Dergiler / Bor Dergisi / 2025 / Cilt: 10 Sayı: 1

Fe3+'nin Seçici Tespiti için Yeni Bir Bor Nitrür Kuantum Noktaları Esaslı Floresan Algılama Platformu

A Novel Boron Nitride Quantum Dots-based Fluorescent Sensing Platform for Selective Detection of Fe3+

Duygu Kuru(BİLECİK ŞEYH EDEBALİ ÜNİVERSİTESİ)0000-0002-9727-5785
Sayfa
10–18
Yayın Tarihi
2025-04-01
🏛️Bu makalenin bibliyografik verileri ve tam metin bağlantısı DergiPark üzerinden sağlanmıştır.
DergiPark Kaydı ↗
✨

Yapay Zeka Hızlı Bakış & Çıkarımlar

AI Insight
⚡ TL;DR(1 Cümlede Hızlı Çıkarım)

Bu nedenle, bu floresan algılama platformu, 4,06 µM’lik bir sınır tespiti (LOD) ile 0-60 µM konsantrasyon aralığında seçici ve hassas olabilmektedir.

📌 3 Maddede Bu Makale

🎯
Amaç & Hipotez:Bu çalışmada, metal sensör malzemesi olarak kullanılmak üzere bor nitrür kuantum noktaları (BNQDs) ve polimetil metakrilat (PMMA) nanokompozit filmleri üretilmiştir.
📊
Temel Bulgular & Veri:PMMA/BNQDs nanokompozit filmleri floresan algılama platformu olarak seçiciliği farklı metal iyonları (Fe3+, Na+ Zn2+, Mg2+ ve Ca2+) için test edilmiştir.
💡
Sonuç & Katkı:Bu nedenle, bu floresan algılama platformu, 4,06 µM’lik bir sınır tespiti (LOD) ile 0-60 µM konsantrasyon aralığında seçici ve hassas olabilmektedir.
🔬Tür:Araştırma Makalesi
📍Kapsam:Genişletilmiş Akademik Örneklem
⚙️Değişkenler:bor nitrür kuantum noktaları · floresan algılama platformu · metal iyon algılama

Özet

Bu çalışmada, metal sensör malzemesi olarak kullanılmak üzere bor nitrür kuantum noktaları (BNQDs) ve polimetil metakrilat (PMMA) nanokompozit filmleri üretilmiştir. BNQD’ler borik asit ve üre kullanılarak hidrotermal yöntemle sentezlenmiştir. PMMA/BNQDs nanokompozit filmleri floresan algılama platformu olarak seçiciliği farklı metal iyonları (Fe3+, Na+ Zn2+, Mg2+ ve Ca2+) için test edilmiştir. Üretilen filmlerin morfolojik, yapısal ve kimyasal özellikleri taramalı elektron mikroskobu (SEM), yüksek çözünürlüklü geçirimli elektron mikroskobu (HRTEM), fourier dönüşümlü kızılötesi (FT-IR) ve atomik kuvvet mikroskobu (AFM) analizleri ile belirlenmiştir. Filmlerin optik özellikleri ultraviyole görünür bölge spektrofotometresi (UV-Vis) ile gerçekleştirilmiştir. Floresan ve algılama özellikleri fotolüminesans (PL) spektroskopisi analizi ile gerçekleştirilmiştir. SEM ve TEM analizleri, BNQD'ler ve PMMA arasındaki güçlü bağlanmayı ve homojen dağılımı doğrulamıştır. FT-IR ve TEM analizleri, BNQD’lerin oluşumunu kanıtlamıştır. PMMA-BNQD nanokompozit filmi, Fe3+ iyonları için seçici floresan söndürme özellikleri göstermiştir. Nanokompozit filmlerin floresan yoğunluğu, Fe3+ için 0-60 µM arasında iyi bir doğrusal ilişki göstermiştir. Ayrıca, içme suyundaki Fe3+ iyonlarını tespit etmede iyi bir hassasiyet sunmuştur. Bu nedenle, bu floresan algılama platformu, 4,06 µM’lik bir sınır tespiti (LOD) ile 0-60 µM konsantrasyon aralığında seçici ve hassas olabilmektedir.

