, Ltd. https://doi.org/https://doi.org/10.1002/9781119112747.ch10
  18. Uragami, T. (2018). Functional Separation Membranes From Grafted Biopolymers. Biopolymer Grafting: Synthesis and Properties. Elsevier Inc. https://doi.org/10.1016/B978-0-323-48104-5.00002-0
  19. Uragami, T., & Morikawa, T. (1989). Permeation of ethanol through poly(dimethylsiloxane) membranes using temperature differences in membrane permeation processes of the evapomeation method. Die Makromolekulare Chemie, Rapid Communications, 10(6), 287–291. https://doi.org/10.1002/marc.1989.030100609