Dergiler / Niğde Ömer Halisdemir Üniversitesi Mühendislik Bilimleri Dergisi / 2024 / Cilt: 13 Sayı: 2

Torna talaşı atıklarından demir oksit esaslı aerojel tozu üretimi ve karakterizasyonu

Production and characterization of iron oxide based aerogel from steel sawdust waste

Ahmet Furkan Coşkun(SAKARYA ÜNİVERSİTESİ)0009-0008-1927-725X
Melih Tümer(SAKARYA ÜNİVERSİTESİ)0000-0002-6918-0447
Zafer Yavuz Merkit(Sakarya University, Engineering Faculty, Department of Metallurgy and Materials Engineering, Serdivan, Sakarya, Turkey)0000-0002-5549-5229
Nil Toplan(SAKARYA ÜNİVERSİTESİ, MÜHENDİSLİK FAKÜLTESİ)0000-0003-4130-0002
Sayfa
665–671
Yayın Tarihi
2024-04-15
🏛️Bu makalenin bibliyografik verileri ve tam metin bağlantısı DergiPark üzerinden sağlanmıştır.
DergiPark Kaydı ↗
✨

Yapay Zeka Hızlı Bakış & Çıkarımlar

AI Insight
⚡ TL;DR(1 Cümlede Hızlı Çıkarım)

Elde edilen demir oksit aerojel tozunun XRD ile faz analizi, SEM ve EDS görüntüleri ile mikroyapı analizi, Zeta potansiyeli ile ortalama tane boyut ve potansiyel aralıkları ve FTIR ile bağ yapıları karakterize edilmiştir.

📌 3 Maddede Bu Makale

🎯
Amaç & Hipotez:Mevcut çalışmada metal oksit aerojeller grubunun bir üyesi konumunda olan demir oksit aerojellerin torna talaşı atıklarından üretilebilirliği incelenmiştir.
📊
Temel Bulgular & Veri:Bu amaçla halkalı değirmende öğütülerek ince taneli boyuta getirilmiş torna talaş atıkları, asitte çözdürülüp baz ile nötralize edilmiş ve jelleşmeye bırakılmıştır.
💡
Sonuç & Katkı:Elde edilen demir oksit aerojel tozunun XRD ile faz analizi, SEM ve EDS görüntüleri ile mikroyapı analizi, Zeta potansiyeli ile ortalama tane boyut ve potansiyel aralıkları ve FTIR ile bağ yapıları karakterize edilmiştir.
🔬Tür:Araştırma Makalesi
📍Kapsam:Genişletilmiş Akademik Örneklem
⚙️Değişkenler:Demir Oksit Aerojel · Metal oksit aerojel · Torna Talaşı Atığı

Özet

Mevcut çalışmada metal oksit aerojeller grubunun bir üyesi konumunda olan demir oksit aerojellerin torna talaşı atıklarından üretilebilirliği incelenmiştir. Bu amaçla halkalı değirmende öğütülerek ince taneli boyuta getirilmiş torna talaş atıkları, asitte çözdürülüp baz ile nötralize edilmiş ve jelleşmeye bırakılmıştır. Jelleşme süreci sonunda jel kaynar saf ile yıkanarak demir oksit esaslı aerojel tozu elde edilmiştir. Elde edilen demir oksit aerojel tozunun XRD ile faz analizi, SEM ve EDS görüntüleri ile mikroyapı analizi, Zeta potansiyeli ile ortalama tane boyut ve potansiyel aralıkları ve FTIR ile bağ yapıları karakterize edilmiştir.

Abstract

In the present study, the producibility of iron oxide aerogels, which is a member of the metal oxide aerogels group, from lathe waste was investigated. For this purpose, lathe sawdust wastes, which were ground in a ring mill and made fine-grained, were dissolved in acid, neutralized with base and left to gel. At the end of the gelation process, iron oxide aerogel powder was obtained by washing the gel with boiling distilled water. The iron oxide aerogel powder was analyzed for phase, microstructure, average grain size, potential ranges, and bond structures using XRD, SEM and EDS images, Zeta potential, and FTIR, respectively.

🔖

Bu Makaleye Atıf Yap

Coşkun, A. F., Tümer, M., Merkit, Z. Y., Toplan, H. Ö., Toplan, N. (2024). Torna talaşı atıklarından demir oksit esaslı aerojel tozu üretimi ve karakterizasyonu. Niğde Ömer Halisdemir Üniversitesi Mühendislik Bilimleri Dergisi, Cilt: 13 Sayı: 2, 665–671. https://doi.org/10.28948/ngumuh.1409401

📄 Tam Metin PDF Okuyucu

📄

PDF görüntüleyici hazırlanıyor...