Abstract

In this study, boron nitride quantum dots (BNQDs) and polymethyl methacrylate (PMMA) nanocomposite films were produced to be used as a metal sensing material. BNQDs were synthesized from boric acid and urea using the hydrothermal method. The selectivity of PMMA/BNQDs nanocomposite films as fluorescent sensing platforms was tested for different metal ions (Fe3+, Na+ Zn2+, Mg2+, and Ca2+). The morphological, structural, and chemical properties of the produced films were determined by scanning electron microscope (SEM), high-resolution transmission electron microscopy (HRTEM), Fourier transform infrared (FT-IR) spectroscopy, and atomic force microscopy (AFM) analyses. The optical properties of the films were determined by ultraviolet-visible spectrophotometer (UV-Vis). Fluorescence and sensing properties were determined using photoluminescence (PL) spectroscopy analysis. SEM and transmission electron microscopy (TEM) analyses confirmed the strong bonding and homogeneous distribution between the BNQDs and the PMMA. FT-IR and TEM analyses proved the formation of BNQDs. PMMA-BNQDs nanocomposite film showed selective fluorescence quenching properties for Fe3+ ions. The fluorescence intensity of the nanocomposite films showed a good linear relationship between 0-60 μM for Fe3+. In addition, it showed good sensitivity to detect Fe3+ ions in drinking water. Thus, this fluorescent sensing platform can be selective and sensitive in the 0-60 μM concentration range with a limit of detection (LOD) of 4.06 μM.

🔖

Bu Makaleye Atıf Yap

Kuru, D. (2025). Fe3+'nin Seçici Tespiti için Yeni Bir Bor Nitrür Kuantum Noktaları Esaslı Floresan Algılama Platformu. Bor Dergisi, Cilt: 10 Sayı: 1, 10–18. https://doi.org/10.30728/boron.1556075

📄 Tam Metin PDF Okuyucu

📄

PDF görüntüleyici hazırlanıyor...

Kaynakça (51)

