Dergiler / Gazi Mühendislik Bilimleri Dergisi / 2025 / Volume: 11 Issue: 1

A Study on Four-Bar Mechanism with Constant Coupler Point Velocity: Modelling, Numerical Simulation and Experimental Application

Halit Hülako(HAKKARİ ÜNİVERSİTESİ, MÜHENDİSLİK FAKÜLTESİ, MAKİNE MÜHENDİSLİĞİ BÖLÜMÜ)0000-0001-8194-5433
Orhan Çakar(FIRAT ÜNİVERSİTESİ)0000-0001-6947-3875
Sayfa
—
Yayın Tarihi
2025-04-30
DOI
—
🏛️Bu makalenin bibliyografik verileri ve tam metin bağlantısı DergiPark üzerinden sağlanmıştır.
DergiPark Kaydı ↗
✨

Yapay Zeka Hızlı Bakış & Çıkarımlar

AI Insight
⚡ TL;DR(1 Cümlede Hızlı Çıkarım)

PID algorithm is used to control of the crank speed and it is shown that the desired couplar point velocity is achieved.

📌 3 Maddede Bu Makale

🎯
Amaç & Hipotez:In industry, the trace path of a point on the coupler link of four-bar mechanism is often utilized and sometimes it is desired that the couplar point moves on its path with constant velocity.
📊
Temel Bulgular & Veri:We developed a highly detailed simulation model that incorporates intricate system dynamics, including bearing frictions.
💡
Sonuç & Katkı:PID algorithm is used to control of the crank speed and it is shown that the desired couplar point velocity is achieved.
🔬Tür:Modelleme & Sayısal Simülasyon
📍Kapsam:Genişletilmiş Akademik Örneklem
⚙️Değişkenler:Four-Bar Mechanism · Crank Speed Control · Simscape Multibody Model

Özet

In industry, the trace path of a point on the coupler link of four-bar mechanism is often utilized and sometimes it is desired that the couplar point moves on its path with constant velocity. This can be achieved by the variable crank speed. Processes requiring constant speed are often achieved by designing expensive complex mechanisms with high degrees of freedom without feedback control. This study considers the four-bar mechanism driven by a DC motor with constant coupler point velocity. Matlab Simscape MultiBody tool is used to model and to simulate the system dynamics. For the first time, we have successfully implemented an experimental application of coupler point speed control, a mechanism that is much needed in the industry, at a remarkably low cost. We developed a highly detailed simulation model that incorporates intricate system dynamics, including bearing frictions. Additionally, we accurately predicted crucial motor parameters for the application through cost-effective estimation techniques. In order to show the efficiency of the method, some experimental case studies are made besides the numerical simulations, and the results are compared. PID algorithm is used to control of the crank speed and it is shown that the desired couplar point velocity is achieved.

Abstract

In industry, the trace path of a point on the coupler link of four-bar mechanism is often utilized and sometimes it is desired that the couplar point moves on its path with constant velocity. This can be achieved by the variable crank speed. Processes requiring constant speed are often achieved by designing expensive complex mechanisms with high degrees of freedom without feedback control. This study considers the four-bar mechanism driven by a DC motor with constant coupler point velocity. Matlab Simscape MultiBody tool is used to model and to simulate the system dynamics. For the first time, we have successfully implemented an experimental application of coupler point speed control, a mechanism that is much needed in the industry, at a remarkably low cost. We developed a highly detailed simulation model that incorporates intricate system dynamics, including bearing frictions. Additionally, we accurately predicted crucial motor parameters for the application through cost-effective estimation techniques. In order to show the efficiency of the method, some experimental case studies are made besides the numerical simulations, and the results are compared. PID algorithm is used to control of the crank speed and it is shown that the desired couplar point velocity is achieved.

🔖

Bu Makaleye Atıf Yap

Hülako, H., Çakar, O. (2025). A Study on Four-Bar Mechanism with Constant Coupler Point Velocity: Modelling, Numerical Simulation and Experimental Application. Gazi Mühendislik Bilimleri Dergisi, Volume: 11 Issue: 1. https://ajindex.com/articles/1397372

📄 Tam Metin PDF Okuyucu

📄

PDF görüntüleyici hazırlanıyor...

