KaydedilenlerDerginizi ekleyin

Dergiler / Avrupa Bilim ve Teknoloji Dergisi / 2026 / Sayı: 25

Gerilim Sensörü Uygulamaları İçin Çok Duvarlı Karbon Nanotip Dolgulu Elastomer Nanokompozitlerin Piezodirenç Özelliklerinin Araştırılması

Investigation of Piezoresistive Properties of Multi-walled Carbon Nanotube Filled Elastomer Nanocomposites for Strain Sensor Application

Hasan Kasım(Emsa Nano Teknoloji Enerji San. ve Tic. A.Ş)0000-0002-3024-5207
Sayfa
370–379
Yayın Tarihi
2021-08-31
🏛️Bu makalenin bibliyografik verileri ve tam metin bağlantısı DergiPark üzerinden sağlanmıştır.
DergiPark Kaydı ↗
✨

Yapay Zeka Hızlı Bakış & Çıkarımlar

AI Insight
⚡ TL;DR(1 Cümlede Hızlı Çıkarım)

Hazırlanan numunelerin serbest halde iletkenlikleri ölçülmüş ve süzülme eşiğini işaret eden kritik dolgu miktar aralığı tespit edilmiştir.

📌 3 Maddede Bu Makale

🎯
Amaç & Hipotez:Elastomer matris ve çok duvarlı karbon nanotüp (MW-CNT) dolgu malzemeleri ile hazırlanan nanokompozitlerin piezodirenç değişimine göre gerilme sensörü olarak kullanılma olasılığı araştırılmıştır.
📊
Temel Bulgular & Veri:Farklı konsantrasyonlar da MW-CNT ile doldurulmuş elastomer esaslı nanokompozitlerin deformasyon davranışlarını belirlemek için piezodirenç mekanizmasının sistematik bir çalışması gerçekleştirildi.
💡
Sonuç & Katkı:Hazırlanan numunelerin serbest halde iletkenlikleri ölçülmüş ve süzülme eşiğini işaret eden kritik dolgu miktar aralığı tespit edilmiştir.
🔬Tür:Araştırma Makalesi
📍Kapsam:Genişletilmiş Akademik Örneklem
⚙️Değişkenler:Karbon Nanotüp · Piezodirençlilik · Elastomerler

Özet

Elastomer matris ve çok duvarlı karbon nanotüp (MW-CNT) dolgu malzemeleri ile hazırlanan nanokompozitlerin piezodirenç değişimine göre gerilme sensörü olarak kullanılma olasılığı araştırılmıştır. Farklı konsantrasyonlar da MW-CNT ile doldurulmuş elastomer esaslı nanokompozitlerin deformasyon davranışlarını belirlemek için piezodirenç mekanizmasının sistematik bir çalışması gerçekleştirildi. Hazırlanan numunelerin serbest halde iletkenlikleri ölçülmüş ve süzülme eşiğini işaret eden kritik dolgu miktar aralığı tespit edilmiştir. Nanokompozit numunelerine uygulanan gerilmeye bağlı uzamaların neden olduğu direnç değişiklikleri, sırasıyla doğrusal ve doğrusal olmayan iki farklı bölgede piezo davranış göstermiştir. Direnç değişikliğinden, uygulanan gerilmeye bağlı uzamanın bir fonksiyonu olarak hesaplanan ölçüm faktörü, doğrusal bölge için yaklaşık 90 ve doğrusal olmayan bölge için 270 olarak ölçülmüştür. Ağırlıkça %2,92 oranında MW-CNT dolgulu nanokompozitler, %90 ve %150 uzamalar ile yapılan tekrarlı yükleme testlerinde tekrarlana bilirlik ve mükemmel geriye dönüş performansı göstermiştir. Bu çalışma, elastomer malzemelere uygun oranlarda MW-CNT’ler ekleyerek piezodirenç özellikler kazandırdıklarını ve yüksek uzama gerektiren dinamik çalışma ortamlarında hassas gerilim sensörleri olarak kullanılabileceğini göstermiştir.

