KaydedilenlerDerginizi ekleyin

Dergiler / Mugla Journal of Science and Technology / 2026 / Volume: 6 Issue: 1

UTILIZATION OF MUĞLA FLY ASH AND QUARTZ DUST IN ENGINEERED CEMENTITIOUS COMPOSITES PRODUCTION AT HIGH VOLUMES

Süleyman Bahadır Keskin(Muğla Sıtkı Koçman Üniversitesi, Mühendislik Fakültesi,)0000-0002-2802-5379
Olkan Taş(Muğla Sıtkı Koçman Üniversitesi Mühendislik Fakültesi)0000-0001-9668-6059
Özlem Kasap Keskin(Muğla Sıtkı Koçman Üniversitesi Mühendislik Fakültesi)0000-0003-4475-2186
Sayfa
—
Yayın Tarihi
2020-06-30
🏛️Bu makalenin bibliyografik verileri ve tam metin bağlantısı DergiPark üzerinden sağlanmıştır.
DergiPark Kaydı ↗
✨

Yapay Zeka Hızlı Bakış & Çıkarımlar

AI Insight
⚡ TL;DR(1 Cümlede Hızlı Çıkarım)

Mechanical strength values and self-healing properties of the specimens were investigated at the scope of the study.

📌 3 Maddede Bu Makale

🎯
Amaç & Hipotez:Concrete, because of its brittle nature, is very prone to cracking especially under induced tensile stresses.
📊
Temel Bulgular & Veri:Water penetrating through the cracks yields various durability issues that shorten the service life of the concrete.
💡
Sonuç & Katkı:Mechanical strength values and self-healing properties of the specimens were investigated at the scope of the study.
🔬Tür:Research Article
📍Kapsam:Genişletilmiş Akademik Örneklem
⚙️Değişkenler:Engineered Cementitious Composites (ECC) · Fiber Reinforced High Performance Cementitious Composites · Self-Healing

Abstract

Concrete, because of its brittle nature, is very prone to cracking especially under induced tensile stresses. Those cracks make the material vulnerable to external influences. Water penetrating through the cracks yields various durability issues that shorten the service life of the concrete. However, contrary to ordinary concrete, in Engineered Cementitious Composites (ECC) formation of multiple and tight micro-cracks under loading yields to high ductility, energy absorption capacity and durability. Besides, these tiny cracks also exhibit self-healing properties with the help of a high amount of binding materials available in composite composition. Within the scope of this study, in the design of the ECC, two different mixtures with low and high fly ash amounts were produce. Furthermore, waste materials of the Muğla region which cause environmental pollution and have little or no commercial value were used in ECC production. Mechanical strength values and self-healing properties of the specimens were investigated at the scope of the study.

🔖

Bu Makaleye Atıf Yap

Keskin, S. B., Taş, O., Keskin, Ö. K. (2020). UTILIZATION OF MUĞLA FLY ASH AND QUARTZ DUST IN ENGINEERED CEMENTITIOUS COMPOSITES PRODUCTION AT HIGH VOLUMES. Mugla Journal of Science and Technology, Volume: 6 Issue: 1. https://doi.org/10.22531/muglajsci.673036

📄 Tam Metin PDF Okuyucu

📄

PDF görüntüleyici hazırlanıyor...

Kaynakça (28)