Kaynakça (17)

  1. E. Söylemez, Mechanisms, MMO Middle East Technical University publication number 64, 1985.
  2. J. Tao and J.P Sadler, “Constant speed control of a motor driven mechanism system,” Mechanisms and Machine Theory, vol. 30, no. 5, pp. 737-748, 1995. doi: 10.1016/0094-114X(94)00072-S
  3. Ö. Gündoğdu and K. Erentürk, “Fuzzy Control of a dc motor driven four-bar mechanism,” Mechatronic, Cilt:15, s:423-438, 2005. doi: 10.1016/j.mechatronics.2004.10.004
  4. G. Şevkat ve S. Telli, “Elektrik Motoru İle Tahrik Edilen Dört Çubuk Mekanizmasının Kayan Kip Hız Kontrolu,” Uludağ Universitesi Mühendislik-Mimarlık Dergisi, Cilt:13, No:2, s: 15-26, 2008. doi: 10.17482/uujfe.96125
  5. O. Çakar and A.K.Tanyildizi, “Application of moving sliding mode control for a DC motor driven four-bar mechanism,” Advances in Mechanical Engineering, vol.10, no. 3, pp. 1–13, 2018. doi: 10.1177/1687814018762184
  6. M. Salah, A. Al-Jarrah, E. Tatlicioglu et al. “Robust Backstepping Control for a Four-Bar Linkage Mechanism Driven by a DC Motor,” J Intell Robot Syst, vol. 94, pp. 327–338, 2019. doi: 10.1007/s10846-018-0811-y
  7. G. O Koca, Z. H Akpolat and M. Özdemir, “Type-2 fuzzy sliding mode control of a four-bar mechanism,” Int J Model Simul, vol. 31, pp. 60–68, 2011. doi: 10.2316/Journal.205.2011.1.205-5335
  8. A. Al-Jarrah, M. Salah, K.S. Banihani, et al. “Applications of various control schemes on a four-bar linkage mechanism driven by a geared DC motor,” WSEAS Trans Syst Contr, vol. 10, pp. 584–597, 2015. https://api.semanticscholar.org/CorpusID:11080447
  9. C.F. Chang, “Synthesis of adjustable four-bar mechanisms generating circular arcs with specified tangential velocities,” Mechanism and Machine Theory, vol. 36, no. 3, pp. 387-395, 2001. doi: 10.1016/S0094-114X(00)00049-5
  10. H. S. Yan and R. C. Soong, “Kinematic and dynamic design of four-bar linkages by links counterweighing with variable input speed,” Mechanism and Machine Theory, vol. 36, no. 9, pp. 1051-1071, 2001. doi: 10.1016/S0094-114X(01)00032-5
  11. R. Peón-Escalante, M. Flota-Bañuelos, L. J. Ricalde, C. Acosta, G. S. Perales, “On the coupler point velocity control of variable input speed servo-controlled four-bar mechanism,” Advances in Mechanical Engineering, vol. 8, no. 11, pp. 1–9, 2016. doi: 10.1177/1687814016678356
  12. M. Flota-Bañuelos, R. Peón-Escalante, L. J. Ricalde, B. J. Cruz, R. Quintal-Palomo, J. Medina, “Vision‑based control for trajectory tracking of four‑bar linkage,” J Braz. Soc. Mech. Sci. Eng, vol. 43, no. 324, pp. 1–11, May. 2021. doi: 10.1007/s40430-021-03043-z
  13. R. Peón-Escalante, M. Flota-Bañuelos, R. Quintal-Palomo, L.J. Ricalde, F. Peñuñuri, B. Cruz Jiménez and J. Avilés Viñas, “Neural Network Based Control of Four-Bar Mechanism with Variable Input Velocity,” Mathematics, vol. 11, no.2148, pp. 1-17, 2023. doi: 10.3390/math11092148
  14. O. Denizhan and M. S. Chew, “Linkage mechanism optimization and sensitivity analysis of an automotive engine hood,” International Journal of Automotive Science and Technology, vol. 2, no. 1, pp. 7-16, 2018. doi: 10.30939/ijastech.364438
  15. Matlab, 2021,(n.d.).https://www.mathworks.com/products/simmechanics.html. [Accessed: Feb. 1, 2025].
  16. H. Hülako and O. Yakut, “Control of Three-Axis Manipulator Placed on Heavy-Duty Pentapod Robot,” Simul. Model Pract. Theory, vol. 108, no. May 2020, 2021. doi: 10.1016/j.simpat.2020.102264
  17. O. Denizhan and M. S. Chew, “Linkage mechanism optimization and sensitivity analysis of an automotive engine hood,” International Journal of Automotive Science and Technology, vol. 2, no. 1, pp. 7-16, 2018. doi: 10.30939/ijastech.364438