Abstract

The possibility of using nanocomposites prepared with elastomer matrix and multi-walled carbon nanotube (MW-CNT) filler materials as a strain sensor according to the change of piezoresistance was investigated. A systematic study of the piezoresistive mechanism was realized to determine the deformation behavior of elastomer nanocomposites filled with MW-CNT at different concentrations. By measuring the prepared samples' free-state electrical conductivity, the critical filler material amount range indicating the percolation threshold was determined. The resistance changes caused by strains due to the stress applied to nanocomposite specimens showed piezo behavior in two different regions, linear and nonlinear, respectively. The gauge factor found using the change of resistance as a function of the strain was measured as approximately 90 for the linear region and 270 for the non-linear region. MW-CNT filled nanocomposites with a ratio of 2.92% by weight showed reproducibility and excellent recovery performance in cyclic loading tests with 90% and 150% strains. This study showed that by adding MW-CNTs to elastomer materials in optimum proportions, they gain piezoresistive properties and could be used as sensitive strain sensors in dynamic working environments that require high elongation.

🔖

Bu Makaleye Atıf Yap

Kasım, H. (2021). Gerilim Sensörü Uygulamaları İçin Çok Duvarlı Karbon Nanotip Dolgulu Elastomer Nanokompozitlerin Piezodirenç Özelliklerinin Araştırılması. Avrupa Bilim ve Teknoloji Dergisi, Sayı: 25, 370–379. https://doi.org/10.31590/ejosat.915899

📄 Tam Metin PDF Okuyucu

📄

PDF görüntüleyici hazırlanıyor...

Kaynakça (49)

