Dergiler / Tekstil ve Konfeksiyon / 2026 / Volume: 25 Issue: 1

GİRDAP DÜZESİNİN GEOMETRİK ŞEKİLLERİNİN PERFORMANSA ETKİSİ

EFFECTS OF GEOMETRY ON THE PERFORMANCE OF SWIRL NOZZLE

Sayfa
—
Yayın Tarihi
2015-06-01
DOI
—
🏛️Bu makalenin bibliyografik verileri ve tam metin bağlantısı DergiPark üzerinden sağlanmıştır.
DergiPark Kaydı ↗
✨

Yapay Zeka Hızlı Bakış & Çıkarımlar

AI Insight
⚡ TL;DR(1 Cümlede Hızlı Çıkarım)

The circular swirl nozzle is found to produce better yarn properties, including S3 value (the total number of hairiness equal to or exceeding 3 mm per 10 m), breaking strength, and evenness than the elliptical swirl nozzle under similar processing parameters

📌 3 Maddede Bu Makale

🎯
Amaç & Hipotez:Placing a swirl nozzle composed of a yarn channel and an air-jet nozzle in a traditional ring spinning frame can reduce yarn hairiness.
📊
Temel Bulgular & Veri:Yarn performance is evaluated based on the hairiness, breaking strength, and evenness of the yarn.
💡
Sonuç & Katkı:The circular swirl nozzle is found to produce better yarn properties, including S3 value (the total number of hairiness equal to or exceeding 3 mm per 10 m), breaking strength, and evenness than the elliptical swirl nozzle under similar processing parameters
🔬Tür:Article
📍Kapsam:Genişletilmiş Akademik Örneklem
⚙️Değişkenler:Swirl nozzle · hairiness · yarn channel

Abstract

Placing a swirl nozzle composed of a yarn channel and an air-jet nozzle in a traditional ring spinning frame can reduce yarn hairiness. In this study, two types of swirl nozzles, namely, the circular swirl nozzle and the elliptical swirl nozzle, are designed to optimize the inside structure of the swirl nozzle and improve the yarn quality. Yarn performance is evaluated based on the hairiness, breaking strength, and evenness of the yarn. Experimental results show that the two types of swirl nozzles have effective effects on the ring yarn qualities compared with the traditional method. The mechanisms of the said effects can be explained via yarn de-twisting and re-twisting under the vortex action in the yarn channel. Yarn channels have different effects on yarn properties because of their different airflow patterns. The circular swirl nozzle is found to produce better yarn properties, including S3 value (the total number of hairiness equal to or exceeding 3 mm per 10 m), breaking strength, and evenness than the elliptical swirl nozzle under similar processing parameters

🔖

Bu Makaleye Atıf Yap

Hua, Q. H. L. Q. F. Y., Qiaoli, L., Ye, F. Y. (2015). GİRDAP DÜZESİNİN GEOMETRİK ŞEKİLLERİNİN PERFORMANSA ETKİSİ. Tekstil ve Konfeksiyon, Volume: 25 Issue: 1. https://ajindex.com/articles/1111534

📄 Tam Metin PDF Okuyucu

📄

PDF görüntüleyici hazırlanıyor...

Kaynakça (11)

  1. Yilmaz, D., Usal, M.R., 2011, "A comparison of compact-jet, compact, and conventional ring-spun yarns", Text Res J, vol: 81(5), pp: 459-470.
  2. Kumar, M.R., Parthiban, M., 2007, "Lubricated ring's effect on yarn quality hairiness, Indian Textile Journal, vol: 118(2), pp: 33-35.
  3. Jackowski, T., Cyniak, D., Czekalski, J., 2004, "Compact cotton yarn", Fibres Text East Eur, vol: 12(4), pp: 22-26.
  4. Nejad, A.S., Najar, S.S., Hasani, H., 2011, "Application of air-jet nozzle in short staple Siro spinning system", The Journal of the Textile Institute, vol: 102(1), pp. 14-18.
  5. Wang, X.; Chang, L., 2003, "Reducing Yarn Hairiness with a Modified Yarn Path in Worsted Ring Spinning", Text Res J, vol: 73(4), pp: 327-332.
  6. Wang, X., Miao,M., 1997, "Studies of JetRing Spinning Part 1:Reducing Yarn hairiness with the Jetring", Textile Res. J, vol:67(4), pp: 253-258.
  7. Rengasamy, R.S., Kothari, V.K., Patnaik, A., Bhatia, S.K., 2006, " Hairiness reduction in polyester spun yarns during ring spinning using air nozzles - Optimization of nozzle and other parameters", Indian J Fiber Text, vol:31(4) pp: 521-528.
  8. Patnaik, A., Rengasamy, R.S., Kothari, V.K., Ghosh, A., Punekar, H., Limited,F., 2005, "Hairiness Reduction of Yarns by Nozzles at Ring Spinning: Airflow Stimulation Approach", Journal of Textile and Apparel, vol:4(4), pp: 1-11.
  9. Qiu, H., Zhang, Y., Xu, Z., Ge, M., 2012, “A novel method to reduce hairiness level of ring spun yarn Fibers and Polymers", vol: 13(1), pp: 104-109.
  10. Qiu, H., Iemoto, Y., Tanoue, S., 2007, “Effects of Cross-sectional Shape of Yarn Duct of Interlacer on the Properties of Interlaced Yarn",Journal of Textile Engineering, vol.53(1), pp: 1-8.
  11. Qiu, H., Iemoto, Y., Tanoue, S., 2007, "Yarn Motion in Interlacers with Various Cross-sectional Shapes of Yarn Duct", Journal of Textile Engineering, vol: 53(2), pp: 59-67.