Dergiler / Erzincan Üniversitesi Fen Bilimleri Enstitüsü Dergisi / 2020 / Cilt: 13 Sayı: 3

Long term Fluoride Release of Newly Developed Alkasite Based Restorative Material

Edibe Egil(İSTANBUL GELİŞİM ÜNİVERSİTESİ)0000-0003-0889-0223
Sayfa
1281–1288
Yayın Tarihi
2020-12-31
🏛️Bu makalenin bibliyografik verileri ve tam metin bağlantısı DergiPark üzerinden sağlanmıştır.
DergiPark Kaydı ↗
✨

Yapay Zeka Hızlı Bakış & Çıkarımlar

AI Insight
⚡ TL;DR(1 Cümlede Hızlı Çıkarım)

It has been observed that Cention N can release fluoride in the long term just like Ketac Molar Easymix and Nova Glass LC glass ionomer cement.

📌 3 Maddede Bu Makale

🎯
Amaç & Hipotez:Abstract: Glass ionomer cement in dentistry prevents demineralization process through its fluoride release property and is effective in the induction of remineralization phase.
📊
Temel Bulgular & Veri:Three commercially available filling materials were tested for the present study: Traditional glass ionomer (Ketac Molar Easymix, 3M ESPE, Germany), resin modified glass ionomer (Nova Glass LC, Imicryl, Konya,Turkey) and Alkasite filling (Cention N, Ivoclar, Vivadent,Schaan, Liechtenstein).
💡
Sonuç & Katkı:It has been observed that Cention N can release fluoride in the long term just like Ketac Molar Easymix and Nova Glass LC glass ionomer cement.
🔬Tür:Araştırma Makalesi
📍Kapsam:Genişletilmiş Akademik Örneklem
⚙️Değişkenler:fuoride release · glass ionomer · alkasite filling

Abstract

Abstract: Glass ionomer cement in dentistry prevents demineralization process through its fluoride release property and is effective in the induction of remineralization phase. Being low of flexural strength of glass ionomer has caused the search for different materials that can release fluoride. In this study, fluoride release of new alkasite based filling material which has been developed as an alternative to glass ionomer cement has been evaluated. Three commercially available filling materials were tested for the present study: Traditional glass ionomer (Ketac Molar Easymix, 3M ESPE, Germany), resin modified glass ionomer (Nova Glass LC, Imicryl, Konya,Turkey) and Alkasite filling (Cention N, Ivoclar, Vivadent,Schaan, Liechtenstein). Fluoride release of three filling materials were measured at certain intervals for 63 days. Nova Glass LC, Ketac Molar easymix and Cention N released fluoride throughout the study. Fluoride releases of Nova Glass LC for the first 24 hours were significantly higher than Ketac Molar and Cention N group (p<0.05). It has been observed that Cention N can release fluoride in the long term just like Ketac Molar Easymix and Nova Glass LC glass ionomer cement.

🔖

Bu Makaleye Atıf Yap

Egil, E. (2020). Long term Fluoride Release of Newly Developed Alkasite Based Restorative Material. Erzincan Üniversitesi Fen Bilimleri Enstitüsü Dergisi, Cilt: 13 Sayı: 3, 1281–1288. https://doi.org/10.18185/erzifbed.816051

📄 Tam Metin PDF Okuyucu

📄

PDF görüntüleyici hazırlanıyor...

Kaynakça (17)