  1. Shivashankar P., and Gopalakrishnan S. (2020). Review on the use of piezoelectric materials for active vibration, noise, and flow control. In: Smart Materials and Structures, 29 (5). https://dx.doi.org/10.1088/1361-665X/ab7541
  2. Kang I., Schulz M.J., Kim J.H., Shanov V., Shi D. (2006). A carbon nanotube strain sensor for structural health monitoring, Smart Materials and Structures, 15 (3), 737. DOI:10.1088/0964-1726/15/3/009
  3. Xu, T., Qiu, Q., Lu, S., Ma, K., & Wang, X. (2019). Multi-direction health monitoring with carbon nanotube film strain sensor. International Journal of Distributed Sensor Networks. https://doi.org/10.1177/1550147719829683
  4. Qureshi, E.M., Shen, X., & Chang, L. (2015). A Low Frequency Vibration Control by Synchronized Switching on Negative Capacitance and Voltage Sources. International Journal of Control and Automation, 8, 121-138. DOI:10.14257/IJCA.2015.8.6.13
  5. Shihong Xu. & Fan, Zeng & Li, Chengwei & Wang, Peng & Sammed, Khan & Pan, Lujun. (2019). Investigation of strain sensing mechanisms on the ultra-thin carbon nanotube networks with different densities. Carbon. 155. https://doi.org/10.1016/j.carbon.2019.09.004
  6. Kanoun, O., Bouhamed, A., Ramalingame, R., Bautista-Quijano, J. R., Rajendran, D., & Al-Hamry, A. (2021). Review on Conductive Polymer/CNTs Nanocomposites Based Flexible and Stretchable Strain and Pressure Sensors. Sensors (Basel, Switzerland), 21(2),341. https://doi.org/10.3390/s21020341
  7. Shimada, K., & Saga, N. (2017). Development of a Hybrid Piezo Natural Rubber Piezoelectricity and Piezoresistivity Sensor with Magnetic Clusters Made by Electric and Magnetic Field Assistance and Filling with Magnetic Compound Fluid. Sensors (Basel, Switzerland), 17(2), 346. https://doi.org/10.3390/s17020346
  8. Wang, X., Wang, S. & Chung, D.D.L. (1999). Sensing damage in carbon fiber and its polymer-matrix and carbon-matrix composites by electrical resistance measurement. Journal of Materials Science 34, 2703–2713. https://doi.org/10.1023/A:1004629505992
  9. Kim, K. & Tia, Mang & Greene, J. (2017). Performance Characteristics of Fiber-Optic Strain Sensors as Compared With Electrical Resistance and Vibrating Wire Strain Gauges. Journal of Testing and Evaluation. 45. 20160281. 10.1520/JTE20160281.
  10. Avilés, F., May-Pat, A., Canché-Escamilla, G., Rodríguez-Uicab, O., Ku-Herrera, J. J., Duarte-Aranda, S., Uribe-Calderon, J., Gonzalez-Chi, P. I., Arronche, L., & La Saponara, V. (2016). Influence of carbon nanotube on the piezoresistive behavior of multiwall carbon nanotube/polymer composites. Journal of Intelligent Material Systems and Structures, 27(1), 92–103. https://doi.org/10.1177/1045389X14560367
  11. Chen W., Li F., Ooi P.C., Ye Y., Kim T.W., Guo T. (2016). Room temperature pH-dependent ammonia gas sensors using graphene quantum dots. Sensors Actuators B: Chemical, 222, 763–768. https://doi.org/10.1016/j.snb.2015.09.002
  12. Alamusi, Hu, N., Fukunaga, H., Atobe, S., Liu, Y., & Li, J. (2011). Piezoresistive strain sensors made from carbon nanotubes based polymer nanocomposites. Sensors (Basel, Switzerland), 11(11), 10691–10723. https://doi.org/10.3390/s111110691
  13. Oliva-Avilés A., Avilés F., Sosa V. (2011). Electrical and piezoresistive properties of multi-walled carbon nanotube/polymer composite films aligned by anelectric field, Carbon, 49 (9), 2989–2997. https://doi.org/10.1016/j.carbon.2011.03.017
  14. Wichmann M.H.G., Buschhorn S.T., Gehrmann, J., Schulte, K.(2009). Piezoresistive response of epoxy composites with carbon nanoparticles under tensile load. Physical Review B, 80(24), 245437. https://doi.org/10.1103/PhysRevB.80.245437
  15. Kim Y.J., Cha J.Y., Ham H., Huh H., So D.S., Kang I. (2011). Preparation of piezoresistive nano smart hybrid material based on graphene, Current Applied Physics, 11(1), 350-S352. https://doi.org/10.1016/j.cap.2010.11.022
  16. Meeuw H., Viets C., Liebig W., Schulte K., Fiedler B. (2016). Morphological influence of carbon nanofillers on the piezoresistive response of carbon nanoparticle/epoxy composites under mechanical load. European Polymer Journal, 85, 198-210. https://doi.org/10.1016/j.eurpolymj.2016.10.027
