KaydedilenlerDerginizi ekleyin

Dergiler / Uludağ Üniversitesi Mühendislik Fakültesi Dergisi / 2026 / Cilt: 22 Sayı: 2

DÜŞÜK SICAKLIKLI ATIK AKIŞKAN DESTEKLİ ORGANİK RANKİNE ÇEVRİMLERİNİN OPTİMİZASYONU

Optimization of Organic Rankine Cycle Systems Driven by the Low-Temperature Waste Heat Sources

Ahmet Serdar Önal
Akın Burak Etemoğlu
Muhiddin Can
Sayfa
35–52
Yayın Tarihi
2017-08-20
🏛️Bu makalenin bibliyografik verileri ve tam metin bağlantısı DergiPark üzerinden sağlanmıştır.
DergiPark Kaydı ↗
✨

Yapay Zeka Hızlı Bakış & Çıkarımlar

AI Insight
⚡ TL;DR(1 Cümlede Hızlı Çıkarım)

Finally, our study demonstrated that optimum fluids have been determined for different types of cycles and fluid pressure ranges.

📌 3 Maddede Bu Makale

🎯
Amaç & Hipotez:In this study, two different cycle systems on the base of Organic Rankine Cycle (ORC) have been designed for heat recovery from the industrial waste fluids at the low temperature to generate electricity using Engineering Equation Solver (EES).The designed cycles are Simple Organic Rankine Cycle (S-ORC) and Regenerative Organic Rankine Cycle (R-ORC).
📊
Temel Bulgular & Veri:Waste fluid input temperature and mass flow rate are fixed in each cycle.
💡
Sonuç & Katkı:Finally, our study demonstrated that optimum fluids have been determined for different types of cycles and fluid pressure ranges.
🔬Tür:Araştırma Makalesi
📍Kapsam:Genişletilmiş Akademik Örneklem
⚙️Değişkenler:Organik Rankine Çevrimi · ekserji analizi · organik iş akışkanı

Özet

In this study, two different cycle systems on the base of Organic Rankine Cycle (ORC) have been designed for heat recovery from the industrial waste fluids at the low temperature to generate electricity using Engineering Equation Solver (EES).The designed cycles are Simple Organic Rankine Cycle (S-ORC) and Regenerative Organic Rankine Cycle (R-ORC). Waste fluid input temperature and mass flow rate are fixed in each cycle. Organic working fluids such as isopentane, isobutane, R134a, R123, R245fa, R22, R13, propane and R600 have been investigated. In order to detect the optimum working fluid, first (T1K) and second law of thermodynamics (T2K) values have been analyzed for each fluid. Finally, our study demonstrated that optimum fluids have been determined for different types of cycles and fluid pressure ranges.

Abstract

In this study, two different cycle systems on the base of Organic Rankine Cycle (ORC) have been designed for heat recovery from the industrial waste fluids at the low temperature to generate electricity using Engineering Equation Solver (EES).The designed cycles are Simple Organic Rankine Cycle (S-ORC) and Regenerative Organic Rankine Cycle (R-ORC). Waste fluid input temperature and mass flow rate are fixed in each cycle. Organic working fluids such as isopentane, isobutane, R134a, R123, R245fa, R22, R13, propane and R600 have been investigated. In order to detect the optimum working fluid, first (T1K) and second law of thermodynamics (T2K) values have been analyzed for each fluid. Finally, our study demonstrated that optimum fluids have been determined for different types of cycles and fluid pressure ranges.

🔖

Bu Makaleye Atıf Yap

Önal, A. S., Etemoğlu, A. B., Can, M. (2017). DÜŞÜK SICAKLIKLI ATIK AKIŞKAN DESTEKLİ ORGANİK RANKİNE ÇEVRİMLERİNİN OPTİMİZASYONU. Uludağ Üniversitesi Mühendislik Fakültesi Dergisi, Cilt: 22 Sayı: 2, 35–52. https://doi.org/10.17482/uumfd.335423

📄 Tam Metin PDF Okuyucu

📄

PDF görüntüleyici hazırlanıyor...