Kaynakça (30)

  1. A. Ghanbariasad, S. M. Taghizadeh, P. L. Show, S. Nomanbhay, A. Berenjian, Y. Ghasemi and A. Ebrahiminezhad, Controlled synthesis of iron oxyhydroxide (FeOOH) nanoparticles using secretory compounds from Chlorella vulgaris microalgae. Bioengineered, 10 (1), 390-396, 2019. https:// doi.org/10.1080/21655979.2019.1661692.
  2. M. Mohapatra and S. Anand, Synthesis and applications of nano-structured iron oxides/hydroxides a review. International Journal of Engineeering Science and Technology, 2 (8), 127-146, 2011. htpss://doi.org/ 10.4314/ijest.v2i8.63846.
  3. M. H. Khedr, K. S. A. Halim and N. K. Soliman, Synthesis and photocatalytic activity of nano-sized iron oxides. Materials Letters, 63 (6-7), 598-601, 2009. https://doi.org/10.3390/ijms161024174.
  4. A. Jaiswal, S. Banerjee, R. Mani and M. C. Chattopadhyaya, Journal of environmental chemical engineering synthesis, characterization and application of goethite mineral as an adsorbent. Biochemical Pharmacology, 1 (3), 281-289, 2013. htpss://doi.org/ 10.1016/j.jece.2013.05.007.
  5. M. Roberts, P. Srivastava, G. Webster, A. J. Weightman and D. J. Sapsford, Biostimulation of jarosite and Iron Oxide-bearing mine waste enhances subsequent metal recovery. Journal of Hazardous Materials, 445, 130498, 2022. https://doi.org/10.1016/ j.jhazmat.2022. 130498.
  6. M. A. Legodi and D. De Waal, The preparation of magnetite, goethite, hematite and maghemite of pigment quality from mill scale iron waste. Dyes and Pigments, 74 (1), 161-168 2007. https://doi.org/ 10.1016/j.dyepig.2006.01.038.
  7. M. Raffaella, L. Zoli and E. Sani, Synthesis and characterization of goethite (α-FeOOH) magnetic nanofluids. International Journal of Thermofluids, 15, 100169, 2022. https://doi.org/10.1016/j.dyepig.2006. 01.038.
  8. M. Zhao, C. Liu, F. Liu, D. Jing, Y. Dong, L. Wang and L. Ren, Adhesion effect and mechanism of siderophore-producing bacteria onto goethite and boron-doped goethite. Colloids and Interface Science Communication, 51, 100680, 2022. https://doi.org/ 10.1016/j.colcom.2022.100680.
  9. M. Arakha, S. Pal, D. Samantarrai, T. K. Panigrahi, B. C. Mallick, K. Pramanik, B. Mallick and S. Jha, Antimicrobial activity of iron oxide nanoparticle upon modulation of nanoparticle-bacteria interface. Scientific Reports, 5, 14813, 1-12, 2015. https:// doi.org/10.1038/srep14813.
  10. T. R. Pisanic, J. D. Blackwell, V. I. Shubayev, R. R. Fiñones and S. Jin, Nanotoxicity of iron oxide nanoparticle internalization in growing neurons. Biomaterials, 28 (16), 2572-2581, 2007. htpps:// doi.org/10.1016/j.biomaterials.2007.01.043.
  11. H. Wu, J. J. Yin, W. G. Wamer, M. Zeng and Y. M. Lo, Reactive oxygen species-related activities of nano-iron metal and nano-iron oxides. Journal of Food and Drug Analysis, 22 (1), 86-94, 2014. https://doi.org/10.1016/ j.jfda.2014.01.007.
  12. S. Saqib, M. F. H. Munis, W. Zaman, F. Ullah, S. N. Shah, A. Ayaz, M. Farooq and S. Bahadur, Synthesis characterization and use of iron oxide nano particles for antibacterial activity. Microscopy Research and Technique, 82 (4), 415-420, 2018. https://doi.org/10.1002/jemt.23182.
  13. J. Alonso, J. R. Gallego, M. C. Lobo, M. Gil-díaz and D. Baraga, Zero valent iron and goethite nanoparticles as new promising remediation techniques for As-polluted soils. Chemosphere, 238, 124624 2020. https://doi.org/10.1016/j.chemosphere.2019.124624.
  14. W. Li and X. Liu, Applied geochemistry systematic investigations on iron cycling in phosphorus/ siderophore systems: Synergism or antagonism?. Applied Geochemistry, 124, 104796, 2021. https:// doi.org/10.1016/j.apgeochem.2020.104796.
  15. J. K. Yoo, H. J. Kong, R. Wagle, B. H. Shon, I. K. Kim and T. H. Kim, A study on the methods for making iron oxide aerogel. Journal of Industrial and Engineering Chemistry, 72, 332-337, 2019. https://doi.org/10.1016/ j.jiec.2018.12.033.