  17. Yazıcı, M, Kapucu, O, Kasım, H, Can, Y. (2017). Experimental Investigation on Fatigue Life of Cord-Rubber Composites. Avrupa Bilim ve Teknoloji Dergisi, 2017 Ejosat Aralık Özel Sayı, 16-21. Santos A., Amorim L., Nunes J., Rocha L., Silva A.F., Viana, J.(2019). Aligned carbon nanotube based sensors for strain sensing applications. Sensors and Actuators A-physical, 289, 157-164. https://doi.org/10.1016/j.sna.2019.02.026
  18. Spinelli G., Lamberti P., Tucci V., Vertuccio L., Guadagno L. (2018). Experimental and theoretical study on piezoresistive properties of a structural resin reinforced with carbon nanotubes for strain sensing and damage monitoring. Composites Part B-engineering, 145, 90-99. https://doi.org/10.1016/j.compositesb.2018.03.025
  19. Yin, G., Hu, N., Karube, Y., Liu, Y., Li, Y., & Fukunaga, H. (2011). A carbon nanotube/polymer strain sensor with linear and anti-symmetric piezoresistivity. Journal of Composite Materials, 45(12), 1315–1323. https://doi.org/10.1177/0021998310393296
  20. Bokobza, L. (2012). Multiwall carbon nanotube-filled natural rubber: electrical and Mechanical Properties. Express Polymer Letters. 6. 213-223. 10.3144/expresspolymlett.2012.24. DOI:10.3144/expresspolymlett.2012.24
  21. Qingliang He., Yuan T., Zhang X., Guo S., Liu J., Liu J.,Liu X., Sun L., Wei S., Guo Z. (2014). Heavy duty piezoresistivity induced strain sensing natural rubber/carbon black nanocomposites reinforced with different carbon nanofillers, Materials Research Express, 1(3), 035029. DOI:10.1088/2053-1591/1/3/035029
  22. Chen L., Chen G., Lu L. (2007). Piezoresistive behavior study on finger sensing silicone rubber/graphite nanosheet nanocomposites, Advanced Functional Materials, 17(6), 898–904. https://doi.org/10.1002/adfm.200600519
  23. Wang P., Geng S., Ding T. (2010). Effects of carboxyl radical on electrical resistance ofmulti-walled carbon nanotube filled silicone rubber composite underpressure. Composite Science and Technology, 70(10), 1571–1573. https://doi.org/10.1016/j.compscitech.2010.05.008
  24. Gao L., Chou T.W., Thostenson E.T., Zhang Z., Coulaud M. (2011). In situ sensing ofimpact damage in epoxy/glass fiber composites using percolating carbonnanotube networks. Carbon, 49(10), 3382–3385, 2011. https://doi.org/10.1016/j.carbon.2011.04.003
  25. Zhang, Xiang-Wu & Pan, yi & Yi, Xiaosu. (2000). Time dependence of piezoresistance for the conductor-filled polymer composites. Journal of Polymer Science Part B: Polymer Physics. 38. 2739 - 2749. 10.1002/1099-0488(20001101)38:21 3.0.CO;2-O.
  26. Wang L., Ding T. H., Wang P. (2009). Influence of carbon black concentration on piezoresistivity for carbon-black-filled silicone rubber composite. Carbon, 47(14), 3151–3157. https://doi.org/10.1016/j.carbon.2009.06.050
  27. Knite M., Teteris V., Kiploka A., Kaupuzs J. (2004). Polyisoprene–carbon black nanocomposites as tensile strain and pressure sensor materials. Sensors and Actuators A: Physical, 110(1–3), 142–149. https://doi.org/10.1016/j.sna.2003.08.006
  28. Chervanyov A.I.,Selvan N.T., Eshwaran S.B., Das A., Stöckelhuber K.W., Wießner S., Pötschke P.,. Nando G.B, Heinrich G. (2016). Piezoresistive natural rubber-multiwall carbon nanotube nanocomposite for sensor applications. Sensors and Actuators A: Physical, 239, 102-113. https://doi.org/10.1016/j.sna.2016.01.004
  29. Peng Z., Feng C., Luo Y., Li Y., Kong L. (2010). Self-assembled natural rubber/multi-walled carbon nanotube composites using latex compounding techniques. Carbon, 48, 4497-4503. https://doi.org/10.1016/j.carbon.2010.08.025
  30. Simmons J.G. (1963). Electric tunnel effect between dissimilar electrodes separated by a thin insulating film, J Applied Physics, 34(9), 2581. https://doi.org/10.1063/1.1729774
  31. Rahman R., Servati P. (2012). Effects of inter-tube distance and alignment on tunnelling resistance and strain sensitivity of nanotube/polymer composite films. Nanotechnology, 23(5), 055703. DOI: 10.1088/0957-4484/23/5/055703
  32. Bauhofer, W.; Kovacs, J.Z. (2009). A review and analysis of electrical percolation in carbon nanotube polymer composites. Composite Science and Technology, 69(10), 1486-1498. https://doi.org/10.1016/j.compscitech.2008.06.018
