KaydedilenlerDerginizi ekleyin

Dergiler / Maden Tetkik ve Arama Dergisi / 2021 / Cilt: 164 - Sayı: 164

Optimization of leaching conditions for extraction of magnesium from a chromite beneficiation plant tailing predominantly containing lizardite

Hakan ÇİFTÇİ
Bekir ARSLAN
Ayşegül BİLEN
Zeyni ARSOY
Bahri ERSOY
Sayfa
251–259
Yayın Tarihi
2021-04-15
DOI
—
🏛️Bu makalenin bibliyografik verileri ve tam metin bağlantısı DergiPark üzerinden sağlanmıştır.
DergiPark Kaydı ↗
✨

Yapay Zeka Hızlı Bakış & Çıkarımlar

AI Insight
⚡ TL;DR(1 Cümlede Hızlı Çıkarım)

Mg dissolution process found to be diffusion controlled.

📌 3 Maddede Bu Makale

🎯
Amaç & Hipotez:In this study, leaching experiments were performed for extraction of magnesium from a chromite beneficiation plant tailing predominantly containing lizardite.
📊
Temel Bulgular & Veri:The X-ray fluorescence (XRF) and X-ray diffraction (XRD) analyzes showed that the tailing sample contains 39.3wt.% MgO and consist of predominantly lizardite mineral.
💡
Sonuç & Katkı:Mg dissolution process found to be diffusion controlled.
🔬Tür:Araştırma Makalesi
📍Kapsam:Genişletilmiş Akademik Örneklem
⚙️Değişkenler:Leaching · Lizardite · Magnesium

Abstract

In this study, leaching experiments were performed for extraction of magnesium from a chromite beneficiation plant tailing predominantly containing lizardite. The X-ray fluorescence (XRF) and X-ray diffraction (XRD) analyzes showed that the tailing sample contains 39.3wt.% MgO and consist of predominantly lizardite mineral. Hydrochloric acid (HCl) and sulphuric acid (H₂SO₄) were used as acids separately in leaching experiments. Acid concentration, leaching temperature, leaching time, and solid ratio were investigated as leaching parameters and optimized. Maximum magnesium extraction yield was determined to be nearly 98% for both acids under optimum leaching parameters which leaching temperature was 85°C, solid ratio was 20wt.%, leaching time was 120 minutes, and acid concentrations were 6 M for HCl and 4 M for H₂SO₄. In addition, it was determined that the leaching residue as a solid state was mainly composed of amorphous silicate according to the XRD analysis. Dissolution rate data were explained using Jander equation. Mg dissolution process found to be diffusion controlled.

🔖

Bu Makaleye Atıf Yap

ÇİFTÇİ, H., ARSLAN, B., BİLEN, A., ARSOY, Z., ERSOY, B. (2021). Optimization of leaching conditions for extraction of magnesium from a chromite beneficiation plant tailing predominantly containing lizardite. Maden Tetkik ve Arama Dergisi, Cilt: 164 - Sayı: 164, 251–259. https://ajindex.com/articles/132662

📄 Tam Metin PDF Okuyucu

📄

PDF görüntüleyici hazırlanıyor...

Kaynakça (10)

  1. Apostolidis, C.I., Distin, P.A. 1978. The kinetics of the sulphuric acid leaching of nickel andmagnesium fromreduction roasted serpentine. Hydrometallurgy 3, 181-96.
  2. Arce, G.L.A.F., Neto, T.G.S., Ávila, I., Luna, C.M.R., Carvalho, J.A. 2017. Leaching optimization of mining wastes with lizardite and brucite contents for use in indirect mineral carbonation through the pH swing method. Journal of Cleaner Production 141, 1324-1336. Bałdyga, J., Jasińska, M., Jodko, K., Petelski, P. 2012. Precipitation of amorphous colloidal silica from aqueous solutions-Aggregation problem. Chemical Engineering Science 77, 207-216.
  3. Bobicki, E.R., Liu, Q., Xu, Z., Zeng, H. 2012. Carbon capture and storage using alkaline industrial wastes. Progress in Energy and Combustion Science 38, 302-20.
  4. Daval, D., Hellmann, R., Martinez, I., Gangloff, S., Guyot, F. 2013. Lizardite serpentine dissolution kinetics as a function of pH and temperature, including effects of elevated pCO2. Chemical Geology 351, 245-256. Fedoročková, A., Hreus, M., Raschman, P., Sučik, G. 2012. Dissolution of magnesium from calcined serpentinite in hydrochloric acid. Minerals Engineering 32, 1-4. Fedoročková, A., Raschman, P., Sučik, G., Ivánová D., Kavuličová, J. 2016. Utilization of chrysotile- type tailings for synthesis of high-grade silica by controlled precipitation. Mineral Processing and Extractive Metallurgy Review 37(5), 287-294.
  5. Kulikovsky, V., Vorlíček, V., Boháč, P., Stranyánek, M., Čtvrtlík, R., Kurdyumov, A. 2008. Mechanical properties of amorphous and microcrystalline silicon films.Thin Solid Films 516(16),5368- 5375. Lacinska, A. M., Styles, M. T., Bateman, K., Wagner, D., Hall, M.R., Gowing, C., Brown, P. D. 2016. Acid-dissolution of antigorite, chrysotile and lizardite for ex situ carbon capture and storage by mineralization. Chemical Geology 437, 153-159.
  6. Levenspiel, O. 1972. Chemical Reaction Engineering. John Wiley and Sons.2,13-29.
  7. Liu, K., Chen, Q., Hu, H., Yin, Z. 2010. Characterization and leaching behaviour of lizardite in Yuanjiang laterite ore. Applied Clay Science 47, 311-316.
  8. Luce, R.W., Bartlett, R.W., Parks, G.A. 1972. Dissolution kinetics of magnesium silicates. Geochimica et Cosmochimica Acta 36, 35-50.
  9. Mevel, C. 2003. Serpentinization of abyssal peridotites at mid-ocean ridges. Comptes Rendus Geoscience 335(10-11), 825-852.
  10. Nduagu, E., Björklöf, T., Fagerlund, J., Wärnå, J., Geerlings, H., Zevenhoven, R. 2012. Production of magnesium hydroxide from magnesium silicate for the pu