  16. F. E. Huggins, S. Bali, G. P. Huffman and E. M. Eyring, Iron-oxide aerogel and xerogel catalyst formulations: Characterization by 57Fe Mössbauer and XAFS spectroscopies. Spectrochimica Acta Part A: Molecular and Biomolecular Spectroscopy, 76 (1), 74-83, 2010. https://doi.org/10.1016/j.saa.2010.02.049.
  17. A. Tav, Y. Oz and H. I. Akyildiz, Formation and thermo-physical properties of aerogel ceramic blanket composites synthesized via scalable atmospheric pressure process with methyltrimethoxysilane precursor. Journal of Porous Materials, 31(1), 317-334, 2023. https://doi.org/10.1007/s10934-023-01521-4.
  18. A. Khaleel and A. Al-Marzouqi, Alkoxide-free sol-gel synthesis of aerogel iron-chromium mixed oxides with unique textural properties. Materials Letters, 68, 385-387, 2012. https://doi.org/10.1016/j.matlet.2011.11.
  19. A. Tav, Y. Öz and H. İ. Akyıldız, Thermal and mechanical properties of sol-gel silica coated fabrics. Avrupa Bilim ve Teknoloji Dergisi. 31, 309-319, 2021. https:// doi.org/10.31590/ejosat.1000774.
  20. Ş. Ş. Koçer, Alümina esaslı hammadde ve atıklardan alümina esaslı aerojel tozu üretimi ve karakterizasyonu. Yüksek Lisans Tezi, Sakarya Üniversitesi Fen Bilimleri Enstitüsü, Türkiye, 2019.
  21. R. Arslan, G. Eğribel, E. Mudam and N. Toplan, Preparation of silica aerogel by ambient pressure drying process using diatomite powder. 19. Uluslararası Metalurji ve Malzeme Kongresi (IMMC2018), sayfa 614-617, İstanbul, Türkiye, 25-27 Ekim 2018.
  22. K.N. Maamur, U. S. Jais and S. Y. S. Yahya., Magnetic phase development of iron oxide‐SiO2 aerogel and xerogel prepared using rice husk ash as precursor. AIP Conference Proceedings. 1217 (1), 2010, https:// doi.org/10.1063/1.3377832.
  23. J. W. Jeffrey, M. S. Logan, C. P. Rhodes, E. E. Carpenter, R. M. Stroud and D. R. Rolison, Nanocrystalline iron oxide aerogels as mesoporous magnetic architectures. Journal of the American Chemical Society, 126 (51), 16879-16889, 2004. https://doi.org/10.1021/ja046044f.
  24. E. M. Moreno, M. Zayat, M. P. Morales, C.J. Serna, A. Roig and D. Levy, Preparation of narrow size distribution superparamagnetic γ-Fe2O3 nanoparticles in a sol-gel transparent SiO2 matrix. Langmuir, 18 (12), 4972-4978, 2002. https://doi.org/10.1021/la020037s.
  25. H. Cui, W. Ren, P. Lin and Y. Liu, Structure control synthesis of iron oxide polymorph nanoparticles through an epoxide precipitation route. Journal of Experimental Nanoscience, 8 (7-8), 869-875, 2013. https://doi.org/10.1080/17458080.2011.616541.
  26. D. Vernekar and D. Jagadeesan, Tunable acid-base bifunctional catalytic activity of FeOOH in an orthogonal tandem reaction. Catalysis Science and Technology, 5 (8), 4029-4038, 2015. https://doi.org/ 10.1039/C5CY00361J.
  27. N. H. Dang, T. H. Tu, V. N. P. Linh, L. T. M. Thy, H. M. Nam, M. T. Phong and N.H. Hieu, Preparation of magnetic iron oxide/graphene aerogel nanocomposites for removal of bisphenol A from water. Synthetic Metals, 255, 116-106, 2019. https://doi.org/10.1016/ j.synthmet.2019.116106.
  28. L.Tankosić, P.Tančić, S.Sredić and Z. Nedić, Comparative study of the mineral composition and its connection with some properties important for the sludge flocculation process-examples from Omarska Mine. Minerals, 8 (3), 119, 2018. https://doi.org/10. 3390/min8030119.
  29. K. Shrimali, J. Jin, B.V. Hassas, X.Wang and J.D. Miller, The surface state of hematite and its wetting characteristics. Journal of colloid and interface science, 477, 16-24, 2016. https://doi.org/10.1016/ j.jcis.2016.05.030.
  30. J. Balachandramohan, M. Kumar, T. Sivasankar and M. Sivakumar, Natural Polymer-Based Iron Oxide (Fe3O4) synthesis, characterization and Its application for 1-Amino-Nitrobenzene degradation in assistance with oxidants. Catalysts, 12(10), 1161, 2022. https://doi.org/ 10.3390/catal12101161.