  1. Referans1 Bansal, R., & Bansal, T. (2015). A comparative evaluation of the amount of fluoride release and re-release after recharging from aesthetic restorative materials: An in vitro study. Journal of Clinical and Diagnostic Research, 9(8), ZC11–ZC14. https://doi.org/10.7860/JCDR/2015/11926.6278
  2. Referans2 Chen, X., Du, M. Q., Fan, M. W., Mulder, J., Huysmans, M. C. D. N. J. M., & Frencken, J. E. (2012). Caries-preventive effect of sealants produced with altered glass-ionomer materials, after 2 years. Dental Materials, 28(5), 554–560. https://doi.org/10.1016/j.dental.2012.01.001
  3. Referans3 Egil, E. (2020). Tuza, Süte Fluor Katılması ve Fluor Tabletleri. Türkiye Klinikleri Çocuk Diş Hekimliği - Özel Konular, 6(1), 7–10. Retrieved from https://www.turkiyeklinikleri.com/article/tr-tuza-sute-fluor-katilmasi-ve-fluor-tabletleri-89277.html
  4. Referans4 Garcez, R. M. V. D. B., Buzalaf, M. A. R., & De Araújo, P. A. (2007). Fluoride release of six restorative materials in water and pH-cycling solutions. Journal of Applied Oral Science, 15(5), 406–411. https://doi.org/10.1590/S1678-77572007000500006
  5. Referans5 Gupta, N., Jaiswal, S., Nikhil, V., Gupta, S., Jha, P., & Bansal, P. (2019). Comparison of fluoride ion release and alkalizing potential of a new bulk-fill alkasite. Journal of Conservative Dentistry, 22(3), 296. https://doi.org/10.4103/jcd.jcd_74_19
  6. Referans6 Kan, K. C., Messer, L. B., & Messer, H. H. (1997). Variability in cytotoxicity and fluoride release of resin-modified Glass-Ionomer Cements. Journal of Dental Research, 76(8), 1502–1507. https://doi.org/10.1177/00220345970760081301
  7. Referans7 Khoroushi, M., & Keshani, F. (2013). A review of glass-ionomers: From conventional glass-ionomer to bioactive glass-ionomer. Dental Research Journal, 10(4), 411–420. Retrieved from http://www.ncbi.nlm.nih.gov/pubmed/24130573
  8. Referans8 Lohbauer, U. (2010). Dental glass ionomer cements as permanent filling materials? -Properties, limitations and future trends. Materials, 3(1), 76–96. https://doi.org/10.3390/ma3010076
  9. Referans9 Mitra, S. B. (1991). Adhesion to Dentin and Physical Properties of a Light-cured Glass-ionomer Liner/Base. Journal of Dental Research, 70(1), 72–74. https://doi.org/10.1177/00220345910700011201
  10. Referans10 Moreau, J. L., & Xu, H. H. K. (2010). Fluoride releasing restorative materials: Effects of pH on mechanical properties and ion release. Dental Materials, 26(11). https://doi.org/10.1016/j.dental.2010.07.004
  11. Referans11 P, N. U., & Kishore, G. (2005). Glass ionomer cement - The different generations. Trends in Biomaterials and Artificial Organs, 18(2), 158–165. Retrieved from https://manipal.pure.elsevier.com/en/publications/glass-ionomer-cement-the-different-generations
  12. Referans12 Panpisut, P., & Toneluck, A. (2020). Monomer conversion, dimensional stability, biaxial flexural strength, and fluoride release of resin-based restorative material containing alkaline fillers. Dental Materials Journal, 39(4), 608–615. https://doi.org/10.4012/dmj.2019-020
  13. Referans13 Selimović-Dragaš, M., Hasić-Branković, L., Korać, F., Dapo, N., Huseinbegović, A., Kobašlija, S., … Hatibović-Kofman, Š. (2013). In vitro fluoride release from a different kind of conventional and resin modified glass-ionomer cements. Bosnian Journal of
  14. Referans14 Basic Medical Sciences, 13(3), 197–202. https://doi.org/10.17305/bjbms.2013.2362 Sidhu, S. K. (2011). Glass-ionomer cement restorative materials: A sticky subject? Australian Dental Journal, 56(SUPPL. 1), 23–30. https://doi.org/10.1111/j.1834-7819.2010.01293.x
  15. Referans15 Todd, J. (2016). Scientific Documantation: Cention N. Ivoclar Vivadent AG. Wiegand, A., Buchalla, W., & Attin, T. (2007, March 1). Review on fluoride-releasing restorative materials-Fluoride release and uptake characteristics, antibacterial activity and influence on caries formation. Dental Materials. Elsevier. https://doi.org/10.1016/j.dental.2006.01.022
  16. Referans16 Wilson, A. D., & Kent, B. E. (1972). A new translucent cement for dentistry. The glass ionomer cement. British Dental Journal, 132(4), 133–135. https://doi.org/10.1038/sj.bdj.4802810
  17. Referans17 Xie, D., Brantley, W. A., Culbertson, B. M., & Wang, G. (2000). Mechanical properties and microstructures of glass-ionomer cements. Dental Materials, 16(2), 129–138. https://doi.org/10.1016/S0109-5641(99)00093-7