Dergiler / Dicle Üniversitesi Fen Bilimleri Enstitüsü Dergisi / 2017 / Cilt: 6 - Sayı: 1

Betonda Çimento ve Aggrega Yerıne Kullanılan Atık ve İkincil Maddeler

Concrete With by-products And Waste Materials As Aggregate or Cement: An Overview

Sayfa
29–38
Yayın Tarihi
2017-03-01
DOI
—
🏛️Bu makalenin bibliyografik verileri ve tam metin bağlantısı DergiPark üzerinden sağlanmıştır.
DergiPark Kaydı ↗
✨

Yapay Zeka Hızlı Bakış & Çıkarımlar

AI Insight
⚡ TL;DR(1 Cümlede Hızlı Çıkarım)

Bu atıkların isimleri ve farklı alanlarda kullanılmasından kısaca söz edilmiştir

📌 3 Maddede Bu Makale

🎯
Amaç & Hipotez:Beton, özellikle çimento inşaat sektöründe en yaygın kullanılan yapı malzemesidir.
📊
Temel Bulgular & Veri:Böylece atıkların depolanması azalır ve çevre sorunlarını azaltmada önemli faydalar sağlar, özellikle CO2 emisyonları da azaltmaktadır.
💡
Sonuç & Katkı:Bu atıkların isimleri ve farklı alanlarda kullanılmasından kısaca söz edilmiştir
🔬Tür:Literatür & Derleme Çalışması
📍Kapsam:Genişletilmiş Akademik Örneklem
⚙️Değişkenler:Concrete · Industrial waste and by-products materials · Economy and environment

Özet

Beton, özellikle çimento inşaat sektöründe en yaygın kullanılan yapı malzemesidir. Çimento üretimi büyük miktarda enerji gerektirir ve çevre kirliliğine sebep olmaktadır. Çevreyi korumanın yollarından biri, çimento üretiminin azaltılmasıdır. Ayrıca çimento veya beton ham maddeleri için doğal kaynaklardan fazla kullanılmaktadır ve böylece çevreye zarar vermekteyiz. Öte yandan endüstriyel atıklar ve sanayi yan ürünleri de artmakta ve bu atıklar arttıkça çevre için tehlikeli olabilir. Bu maddelerın betonda kullanılması ile, doğal kaynaklardan daha az kullanılmakta ve çevre kirlenmemesine sebep olmaktadır. Böylece atıkların depolanması azalır ve çevre sorunlarını azaltmada önemli faydalar sağlar, özellikle CO2 emisyonları da azaltmaktadır. Bu derleme makalede betonun agregası olarak veya çimentonun bir kısmı olarak hatta klinkerde bu atık ve alternatif maddeler kullanılmaktadır. Bu atıkların isimleri ve farklı alanlarda kullanılmasından kısaca söz edilmiştir

Abstract

Concrete is the most widely used building material in the construction industry. Cement production requires large amounts of energy and has a major role in environmental pollution and emissions of greenhouse gases. Reducing the consumption of cement is one of the ways to protect the environment. Increases in the use of natural aggregate causes the environmental destruction. On the other hand, the waste industrial and by-products materials can be hazardous for the environment. In this review, the majority of natural and industrial wastes used in concrete were briefly mentioned and described and different areas of applications have been given. These waste materials are deposited on open air spaces causing serious environmental problems. The effect of using these wastes, individually or in combination on concrete properties was discussed. This paper investigate some waste materials which are used in concrete as cement or aggregate. The alternative materials tested were, such as fly ash as binder for cement replacement, recycled fine aggregate originating from mixed construction and demolition waste and steel slag as coarse aggregate.

🔖

Bu Makaleye Atıf Yap

CENGİZLER, H., JAHANGIRI, N., KÖSEOĞLU, K. (2017). Betonda Çimento ve Aggrega Yerıne Kullanılan Atık ve İkincil Maddeler. Dicle Üniversitesi Fen Bilimleri Enstitüsü Dergisi, Cilt: 6 - Sayı: 1, 29–38. https://ajindex.com/articles/134400

📄 Tam Metin PDF Okuyucu

📄

PDF görüntüleyici hazırlanıyor...

Kaynakça (16)

  1. Kosmatka, S.H., Kerkhoff, B., Panarese, W.C., (2002). Design and Control of Concrete Mixture. Portland Cement Association, Skokie, Illinois
  2. Tu, T.Y., Chen, Y.Y., Hwang, C.L., (2006). Properties of HPC with recycled aggregates. Cem. Concr. Compos. 36, 943–950
  3. Qasrawi, H., Shalabi, F., Asi, I., (2009). Use of low CaO unprocessed steel slag in concrete as fine aggregate. Constr. Build. Mater. 23, 1118–1125
  4. Mannan, M.A., Ganapathy, C., (2004). Concrete from an agricultural waste – oil palm shell (OPS). Builld. Environ. 39, 441–448
  5. Ogawa, H., (2000). Sustainable solid waste management in developing countries. In: Proceedings of the 7th ISWA International Congress and Exhibition. World Health Organization, Kuala Lumpur. Available from: /http://www. gdrc.org/ uem/waste/swm-fogawa1.htmS
  6. Ismail ZZ, Al-Hashmi EA. Reuse of waste iron as a partial replacement of sand in concrete. Waste Manage (2008); 28:2048–53
  7. Sear, L., (2005). Towards zero waste. Concrete 39, 50–52
  8. Rakshvir, M., Barai, S.V., (2006). Studies on recycled aggregates-based concrete. Waste Manage. Res. 24, 225– 233
  9. Motz H, Geiseler J. Products of steel slags an opportunity to save natural resources. Waste Manage (2001); 21:285–93
  10. Muhmood L, Vitta S, Venkateswaran D. Cementitious and pozzolanic behavior of electric arc furnace steel slags. Cem Concr Res (2009); 39:102–9
  11. Vàzquezramonich E, Barra M. Reactivity and expansion of electric arc furnace slag in their application in construction. Mater de Constucción (2001);51:137–48
  12. Wu S, Xue Y, Ye Q, Chen Y. Utilization of steel slag as aggregates for stone mastic asphalt (SMA) mixtures. Build Environ (2007); 42:2580–5
  13. Manso JM, Polanco JA, Losañez M, González JJ. Durability of concrete made with EAF slag as aggregate. Cem Concr Compos (2006); 28:528–34
  14. Maslehuddin M, Sharif AM, Shameem M, Ibrahim M, Barry MS. Comparison of properties of steel slag and crushed limestone aggregate concretes. Construct Build Mater (2003); 17:105–12
  15. Abu-Eishah, S. I., El-Dieb, A. S., & Bedir, M. S. (2012). Performance of concrete mixtures made with electric arc furnace (EAF) steel slag aggregate produced in the Arabian Gulf region. Construction and Building Materials, 34, 249– 256. http://doi.org/10.1016/j.conbuildmat (2012.02.012
  16. Pellegrino, C., Cavagnis, P., Faleschini, F., & Brunelli, K. (2013). Properties of concretes with black/oxidizing electric arc furnace slag aggregate. Cement and Concrete Composites, 37