  1. Dawoud, H. D., Saleem, H., Alnuaimi, N. A., & Zaidi, S. J. (2021). Characterization and treatment technologies applied for produced water in Qatar. Water, 13(24), 3573. https://doi.org/10.3390/w13243573
  2. Soliman, M.N., Guen, F.Z., Ahmed, S.A., Saleem, H., & Zaidi, S.J. (2002) Environmental impact assessment of desalination plants in the gulf region. In V. Naddeo, K. H. Choo, M. Ksibi (Eds.), Water-energy-nexus in the ecological transition. Advances in science, technology & innovation (pp. 173-177). Springer, Cham. https://doi.org/10.1007/978-3-031-00808-5_41
  3. Saleem, H., Zaidi, S. J., Ismail, A. F., Goh, P. S., & Vinu, A. (2022). Recent advances in the application of carbon nitrides for advanced water treatment and desalination technology. Desalination, 542, 116061. https://doi.org/10.1016/j.desal.2022.116061
  4. Saud, A., Saleem, H., Munira, N., Shahab, A. A., Siddiqui, H. R., & Zaidi, S. J. (2023). Sustainable preparation of graphene quantum dots for metal ion sensing application. Nanomaterials, 13(1), 148. https://doi.org/10.3390/nano13010148
  5. Li, Q., Zhou, W., Yu, L., Lian, S., & Xie, Q. (2021). Perovskite quantum dots as a fluorescent probe for metal ion detection in aqueous solution via phase transfer. Materials Letters, 282, 128654. https://doi.org/10.1016/j.matlet.2020.128654
  6. Bian, S., Shen, C., Hua, H., Zhou, L., Zhu, H., Xi, F., … & Dong, X. (2016). One-pot synthesis of sulfur-doped graphene quantum dots as a novel fluorescent probe for highly selective and sensitive detection of lead(II). RSC Advances, 6(74), 69977-69983. https://doi.org/10.1039/C6RA10836A
  7. Huo, B., Liu, B., Chen, T., Cui, L., Xu, G., Liu, M., & Liu, J. (2017). One-step synthesis of fluorescent boron nitride quantum dots via a hydrothermal strategy using melamine as nitrogen source for the detection of ferric ions. Langmuir, 33(40), 10673-10678. https://doi.org/10.1021/acs.langmuir.7b01699
  8. Liu, B., Yan, S., Song, Z., Liu, M., Ji, X., Yang, W., & Liu, J. (2016). One-step synthesis of boron nitride quantum dots: Simple chemistry meets delicate nanotechnology. Chemistry A European Journal, 22(52), 18899-18907. https://doi.org/10.1002/chem.201603935
  9. Peng, D., Zhang, L., Li, F., Cui, W., Liang, R., & Qui, J. (2018). Facile and green approach to the synthesis of boron nitride quantum dots for 2,4,6-trinitrophenol sensing. ACS Applied Materials Interfaces, 10(8), 7315-7323. https://doi.org/10.1021/acsami.7b15250
  10. Wang, L., Zhang, Q., Su, P., Yu, L., Bu, Y., Yuan, C., & Wang, S. (2022). Excitation-dependent ratiometric fluorescence response to mercury ion based on single hexagonal boron nitride quantum dots. Analytica Chimica Acta, 1236, 340585. https://doi.org/10.1016/j.aca.2022.340585
  11. Han, Y., Niu, Y., Liu, M., Niu, F., & Xu, Y. (2019). A rational strategy to develop a boron nitride quantum dot-based molecular logic gate and fluorescent assay of alkaline phosphatase activity. Journal of Materials Chemistry B, 7(6), 897-902. https://doi.org/10.1039/C8TB02948B
  12. Yu, X., Yang, L., Zhao, T., Zhang, R., Yang, L., Jiang, C., … & Zhang, Z. (2017). Multicolorful ratiometricfluorescent test paper for determination of fluoride ions in environmental water. RSC Advances, 7(5), 53379-53384. https://doi.org/10.1021/am506558d
  13. Cheng, Z., Liu, X., Zhao, B., Liu, X., Yang, X., Zhang, X., & Feng, X. (2024). A portable europium complex-loaded fluorescent test paper combined with smartphone analysis for the on-site and visual detection of mancozeb in food samples. Food Chemistry, 458, 140311. https://doi.org/10.1016/j.foodchem.2024.140311
  14. Huang, T., Xu, Y., Meng, M., & Li, C. (2022). PVDF based molecularly imprinted ratiometric fluorescent test paper with improved visualization effect for catechol monitoring. Microchemical Journal, 178, 107369. https://doi.org/10.1016/j.microc.2022.107369
  15. Wang, C., Sun, Y., Jin, J., Xiong, Z., Li, D., Yao, J., & Liu, Y. (2018). Highly selective, rapid-functioning and sensitive fluorescent test paper based on graphene quantum dots for on-line detection of metal ions. Analytical Methods, 10(10), 1163-1171. https://doi.org/10.1039/C7AY02995K
  16. Dalal, C., Garg, A. K., Mathur, M., & Sonkar, S. K. (2022). Fluorescent polymer carbon dots for the sensitive-selective sensing of Fe3+ metal ions and cellular imaging. ACS Applied Nano Materials, 5(9), 12699-12710. https://doi.org/10.1021/acsanm.2c02544
  17. Shirani, M. P., Rezaei, B., Ensafi, A. A., & Ramezani, M. (2021). Development of an eco-friendly fluorescence nanosensor based on molecularly imprinted polymer on silica-carbon quantum dot for the rapid indoxacarb detection. Food Chemistry, 339, 127920.https://doi.org/10.1016/j.foodchem.2020.127920
