KaydedilenlerDerginizi ekleyin

Dergiler / Isı Bilimi ve Tekniği Dergisi / 2017 / Cilt: 37 - Sayı: 2

Heat Transfer from an Oscillated Vertical Annular Fluid Column Through a Porous Domain: a Thermodynamic Analysis of the Experimental Results

Ersin SAYAR
Sayfa
1–12
Yayın Tarihi
2017-10-31
DOI
—
🏛️Bu makalenin bibliyografik verileri ve tam metin bağlantısı DergiPark üzerinden sağlanmıştır.
DergiPark Kaydı ↗
✨

Yapay Zeka Hızlı Bakış & Çıkarımlar

AI Insight
⚡ TL;DR(1 Cümlede Hızlı Çıkarım)

The present investigation has possible applications in moderate sized wicked heat pipes, boilers, compact heat exchangers and steam generators.

📌 3 Maddede Bu Makale

🎯
Amaç & Hipotez:Heat transfer in an oscillating vertical annular fluid column flowing through a porous domain in the single phase or bubbly flow two-phase regime (sub-cooled or saturated nucleate flow boiling) are investigated experimentally and theoretically, in quasi-steady state conditions.
📊
Temel Bulgular & Veri:Forced oscillations are applied to water via a frequency controlled dc motor and a piston-cylinder device.
💡
Sonuç & Katkı:The present investigation has possible applications in moderate sized wicked heat pipes, boilers, compact heat exchangers and steam generators.
🔬Tür:Laboratuvar & Saha Deneyi
📍Kapsam:Genişletilmiş Akademik Örneklem
⚙️Değişkenler:Salınım · Isı geçişi deneyi

Özet

Heat transfer in an oscillating vertical annular fluid column flowing through a porous domain in the single phase or bubbly flow two-phase regime (sub-cooled or saturated nucleate flow boiling) are investigated experimentally and theoretically, in quasi-steady state conditions. Forced oscillations are applied to water via a frequency controlled dc motor and a piston-cylinder device. Heat transfer is from the stationary concentric tubular electric heating element outer surface to the reciprocating flow. The heat transfer in an oscillating vertical annular fluid column flowing in the single phase or in the bubbly flow regime is altered by using stainless steel wool porous medium. For the single phase region of flow, it is understood that, the effective heat transfer mechanism is enhanced and it is due to the hydrodynamic boundary layer which can not follow the core flow. Bubbly (nucleate) flow boiling in oscillating flow is also investigated experimentally and theoretically using a simplified thermodynamic analysis. The onset of boiling temperature is distinctly dropped compared to the pool and flow boiling experiments on polished surfaces due the finned surface effect of the steel porous domain, due to the enhanced mixing of the boundary layer flow and core flow; due to the improvement of apparent surface roughness and due to the alteration of ebullition cycle (bubbles are limited by the cell volume here). The developed correlation predicted cycle-space averaged Nusselt number is shown to be in good agreement with the experimental data. The present investigation has possible applications in moderate sized wicked heat pipes, boilers, compact heat exchangers and steam generators.

🔖

Bu Makaleye Atıf Yap

SAYAR, E. (2017). Heat Transfer from an Oscillated Vertical Annular Fluid Column Through a Porous Domain: a Thermodynamic Analysis of the Experimental Results. Isı Bilimi ve Tekniği Dergisi, Cilt: 37 - Sayı: 2, 1–12. https://ajindex.com/articles/133234

📄 Tam Metin PDF Okuyucu

📄

PDF görüntüleyici hazırlanıyor...

Kaynakça (15)

  1. Akdag, U. and A.F. Ozguc, Experimental investigation of heat transfer in oscillating annular flow. International Journal of Heat and Mass Transfer, 2009. 52(11-12): p. 2667-2672.
  2. Akdag, U., M. Ozdemir, and A.F. Ozguc, Heat removal from oscillating flow in a vertical annular channel. Heat and Mass Transfer, 2008. 44(4): p. 393-400.
  3. Arslan, G. and M. Ozdemir, Correlation to predict heat transfer of an oscillating loop heat pipe consisting of three interconnected columns. Energy Conversion and Management, 2008. 49(8): p. 2337-2344.
  4. Bau, H. and K. Torrance, Low Rayleigh number thermal convection in a vertical cylinder filled with porous materials and heated from below. Journal of Heat Transfer, 1982. 104(1): p. 166-172.
  5. Chatwin, P.C., Longitudinal Dispersion of Passive Contaminant in Oscillatory Flows in Tubes. Journal of Fluid Mechanics, 1975. 71(Oct14): p. 513-527.
  6. Chen, Z.D. and J.J.J. Chen, A simple analysis of heat transfer near an oscillating interface. Chemical Engineering Science, 1998. 53(5): p. 947-950.
  7. Chuah, Y. and V. Carey, Boiling Heat Transfer in a Shallow Fluidized Particulate Bed. Journal of Heat Transfer, 1987. 109(1): p. 196-203.
  8. Costello, C. and E. Redeker. Boiling heat transfer and maximum heat flux for a surface with coolant supplied by capillary wicking. in Chem. Eng. Progr. Symposium Ser. 1963.
  9. Damronglerd, P. and Y. Zhang, Transient fluid flow and heat transfer in a porous structure with partial heating and evaporation on the upper surface. Journal of Enhanced Heat Transfer, 2006. 13(1). Dhir, D.V.K., Boiling and two-phase flow in porous media. Annual review of heat transfer, 1994. 5(5). Dhir, V., Boiling heat transfer. Annual review of fluid mechanics, 1998. 30(1): p. 365-401.
  10. Dhir, V. and I. Catton, Dryout heat fluxes for inductively heated particulate beds. Journal of Heat Transfer, 1977. 99(2): p. 250-256.
  11. Faghri, A. and Y. Zhang, Transport phenomena in multiphase systems. 2006:
  12. Academic press. Faghri, A. Heat pipe science and technology. in Fuel and Energy Abstracts. 1995.
  13. Furberg, R., Enhanced Boiling Heat Transfer on a Dendritic and Micro-Porous Copper Structure. 2011.
  14. Kurzweg, U.H. and L. Dezhao, Heat-Transfer by High-Frequency Oscillations - a New Hydrodynamic Technique for Achieving Large Effective Thermal-Conductivities. Physics of Fluids, 1984. 27(11): p. 2624-2627.
  15. Li, H., et al., Three-dimensional numerical simulation of fluid flow with phase change heat transfer in an asymmetrically heated porous channel. International J