Kaynakça (21)

  1. Bao, J. ve Zhao, L. (2013) A review of working fluid and expander selections for organic Rankine cycle, Renewable & Sustainable Energy Reviews, 24:325-342. doi:10.1016/j.rser.2013.03.040
  2. Çengel, Y. ve Boles, M.A. (1989) Thermodynamics: An Engineering Approach. McGraw Hill Book Co. International Edition, Singapore, 859 p.
  3. Dai, Y.P., Wang, J.F., Gao, L. (2009). Parametric optimization and comparative study of organic Rankine cycle (ORC) for low grade waste heat recovery, Energy Conversion and Management, 50(3):576-582. doi: 10.1016/j.enconman.2008.10.018
  4. Etemoglu, A.B. ve Can, M. (2007) Classification of geothermal resources in Turkey by exergy analysis, Renewable & Sustainable Energy Reviews, 11:1596-1606. doi: 10.1016/j.rser.2006.01.001
  5. Etemoglu, A.B. (2008) Thermodynamic evaluation of geothermal power generation systems in Turkey, Energy Sources, 30:905-916. doi:10.1080/15567030601082589
  6. Heberle, F. ve Brüggemann, D. (2010) Exergy based fluid selection for a geothermal Organic Rankine Cycle for combined heat and power generation, Applied Thermal Engineering, 30(11-12):1326-1332. doi:10.1016/j.applthermaleng.2010.02.012
  7. Hettiarachchi, H.D. M., Golubovic, M., Worek, W.M., Ikegami, Y. (2007) Optimum design criteria for an Organic Rankine cycle using low-temperature geothermal heat sources. Energy, 32(9): 1698-1706. doi:10.1016/j.energy.2007.01.005
  8. Lee, K. M., Kuo, S. F., Chien, M. L., Shih, Y. S. (1988) Parameters analysis on organic Rankine cycle energy recovery system, Energy Conversion and Management, 28 (2):129-136. doi:10.1016/0196-8904(88)90038-6
  9. Liu, B.T., Chien, K.H., Wang, C.C. (2004) Effect of working fluids on organic Rankine cycle for waste heat recovery, Energy, 29(8): 1207-1217. doi:10.1016/j.energy.2004.01.004
  10. Maizza, V. ve Maizza, A. (2001) Unconventional working fluids in organic Rankine-cycles for waste energy recovery systems, Applied Thermal Engineering, 21(3): 381-390. doi:10.1016/S1359-4311(00)00044-2
  11. Najjar, Y. S.H., Radhwan, A.M. (1988) Cogeneration by combining gas turbine engine with organic Rankine cycle, Heat Recovery Systems and CHP, 8 (3): 211-219. doi:10.1016/0890-4332(88)90057-9
  12. Önal, A.S. (2011) Düşük sıcaklıklı atık akışkan destekli güç üretim sistemlerinin optimizasyonu, Uludağ Üniversitesi Fen Bilimleri Enstitüsü, Yüksek Lisans Tezi, 114 s.
  13. Roy, J.P., Mishra, M.K., Misra, A. (2010) Parametric optimization and performance analysis of a waste heat recovery system using Organic Rankine Cycle, Energy, 35(12): 5049-5062. doi:10.1016/j.energy.2010.08.013
  14. Schuster, A., Karellas, S., Kakaras, E., Spliethoff, H. (2009) Energetic and economic investigation of Organic Rankine Cycle applications, Applied Thermal Engineering, 29(8-9): 1809-1817. doi:10.1016/j.applthermaleng.2008.08.016
  15. Stoecker, W.F. (1989) Design of Thermal Systems, McGraw Hill Book Co., Singapore, 565 p.
  16. Sun, J. ve Li,W. (2011) Operation optimization of an organic Rankine cycle (ORC) heat recovery power plant, Applied Thermal Engineering, 31(11-12): 2032-2041. doi:10.1016/j.applthermaleng.2011.03.012
  17. Wei, D., Lu, X., Lu, Z., Gu, J. (2007) Performance analysis and optimization of organic Rankine cycle (ORC) for waste heat recovery, Energy Conversion and Management, 48(4): 1113-1119. doi:10.1016/j.enconman.2006.10.020
  18. Wongwises, S ve Chimres, N. (2005) Experimental study of hydrocarbon mixtures to replace HFC-134a in a domestic refrigerator, Energy Conversion and Management, 46(1):85-100.doi:10.1016/j.enconman.2004.02.011
  19. Liu, B.T., Chien, K.H., Wang, C.C. (2004) Effect of working fluids on organic Rankine cycle for waste heat recovery, Energy, 29(8): 1207-1217. doi:10.1016/j.energy.2004.01.004
  20. Roy, J.P., Mishra, M.K., Misra, A. (2010) Parametric optimization and performance analysis of a waste heat recovery system using Organic Rankine Cycle, Energy, 35(12): 5049-5062. doi:10.1016/j.energy.2010.08.013
  21. Schuster, A., Karellas, S., Kakaras, E., Spliethoff, H. (2009) Energetic and economic investigation of Organic Rankine Cycle applications, Applied Thermal Engineering, 29(8-9): 1809-1817. doi:10.1016/j.applthermaleng.2008.08.016