  18. Ma, Y., Cao, X., Feng, X., Ma, Y., & Zou, H. (2007). Fabrication of super-hydrophobic film from PMMA with intrinsic water contact angle below 90. Polymer, 48(26), 7455-7460. https://doi.org/10.1016/j.polymer.2007.10.038
  19. Cui, Z., Martinez, A. P., & Adamson, D. H. (2015). PMMA functionalized boron nitride sheets as nanofillers. Nanoscale, 7(22), 10193-10197.https://doi.org/10.1039/C5NR00936G
  20. Liu, F., Li, Q., Li, Z., Liu, Y., Dong, L., Xiong, C., & Wang, Q. (2017). Poly(methyl methacrylate)/boron nitride nanocomposites with enhanced energy density as high temperature dielectrics. Composites Science and Technology, 142, 139-144.https://doi.org/10.1016/j.compscitech.2017.02.006
  21. Wang, Y., Zhu, Y., Huang, J., Cai, J., Zhu, J., Yang, X., & Li, C. (2017). Perovskite quantum dots encapsulated in electrospun fiber membranes as multifunctional supersensitive sensors for biomolecules, metal ions and pH. Nanoscale Horizons, 2(4), 225-232. https://doi.org/10.1039/C7NH00057J
  22. Wang, Q., Sun, G., Wei, S., Hao, W., & Yang, W. (2021). HPAMAM/PMMA composite electrospun film for cobalt ion detection in water environments. Materials Letters, 299, 130115. https://doi.org/10.1016/j.matlet.2021.130115
  23. Tajik, S., Beitollahi, H., Nejad, F. G., Dourandish, Z., Khalilzadeh, M. A., Jang, H. W., … & Shokouhimehr, M. (2021). Recent developments in polymer nanocomposite-based electrochemical sensors for detecting environmental pollutants. Industrial & Engineering Chemistry Research, 60(3), 1112-1136. https://doi.org/10.1021/acs.iecr.0c04952
  24. Emir, P., & Kuru, D. (2024). Boron nitride quantum dots/polyvinyl butyral nanocomposite films for the enhanced photoluminescence and UV shielding properties. Journal of Applied Polymer Science, 141(13), e55171. https://doi.org/10.1002/app.55171
  25. Yang, Y., Zhang, C., Huang, D., Zeng, G., Huang, J., Lai, C., … & Xiong, W. (2019). Boron nitride quantum dots decorated ultrathin porous g-C3N4: Intensified exciton dissociation and charge transfer for promoting visible-light-driven molecular oxygen activation. Applied Catalysis B: Environmental, 245, 87-99. https://doi.org/10.1016/j.apcatb.2018.12.049
  26. Liu, M., Xu, Y., Wang, Y., Chen, X., Ji, X., Niu, F., Song, Z., & Liu, J. (2017). Boron nitride quantum dots with solvent-regulated blue/green photoluminescence and electrochemiluminescent behavior for versatile applications. Advanced Optical Materials, 5(3), 1600661. https://doi.org/10.1002/adom.201600661
  27. Abdelsalam, H., & Zhang, Q. F. (2022). Properties and applications of quantum dots derived from two dimensional materials. Advances in Physics: X, 7(1), 2048966. https://doi.org/10.1080/23746149.2022.2048966
  28. Lv, G., Dai, X., Lu, G., Ye, L., Wang, G., & Zhou, L. (2023). Facile fabrication of portable electrospun poly(vinyl alcohol)/sulfur quantum dots film sensor for sensitive and selective detection of Fe3+. Optical Materials, 135, 113227.https://doi.org/10.1016/j.optmat.2022.113227
  29. Sekar, A., Yadav, R., & Basavaraj, N. (2021). Fluorescence quenching mechanism and the application of green carbon nanodots in the detection of heavy metal ions: A review. New Journal of Chemistry, 45(5), 2326-2360. https://doi.org/10.1039/D0NJ04878J
  30. Mohan Babu, M., Syam Prasad, P., Venkateswara Rao, P., Hima Bindu, S., Prasad, A., Veeraiah, N., & Özcan, M. (2020). Influence of ZrO2 addition on structural and biological activity of phosphate glasses for bone regeneration. Materials, 13(18), 4058.https://doi.org/10.3390/ma13184058
  31. Mthethwa, T. P., Moloto, M. J., Vries, A. D., & Matabola, K. P. (2011). Properties of electrospun CdS and CdSe filled poly(methyl methacrylate) (PMMA) nanofibres. Materials Research Bulletin, 46(4), 569-575. https://doi.org/10.1016/j.materresbull.2010.12.022
  32. Alqahtani, M. (2020). Effect of hexagonal boron nitride nanopowder reinforcement and mixing methods on physical and mechanical properties of self-cured PMMA for dental applications. Materials, 13(10), 2323. https://doi.org/10.3390/ma13102323
  33. Khan, F. A., Akhtar, S., Almohazey, D., Alomari, M., Almofty, S. A., Badr, I., & Elaissari, A. (2019). Targeted delivery of poly (methyl methacrylate) particles in colon cancer cells selectively attenuates cancer cell proliferation. Artificial Cells, Nanomedicine, and Biotechnology, 47(1), 1533-1542. https://doi.org/10.1080/21691401.2019.1577886
  34. Meng, X., Cui, H., Dong, J., Zheng, J., Zhu, Y., Wang, Z., … & Zhu, Z. (2013). Synthesis and electrocatalytic performance of nitrogen-doped macroporous carbons. Journal of Materials Chemistry A, 1, 9469-9476. https://doi.org/10.1039/C3TA10306D