  1. Gohil, B.D. and Parikh K.B. (2016) Study on Engineered Cementitious Composites with Different Fibres: A Critical Review, Int J Inno Eng Technol, 6: 366-370
  2. Deshpande, U.L. and Murnal P.B. (2016) Ductile Concrete Using Engineered Cementitious Composites, Int. J. Eng. Res. Sci., 5: 756-760
  3. Keskin, S.B., Sahmaran, M., Yaman, I.O. and Lachemi, M. (2014) Correlation between the viscoelastic properties and cracking potential of engineered cementitious composites, Constr Build Mater, 71: 375-383
  4. Sahmaran, M., Yildirim G. and Erdem T.K. (2013) Self-healing capability of cementitious composites incorporating different supplementary cementitious materials, Cem Concr Compos, 35: 89-101
  5. Bentur, A. and Mindess S. (2007) Fiber Reinforced Cementitious Composites, 2nd Ed., Taylor & Francis, New York, 625
  6. Mauney, M. “History of Asbestos” Date of access: 7.2.2018,https://www.asbestos.com/asbestos/history/
  7. Mobasher, B. and Yu Li, C., (1996) Mechanical properties of hybrid cement-based composites, ACI Mater J, May-June, 284-287
  8. Beglarigale, A. and Yazıcı, H. (2015) Çimento Esaslı Kompozzitlerde Lif matris Aderansına Kür Koşullarının Etkisinin İncelenmesi, 9. Ulusal Beton Kongresi, 13 December 2016, Antalya, 517-526
  9. Brandt, A.M. (2009) Concrete like composites, 39-42, Cement-based Composites: Materials, Mechanical Properties and Performance, Taylor & Francis, New York
  10. Khan, M.I., Abbas, Y.M. and Fares G. (2017) Review of high and ultrahigh performance cementitious composites incorporating various combinations of fibers and ultra-fines, J King Saud Univ Sci– Engineering Sciences
  11. Song, G. (2005) Matrix Manipulation to Study ECC Behaviour, MSc Thesis, University of Stellenbosch
  12. Zhang, Q. and Li, V.C. (2014) Adhesive bonding of fire-resistive engineered cementitious composites (ECC) to steel, Constr Build Mater, 64: 431–439
  13. Yang, E.H., Yang, Y. and Li, V. (2007) Use of High Volumes of Fly Ash to Improve ECC Mechanical Properties and Material Greenness, ACI Mater J, Title no. 104-M68, 303-311
  14. Merchant, B. and Gelot, A. (2015) Evaluation of engineering cementitious composites (ECC) with different percentage of fibers, Int. J. of Eng. Res. Technol., 4: 40-43
  15. Akkari, A. (2011) Evaluation of a Polyvinyl Alcohol Fiber Reinforced Engineered Cementitious Composite for a Thin-Bonded Pavement Overlay, Minnesota Dep. of Transportation, Research Project Final Report 2011-11
  16. Li, V.C. (2008) Engineered Cementitious Composites (ECC) - Material, Structural, and Durability Performance, Concrete Construction Engineering Handbook, Chapter 24, Ed. Nawy E., published by CRC Press
  17. Keskin, S.B. (2012) Dimensional Stability of Engineered Cementitious Composites, PhD Thesis, Middle East Technical University, Ankara, 165
  18. Tittelboom, K. V. and Belie, N. D. (2013) Self-Healing in Cementitious Materials - A Review,Mat., 6: 2182-2217
  19. Yildirim, G., Kasap Keskin, Ö., Keskin, S.B., Sahmaran M. and Lachemi M. (2015) A review of intrinsic self-healing capability of engineered cementitious composites: Recovery of transport and mechanical properties, Constr Build Mater, 101: 10–21
  20. Reinhardt, H.W., Jonkers, H. K., Tittelboom, V., Snoeck, D, Belie,. N. D., Muynck, W. D., Verstraete, W., Wang, J and Mechtcherine, V. (2013) Self-Healing Phenomena in Cement-Based Materials, RILEM 11: 65–117.
  21. ASTM C618-19, Standard Specification for Coal Fly Ash and Raw or Calcined Natural Pozzolan for Use in Concrete, ASTM International, West Conshohocken, PA, 2019, www.astm.org
  22. ASTM C494 / C494M-17, Standard Specification for Chemical Admixtures for Concrete, ASTM International, West Conshohocken, PA, 2017, www.astm.org
  23. ASTM C1260-14, Standard Test Method for Potential Alkali Reactivity of Aggregates (Mortar-Bar Method), ASTM International, West Conshohocken, PA, 2014, www.astm.org
  24. ASTM C109 / C109M-16a, Standard Test Method for Compressive Strength of Hydraulic Cement Mortars (Using 2-in. or [50-mm] Cube Specimens), ASTM International, West Conshohocken, PA, 2016, www.astm.org
  25. ASTM C1202-17a, Standard Test Method for Electrical Indication of Concrete's Ability to Resist Chloride Ion Penetration, ASTM International, West Conshohocken, PA, 2017, www.astm.org
  26. ASTM C597-16, Standard Test Method for Pulse Velocity Through Concrete, ASTM International, West Conshohocken, PA, 2016, www.astm.org
  27. ASTM C1585-13, Standard Test Method for Measurement of Rate of Absorption of Water by Hydraulic-Cement Concretes, ASTM International, West Conshohocken, PA, 2016, www.astm.org
  28. Reinhardt, H.W., Jonkers, H. K., Tittelboom, V., Snoeck, D, Belie,. N. D., Muynck, W. D., Verstraete, W., Wang, J and Mechtcherine, V. (2013) Self-Healing Phenomena in Cement-Based Materials, RILEM 11: 65–117.