Dergiler / Tekstil ve Konfeksiyon / 2026 / Volume: 36 Issue: 2

Sensorial Comfort Behavior of Cut Protective Fabric Woven from High-Performance Core Spun Yarn

Md. Zayedul Hasan(Indian Institute of Technology Delhi)0009-0002-5055-475X
Rochak Rathour(Indian Institute of Technology Delhi)0000-0001-7522-2458
Apurba Das(Indian Institute of Technology Delhi)0000-0002-8134-5064
Ramasamy Alagirusamy(Indian Institute of Technology Delhi)0000-0002-8835-7535
Nandan Kumar(High Performance Textile Pvt. Ltd. Haryana)0000-0001-6467-2947
Sayfa
—
Yayın Tarihi
2026-07-01
🏛️Bu makalenin bibliyografik verileri ve tam metin bağlantısı DergiPark üzerinden sağlanmıştır.
DergiPark Kaydı ↗
✨

Yapay Zeka Hızlı Bakış & Çıkarımlar

AI Insight
⚡ TL;DR(1 Cümlede Hızlı Çıkarım)

The findings offer valuable guidance for optimizing protective clothing that balances enhanced cut resistance with improved wearer comfort.

📌 3 Maddede Bu Makale

🎯
Amaç & Hipotez:Objective evaluation of sensorial comfort in cut-resistant protective clothing is crucial to meet user quality expectations and manufacturing standards.
📊
Temel Bulgular & Veri:This study investigates the effects of core-sheath ratio and yarn twist level on the sensorial comfort properties of cut-resistant fabrics produced from high-performance core-spun yarns.
💡
Sonuç & Katkı:The findings offer valuable guidance for optimizing protective clothing that balances enhanced cut resistance with improved wearer comfort.
🔬Tür:Research Article
📍Kapsam:Genişletilmiş Akademik Örneklem
⚙️Değişkenler:Cut resistance fabric · high-performance core spun yarn · sensorial comfort

Abstract

Objective evaluation of sensorial comfort in cut-resistant protective clothing is crucial to meet user quality expectations and manufacturing standards. This study investigates the effects of core-sheath ratio and yarn twist level on the sensorial comfort properties of cut-resistant fabrics produced from high-performance core-spun yarns. Stainless steel filament fibre (30–50 µm) was used as the core, with polyester and high-performance polyethylene (HPPE) blended fibres as the sheath. Twelve 6-end satin weave fabric samples were produced by varying three twist levels (500, 600, 700 m⁻¹) and core-sheath ratios, while maintaining constant yarn count, warp/weft density, and fabric weight. The Kawabata Evaluation System was employed to assess tensile, shear, bending, compression, and surface properties. Results revealed that fabrics with lower bulk density, higher core-sheath ratio, and lower yarn twist exhibited superior sensorial comfort. The findings offer valuable guidance for optimizing protective clothing that balances enhanced cut resistance with improved wearer comfort.

🔖

Bu Makaleye Atıf Yap

Hasan, M. Z., Rathour, R., Das, A., Alagirusamy, R., Kumar, N. (2026). Sensorial Comfort Behavior of Cut Protective Fabric Woven from High-Performance Core Spun Yarn. Tekstil ve Konfeksiyon, Volume: 36 Issue: 2. https://doi.org/10.32710/tekstilvekonfeksiyon.1766245

📄 Tam Metin PDF Okuyucu

📄

PDF görüntüleyici hazırlanıyor...