  35. Pawar S., Rzeczkowski P. P., Pötschke P., Krause B., & Bose S. (2018). Does the processing method resulting in different states of an interconnected network of multiwalled carbon nanotubes in polymeric blend nanocomposites affect EMI shielding properties? ACS Omega, 3(5), 5771-5782. https://doi.org/10.1021/acsomega.8b00575
  36. Yoon, C., Yang, K. P., Kim, J., & Shin, K. (2020). Fabrication of highly transparent and luminescent quantum dot/polymer nanocomposite for light emitting diode using amphiphilic polymer-modified quantum dots. Chemical Engineering Journal, 382, 122792. https://doi.org/10.1016/j.cej.2019.122792
  37. Lin, L., Xu, Y., Zhang, S., Ross, I. M., Ong, A. C. M., & Allwood, D. A. (2014). Fabrication and luminescence of monolayered boron nitride quantum dots. Small, 10(1), 60-65. https://doi.org/10.1002/smll.201301001
  38. Poderys, V., Matulionyte, M., Selskis, A., & Rotomskis, R. (2011). Interaction of water-soluble cdte quantum dots with bovine serum albumin. Nanoscale Research Letters, 6(9). https://doi.org/10.1007/s11671-010-9740-9
  39. Wu, F., Tong, H., Wang, K., Wang, Z., Li, Z., Zhu, X., … & Wong, W. K. (2016). Synthesis, structural characterization and photophysical studies of luminescent Cu(I) heteroleptic complexes based on dipyridylamine. Journal of Photochemistry and Photobiology A: Chemistry, 318, 97-103. https://doi.org/10.1016/j.jphotochem.2015.12.003
  40. Upadhyay, P. K., Marpu, S. B., Benton, E. N., Williams, C. L., Telang, A., & Omary, M. A. (2018). A phosphorescent trinuclear gold(I) pyrazolate chemosensor for silver ion detection and remediation in aqueous media. Analytical Chemistry, 90(8), 4999-5006. https://doi.org/10.1021/acs.analchem.7b04334
  41. Yao, Q., Feng, Y., Rong, M., He, S., & Chen, X. (2017). Determination of nickel(II) via quenching of the fluorescence of boron nitride quantum dots. Mikrochima Acta, 184, 4217-4223. https://doi.org/10.1007/s00604-017-2496-5
  42. Chen, Y., Wu, Y., Bo, W., Wang, B., & Li, C. (2016). Facile synthesis of nitrogen and sulfur co-doped carbon dots and application for Fe(III) ions detection and cell imaging. Sensors and Actuators B: Chemical, 223, 689-696. https://doi.org/10.1016/j.snb.2015.09.081
  43. Ahmadian-Fard-Fini, S., Ghanbari, D., Amiri, O., & Salavati-Niasari, M. (2020). Electro-spinning of cellulose acetate nanofibers/fe/carbon dot as photoluminescence sensor for mercury (ii) and lead (ii) ions. Carbohydrate Polymers, 229, 115428-115428. https://doi.org/10.1016/j.carbpol.2019.115428
  44. Islam, N. U., Amin, R., Shahid, M., Amin, M., Zaib, S., & Iqbal, J. (2017). A multi-target therapeutic potential of Prunus domestica gum stabilized nanoparticles exhibited prospective anticancer, antibacterial, ureaseinhibition, anti-inflammatory and analgesic properties. BMC Complementary and Alternative Medicine, 17(1), 276. https://doi.org/10.1186/s12906-017-1791-3
  45. Zhao, L., Wang, Y., Zhao, X., Deng, Y., & Xia, Y. (2019). Facile synthesis of nitrogen-doped carbon quantum dots with chitosan for fluorescent detection of Fe3+. Polymers, 11(11), 1731. https://doi.org/10.3390/polym11111731
  46. Rajaković, L. V., Marković, D. D., Rajaković-Ognjanović, V. N., & Antanasijević, D. Z. (2012). The approaches for estimation of limit of detection for ICP-MS trace analysis of arsenic. Talanta, 102, 79-87. https://doi.org/10.1016/j.talanta.2012.08.016
  47. Armbruster, D. A., & Pry, T. (2008). Limit of blank, limit of detection and limit of quantitation. The Clinical Biochemist Reviews, 29(Suppl 1), 49-52. Retrieved from https://pubmed.ncbi.nlm.nih.gov/18852857/
  48. Khairy, G. M., Amin, A. S., Moalla, S. M. N., Medhat, A., & Hassan, N. (2022). Fluorescence determination of Fe(III) in drinking water using a new fluorescence chemosensor. RSC Advances, 12(42), 27679-27686. https://doi.org/10.1039/d2ra05144c
  49. Liu, X., Li, N., Xu, M., Wang, J., Jiang, C., Song, G., & Wang, Y. (2018). Specific colorimetric detection of Fe3+ ions in aqueous solution by squaraine-based chemosensor. RSC Advances, 8(61), 34860-34866. https://doi.org/10.1039/C8RA07345G
  50. Gogoi, N., Barooah, M., Majumdar, G., & Chowdhury, D. (2015). Carbon dots rooted agarose hydrogel hybrid platform for optical detection and separation of heavy metal ions. ACS Applied Materials & Interfaces, 7(5), 3058-3067.https://doi.org/10.1021/am506558d
  51. Soliman, M.N., Guen, F.Z., Ahmed, S.A., Saleem, H., & Zaidi, S.J. (2002) Environmental impact assessment of desalination plants in the gulf region. In V. Naddeo, K. H. Choo, M. Ksibi (Eds.), Water-energy-nexus in the ecological transition. Advances in science, technology & innovation (pp. 173-177). Springer, Cham. https://doi.org/10.1007/978-3-031-00808-5_41