  33. Perets Y.S., Lazarenko O., Sivoloshsky O.A., Vovchenko L., Matzui L. (2020). Percolation characteristics of multi-polymer composites with different ratios of nanocarbon fillers. Molecular Crystals and Liquid Crystals, 699, 110 – 97. https://doi.org/10.1080/15421406.2020.1732544
  34. Chen J., Yan L. (2018). Effect of Carbon Nanotube Aspect Ratio on the Thermal and Electrical Properties of Epoxy Nanocomposites. Fullerenes, Nanotubes and Carbon Nanostructures, 26, 697–704. https://doi.org/10.1080/1536383X.2018.1476345
  35. Chanklin W., Laowongkotr J., Chibante L.P. (2018). Electrical property validation of percolation modeling in different polymer structures of carbon-based nanocomposites. Materials today Communications, 17, 153-160. https://doi.org/10.1016/j.mtcomm.2018.09.004
  36. Hu N., Masuda Z., Yan C., Yamamoto G., Fukunaga H., Hashida T. (2008). The electrical properties of polymer nanocomposites with carbon nanotube fillers. Nanotechnology, 19(21), 215701. DOI:10.1088/0957-4484/19/21/215701
  37. Sánchez-Romate X.F., Jiménez-Suárez A., Sánchez M., Güemes A., Ureña A. (2016). Novel approach to percolation threshold on electrical conductivity of carbon nanotube reinforced nanocomposites. RSC Advances, 6, 43418-43428. https://doi.org/10.1039/C6RA03619H
  38. Yang W., Ke K., Yue L., Shao H., Yang M., Manas-Zloczower I.(2021). Boosting Electrical and Piezoresistive Properties of Polymer Nanocomposites via Hybrid Carbon Fillers: A Review. Carbon, 173, 1020-104. https://doi.org/10.1016/j.carbon.2020.11.070
  39. Yazdani-Pedram M., Aguilar-Bolados H., Contreras-Cid A., López-Manchado M.A., May-Pat A., Avilés F.(2017). Influence of the morphology of carbon nanostructures on the piezoresistivity of hybrid natural rubber nanocomposites. Composites Part B-engineering, 109, 147-154. https://doi.org/10.1016/j.compositesb.2016.10.057
  40. Balberg I. (1987). Tunneling and nonuniversal conductivity in composite materials. Phys. Rev. Lett. 59(12), 1305–1308. DOI: 10.1103/PhysRevLett.59.1305
  41. Meguid S., Alian A. (2019). Multiscale modeling of the coupled electromechanical behavior of multifunctional nanocomposites. Composite Structures, 208, 826-835. https://doi.org/10.1016/j.compstruct.2018.10.066
  42. Das, A., Natarajan T.S., Eshwaran S., Stöckelhuber K.W., Wießner S., Pötschke P., Heinrich G. (2017). Strong Strain Sensing Performance of Natural Rubber Nanocomposites. ACS applied materials & interfaces, 9 5, 4860-4872. https://doi.org/10.1021/acsami.6b13074
  43. Xu W., Allen M. (2013). Deformable Strain Sensors Based on Patterned MWCNTs/ Polydimethylsiloxane Composites. Journal of Polymer Science Part B, 51, 1505-1512. https://doi.org/10.1002/polb.23361
  44. Kasım H., Demir, B. (2021). Investigation of electrical properties of hybrid nanocomposites containing different fillers on pressure sensor applications under different loading. Journal of Composite Materials, 0(0), 1-9, 2021. https://doi.org/10.1177/0021998321990714
  45. Kalantari M., Dargahi J., Kövecses J., Mardasi M.G., Nouri, S. (2012). A New Approach for Modeling Piezoresistive Force Sensors Based on Semiconductive Polymer Composites. IEEE/ASME Transactions on Mechatronics, 17, 572-581. DOI: 10.1109/TMECH.2011.2108664
  46. Kanoun, O., Bouhamed, A., Ramalingame, R., Bautista-Quijano, J. R., Rajendran, D., & Al-Hamry, A. (2021). Review on Conductive Polymer/CNTs Nanocomposites Based Flexible and Stretchable Strain and Pressure Sensors. Sensors (Basel, Switzerland), 21(2),341. https://doi.org/10.3390/s21020341
  47. Kim, K. & Tia, Mang & Greene, J. (2017). Performance Characteristics of Fiber-Optic Strain Sensors as Compared With Electrical Resistance and Vibrating Wire Strain Gauges. Journal of Testing and Evaluation. 45. 20160281. 10.1520/JTE20160281.
  48. Alamusi, Hu, N., Fukunaga, H., Atobe, S., Liu, Y., & Li, J. (2011). Piezoresistive strain sensors made from carbon nanotubes based polymer nanocomposites. Sensors (Basel, Switzerland), 11(11), 10691–10723. https://doi.org/10.3390/s111110691
  49. Yazıcı, M, Kapucu, O, Kasım, H, Can, Y. (2017). Experimental Investigation on Fatigue Life of Cord-Rubber Composites. Avrupa Bilim ve Teknoloji Dergisi, 2017 Ejosat Aralık Özel Sayı, 16-21.