Kaynakça (47)

  1. Mao, L., Yu, H.,Yao, L., Shen Y., Yan X., Ma Y.2024. Cut/Puncture Resistance and Mechanisms of Protective Composite Textiles Reinforced with Inorganic Powder. Materials & Design, 237(55), 1-13. https://doi.org/10.1016/j.matdes.2023.112575
  2. Islam, M. A., Rathour, R., Kumar, B., Das, A.2025. Mathematical model for calculating breaking energy of component yarns in dual-sheath single-core hybrid yarn. Tekstil ve Mühendis,32(137),1-13. https://doi.org/10.7216/teksmuh.1563481
  3. Natarajan, G., T., P. R., Hurren, C., R., P. 2025.Critical properties of cotton, UHMWPE, and para-aramid blended fabrics for protective clothing applications. The Journal of The Textile Institute,1-10. https://doi.org/10.1080/00405000.2025.2474764
  4. Żyłka, E.,Irzmańska, E., Saramak, J., Kowalska, M. J.2024. Functional 3D-Printed Polymeric Materials with Metallic Reinforcement for Use in Cut-Resistant Gloves. Materials, 17(1), 1-16.https://doi.org/ 10.3390/ma17010090
  5. Ertekin, M., Erhan Kirtay, H.2016. Cut resistance of hybrid para-aramid fabrics for protective gloves. The Journal of The Textile Institute, 107(10), 1276-1283. https://doi.org/10.1080/00405000.2015.1100820
  6. Rebouillat, S., Steffenino, B., Casas, A. M. 2010. Aramid, steel, and glass: characterization via cut performance testing, of composite knitted fabrics and their constituent yarns, with a review of the art. Journal of Materials Science, 45, 5378-5392. https://doi.org/10.1007/ s10853-010-4590-5
  7. Jiang,F., Su, T., Fang, L., Zhao, K., Cong, H.2024. Research on the development and performance of flexible protective fabrics with knitted structure. Textile Research Journal,95 (7-8),836-849. https://doi.org/ 0.1177/00405175241273959
  8. Hasan, M.Z., Rathour, R., Das, A., Alagirusamy, R., Kumar, N.2025. Thermophysiological comfort characterization of cut-protective fabric consisting of metallic core-covered yarn. International Journal of Occupational Safety and Ergonomics,1-10. https://doi.org/10.1080/ 10803548.2025.2463793
  9. Dianat, I., Haslegrave, C. M., Stedmon, A.2012. Methodology for evaluating gloves in relation to the effects on hand performance capabilities: A literature review. Ergonomics, 55(11), 1429-1451. https://doi.org/10.1080/00140139.2012.708058
  10. Nayak, R.K., Punj, S.K., Chatterjee, K.N., Behra, B.K. 2009. Comfort properties of suiting fabrics. Indian Journal of Fibre and Textile Research, 34(2), 122-128.
  11. Wang, L., Xu, N., Yan, X., Guo, Y., Ma, Y.2024. Preparation and the influence of twist factor on cut resistance performance of Kevlar short fiber covered yarn fabric. The Journal of The Textile Institute,1-8. https://doi.org/10.1080/00405000.2024.2426876
  12. Kocik, M., Żurek, W., Krucinska, I., Geršak, J., Jakubczyk, J.2005. Evaluating the bending rigidity of flat textiles with the use of an Instron tensile tester. FIBRES & TEXTILES in Eastern Europe,13 (2), 31-34.
  13. Paulina, K., Emilia, I., Sawicki, J.2022. Preliminary Experimental Investigation of Cut-Resistant Materials: A Biomimetic Perspective. Autex Research Journal, 22 (4),411-418. https://doi.org/10.2478/aut-2021-0006
  14. Sular, V., Okur, A.2007.Sensory evaluation methods for tactile properties of fabrics. Journal of Sensory Studies, 22(1), 1-16. https://doi.org/ 10.1111/j.1745-459X.2007.00090.x.
  15. Demiryürek,O., Uysaltürk, D.2013. Thermal comfort properties of Viloft/cotton and Viloft/polyester blended knitted fabrics. Textile Research Journal, 83 (16), 1740-1753. https://doi.org/10.1177/ 0040517513478458
