Dergiler / Tekstil ve Konfeksiyon / 2019 / Volume: 29 Issue: 4

EXPERIMENTAL INVESTIGATION OF THE PERFORMANCE OF A FEEDBACK TENSION CONTROL SYSTEM DESIGNED FOR WARPING MACHINES

Özge Çelik(BURSA ULUDAĞ ÜNİVERSİTESİ)
Recep Eren(BURSA ULUDAĞ ÜNİVERSİTESİ)
Merve İhtiyar(ULUDAĞ ÜNİVERSİTESİ)
Sayfa
—
Yayın Tarihi
2019-12-31
🏛️Bu makalenin bibliyografik verileri ve tam metin bağlantısı DergiPark üzerinden sağlanmıştır.
DergiPark Kaydı ↗
✨

Yapay Zeka Hızlı Bakış & Çıkarımlar

AI Insight
⚡ TL;DR(1 Cümlede Hızlı Çıkarım)

The feedback tension control system based on adjusting level of braking responded well to short, medium and long term tension variations and enabled unwinding tension control mostly within ±1 cN deviation from the adjusted value.

📌 3 Maddede Bu Makale

🎯
Amaç & Hipotez:This paper presents a research work which investigates experimentally the performance of a tension control system realized by a controlled disc brake.
📊
Temel Bulgular & Veri:An experimental set-up was established by using a creel with step motor controlled disc brake, laser distance sensor, yarn tension sensor and a 2-unit winding machine.
💡
Sonuç & Katkı:The feedback tension control system based on adjusting level of braking responded well to short, medium and long term tension variations and enabled unwinding tension control mostly within ±1 cN deviation from the adjusted value.
🔬Tür:Research Article
📍Kapsam:Genişletilmiş Akademik Örneklem
⚙️Değişkenler:warping · tension control · creel

Abstract

This paper presents a research work which investigates experimentally the performance of a tension control system realized by a controlled disc brake. An experimental set-up was established by using a creel with step motor controlled disc brake, laser distance sensor, yarn tension sensor and a 2-unit winding machine. A software was developed in C programming language to read yarn tension and bobbin diameter data and then to control the disc brake by step motor drive. Experimental investigation was carried out with three different cotton yarn counts and unwinding speeds. It was shown that yarn tension changed from full to empty bobbin at a significant amount depending mainly on yarn number and unwinding speed. The feedback tension control system based on adjusting level of braking responded well to short, medium and long term tension variations and enabled unwinding tension control mostly within ±1 cN deviation from the adjusted value.

🔖

Bu Makaleye Atıf Yap

Çelik, Ö., Eren, R., İhtiyar, M. (2019). EXPERIMENTAL INVESTIGATION OF THE PERFORMANCE OF A FEEDBACK TENSION CONTROL SYSTEM DESIGNED FOR WARPING MACHINES. Tekstil ve Konfeksiyon, Volume: 29 Issue: 4. https://doi.org/10.32710/tekstilvekonfeksiyon.552034

📄 Tam Metin PDF Okuyucu

📄

PDF görüntüleyici hazırlanıyor...

Kaynakça (10)

  1. Eren, R. (2009). Dokuma Hazırlık Teknolojisi. Bursa: MKM Yayınları.
  2. Karl Mayer. (2019, 03 20). Yarn tensioners/ yarn stop motions. Retrieved from https://www.karlmayer.com/en/products/warp-preparation/creels/yarn-tensioners-yarn-stop-motions/
  3. Fernando, E. & Kuruppu, R.U. (2015). Tension Variation in Sectional Warping, Part I: Mathematical Modeling of Yarn Tension in a Creel. International Journal of Engineering and Advanced Technology, 4(3), 158-164.
  4. Isakov, N. P. (1961). Yarn Tension in a Balloon. Tech. of Textile Industry U.S.S.R., 2, 92-98.
  5. Dorgham, M. E. (2013). Warping Parameters Influence on Warp Yarns Properties: Part 1: Warping Speed and Warp Yarn Tension. Journal of Textile Science and Engineering, 3(132). doi:10.4172/2165-8064.1000132.
  6. Beerli, M. & Guntli, E. (1989). Apparatus for regulating the warp section tension during warping, US Patent, Patent No: US4819310A.
  7. Zeller, H.P., Bollen, M., Spari, A. & Hane, S. (2003). Process for the operation of a bobbin creel and bobbin creel for a winding system, US Patent, Patent No: US6513748B2.
  8. Kleiner, A. & Jakob, A. (2010). Method and device for operating a creel designed for a winding system and corresponding creel, US Patent, Patent No: US7770271B2.
  9. Baba, Y. (1991). Tension controller for warping machine and warping method, US patent, Patent No: US5027484A.
  10. Çelik, Ö. (2018). Bobin Sağımında İplik Gerginliğine Etki Eden Faktörlerin Deneysel Araştırılması (Doctoral dissertation). Uludağ Üniversitesi Fen Bilimleri Enstitüsü Tekstil Mühendisliği Anabilim Dalı, Bursa.