  16. Atalie, D., Tesema, A. F., Rotich, G. K. 2018. Effect of weft yarn twist level on thermal comfort of 100%cotton woven fabrics. Research Journal of Textile and Apparel, 22(3), 180-194. https://doi.org/ 10.1108/RJTA-11-2017-0049
  17. Mukhopadyhay, A., Dash, A., Kothari, V. K. 2002.Thickness and compressional characteristics of air-jet textured yarn woven fabrics. International Journal of Clothing Science and Technology, 14 (2), 88-99. https://doi.org/ 10.1108/09556220210424198
  18. Nawaz, N., Troynikov, O., Watson, C. 2011. Evaluation of Surface Characteristics of Fabrics Suitable for Skin Layer of Firefighters’ Protective Clothing. Physics Procedia, 22(9), 478-486. https://doi.org/ 10.1016/j.phpro.2011.11.074
  19. Özdemir, H. 2017. Thermal comfort properties of clothing fabrics woven with polyester/cotton blend yarns. Autex Research Journal,17(2), 135-141. https://doi.org/10.1515/aut-2016-0012
  20. Das, A., Kothari, V., Balaji, M.2007. Studies on cotton–acrylic bulked yarns and fabrics. Part II: Fabric characteristics. The Journal of The Textile Institute, 98 (4), 363-376. https://doi.org/10.1080/ 00405000701550098
  21. Rita, P. B., Kercel, S. W.2003. Sensory substitution and the Human-Machine interface. Trends in Cognitive Sciences,7(12), 541-546. https://doi.org/ 10.1016/j.tics.2003.10.013
  22. Bensaid, S., Osselin, J. F., Schacher, L., Adolphe, D.2006. The effect of pattern construction on the tactile feeling evaluated through sensory analysis. The Journal of The Textile Institute, 97 (2), 137-145. https://doi.org/10.1533/joti.2005.0146
  23. Jeguirim, S. E.-G., Dhouib, A. B., Sahnoun, M., Cheikhrouhou, M., Njeugna, N., Schacher, L., Adolphe, D.2010. The tactile sensory evaluation of knitted fabrics: effect of some finishing treatments. Journal of Sensory Studies, 25(2), 201-215. https://doi.org/10.1111/j.1745-459X.2009.00251.x
  24. Du, Z., Yu, W. 2017. A comprehensive handle evaluation system for fabrics: I. measurement and characterization of mass and bending properties. Measurement Science and Technology,18(11), 3547-3554. https://doi.org/ 10.1088/0957-0233/18/11/039
  25. Cassidy, T., Weedall, P., Harwood, R. J. 1989. An Evaluation of the Effect of Different Yarn-spinning Systems on the Handle of Fabrics Part I: A Comparison of Ring-spun and Mule-spun Woollen Yarns. The Journal of The Textile Institute, 80(4), 537-545. https://doi.org/ 10.1080/ 00405008908658305
  26. Kimmel, L. B., Sawhney, A. P. S. 1990.Comparison of DREF-3 cotton yarns produced by varying yarn core ratios and feed rates. Textile Research Journal, 60 (12), 714-718. https://doi.org/10.1177 /004051759006001203
  27. Harper, R. J., Ruppenicker, G., Donaldson, D.1986. Cotton Blend Fabrics from Polyester Core Yarns. Textile Research Journal,56(2), 80-86. https://doi.org/10.1177/004051758605600202
  28. Radhakrishnaiah, P., Tejatanalert, S., Sawhney, A.1993. Handle and Comfort Properties of Woven Fabrics Made from Random Blend and Cotton-Covered Cotton/Polyester Yarns. Textile Research Journal, 63 (10), 573-579. https://doi.org/10.1177/ 004051759306301003
  29. Hasan, M.Z., Rathour, R., Das, A., Alagirusamy, R., Kumar, N.2025.Thermophysiological comfort characterization of cut-resistant workwear clothing using multicomponent high-performance core-spun yarn. Research Journal of Textile and Apparel. https://doi.org/10.1108/RJTA-12-2024-0207
  30. EN ISO 13997,1999.Protective clothing-mechanical properties-determination of resistance to cutting by sharp object.
  31. Kawabata, S., Niwa, M.1989. Fabric performance in clothing and clothing manufacture. The Journal of The Textile Institute,80(1), 19-50. https://doi.org/10.1007/s12221-017-6746
  32. Houshya, S., Padhye, R., Nayak, R.2017. Effect of moisture-wicking materials on the physical and thermophysiological comfort properties of firefighters’ protective clothing. Fibers and Polymers, 18(2), 383-389 (2017). https://doi.org/10.1007/s12221-017-6746
  33. Behra, B. K., Shakyawar, D. B. 2000. Structure-property relationship of fibre, yarn and fabric with special reference to low-stress mechanical properties and hand value of fabric. Indian Journal of Fibre and Textile Research,25(3), 232-237.
  34. Sun, D.2017. High-Performance Apparel. In McLoughlin, J., Sabir, T. (Eds), Fabric handle as a concept for high-performance apparel. Cambridge: Woodhead Publishing, 307–323.
  35. Kawabata, S., Niwa, M. 1991.Objective measurement of fabric mechanical property and quality: Its application to textile and clothing manufacturing. International Journal of Clothing Science and Technology, 3(1), 7-18. https://doi.org/10.1108/eb002968
  36. Behera, B. K., Hari, P. K. 2010. Woven Textile Structure: Theory and Applications. Cambridge: Woodhead Publishing.
  37. Kayseri, G.Ö., Özdil, N., Mengüç, G.S.2012. Sensorial Comfort of Textile Materials. In Jeon,H.Y. (Ed),Woven Fabrics. New York: Intech Open. https://doi.org/10.5772/37596
  38. Pavlinic, D. Z., Gersak, J. 2003. Investigations of the relation between fabric mechanical properties and behaviour. International Journal of Clothing Science and Technology,15(3/4), 231-240. https://doi.org/ 10.1108/09556220310478332
  39. Mukhopadyhay, A., Dash, A. K., Kothari, V. K.2002.Thickness and compressional characteristics of air-jet textured yarn woven fabrics. International Journal of Clothing Science and Technology,14(2), 88-99. https://doi.org/ 10.1108/09556220210424198
  40. Ajayi, J.O. 1992. Effects of fabric structure on frictional properties. Textile Research Journal, 62(2), 87-93. https://doi.org/10.1177/ 004051759206200205
  41. Ertekin, M., Erhan Kirtay, H.2016. Cut resistance of hybrid para-aramid fabrics for protective gloves. The Journal of The Textile Institute, 107(10), 1276-1283. https://doi.org/10.1080/00405000.2015.1100820
  42. Jiang,F., Su, T., Fang, L., Zhao, K., Cong, H.2024. Research on the development and performance of flexible protective fabrics with knitted structure. Textile Research Journal,95 (7-8),836-849. https://doi.org/ 0.1177/00405175241273959
  43. Rita, P. B., Kercel, S. W.2003. Sensory substitution and the Human-Machine interface. Trends in Cognitive Sciences,7(12), 541-546. https://doi.org/ 10.1016/j.tics.2003.10.013
  44. Jeguirim, S. E.-G., Dhouib, A. B., Sahnoun, M., Cheikhrouhou, M., Njeugna, N., Schacher, L., Adolphe, D.2010. The tactile sensory evaluation of knitted fabrics: effect of some finishing treatments. Journal of Sensory Studies, 25(2), 201-215. https://doi.org/10.1111/j.1745-459X.2009.00251.x
  45. Du, Z., Yu, W. 2017. A comprehensive handle evaluation system for fabrics: I. measurement and characterization of mass and bending properties. Measurement Science and Technology,18(11), 3547-3554. https://doi.org/ 10.1088/0957-0233/18/11/039
  46. Harper, R. J., Ruppenicker, G., Donaldson, D.1986. Cotton Blend Fabrics from Polyester Core Yarns. Textile Research Journal,56(2), 80-86. https://doi.org/10.1177/004051758605600202
  47. Kawabata, S., Niwa, M.1989. Fabric performance in clothing and clothing manufacture. The Journal of The Textile Institute,80(1), 19-50. https://doi.org/10.1007/s12221-017-6746